REPAIR/MAINT TO JOINERY, FALSE CEILING, ROOF SHEETS, HARDSTANDING AND CERTAIN BR REPAIR WORK AT POCKET 9 IN AGE BR III SAHARANPUR UNDER GE ROORKEE

Amount

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but n. exceeding 4 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm each.

M&L for resecuring or easing of door / window shutter n.exc 1.00 sq m in size without taking down and making operation in all respects complete all as directed.

M&L for resecuring or easing of door / window shutter exc 1.00 and n.exc 2.00 sq m in size without taking down and making operation in all respects complete all as directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint.

S & F pressed steel frame size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

S & F pressed steel frame size 125x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate,etc complete all as specified supplied and fixed.

S &F factory made Flush shutters, solid core construction 30mm thick with block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), 1983 complete all as specified and directed.

S&F 35 mm thick IInd class HW Factory Made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkatsall as specified.

S&F powder coated aluminium anodised frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc, (thickness of powder coating not less than 50 micron) complete all as specified and directed.

S&F powder coated aluminium anodised window/ventilator shutter side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised powder coated aluminium snap beading screws,B-21 type aluminium butt hinges 100mm long-02 Nos on each shutter, peg stays 150mm long 01 Nos, hold fast etc. (thickness of powder coating not less than 50 micron) complete all as specified and directed. Note :- (i) Fixing of shutter with all powder coated fittings shall be as per manufactures instruction. (ii) Rate quoted is deemed to be inclusive of aluminium hardware as indicated, glazing clips, rubber packing, hinges, anodised aluminium snap on beading for fixing glass panes in frame, handles, locking arrangement but gla ss panes in frame shall be measured and paid separately under respective Sch items separately at supply only rates.

S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0.

Supply only sheet glass, tinted, 4mm thick, glazing in aluminium frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed.

S & F 2 nd class hard wood small fittings such as door and window stops and cleats including all necessary articles not exceeding 200 cu cm each

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.(Make:-Rajshri,Sintex)

S&F Factory made solid panel PVC door shutter o 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame rails welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, and S&F in the frame at side as per specification and drawing complete all as specified and as directed by Engr -in- charge.( Make: Rajshri, Sintex)

Dismantling of wrought Iron or mild steel work of any description not otherwise provided for such as wind ties, valley gutter, supports steel windows, door etc complete all as specified and directed by Engr - in - charge..

S&F Factory Made steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.

S&F Factory Made steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe- 290 (Gde E- 165) complete

M&L PCC(1:3:6) type C1 as in bed blocks for hold fast including necessary formwork complete.

S & F mild steel flat iron as in hold fast clamps small articles conforming to FE 290 GDE -E- 165.

S & F 100mm size butt hinges cold rolled mild steel medium weight, ISI marked complete all as specified and directed.

All as per item No - 24 here in berfore- but 50mm size.

S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 150 mm size Aluminium anodised handles cast type,ISI marked complete all as specified and directed.

S&F in repair mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete.

S&F mild steel sliding door bolts,300 mm long plate type, stove enameled black with bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames, glazed with putty or fixed with beads complete.

S&F 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane.

S&F in repair 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt.

S & F for galvanised stainless steel wire mess 0.36mm nominal dia of wire and average width of appearature 1.18mm fixed with tinned tack or galvanised wire staples complete all as specified and directed.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks,or galvanised wire staples as in repair.

S/F in repairs harrison rails, mild steel,chromium plated curtain rods with brackets, including fixing stops,rollers bracket etc complete all as specified and directed.

M&L for preparation of newly steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide.

M&L for preparation of wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint.

Materials and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 meter mean radius with old size bricks built in CM 1:6, including demolition of old bricks in cement mortar complete all as specified & as directed.

S & F in repairs door closer hydraulically regulated designation no. 1 universal type , suitable for door shutters upto 700mm in widht and of weight between 61 to 80 Kg and fixed

Taking down old cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing downwith water, etc complete all as specified.

M & L for rendering 12 mm thick on wall in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement and Preparation of new plaster surfaces of wall and applying 1mm thick wall putty and two coat of oil bond distemper complete all as specified and as directed by Engr -in- charge .(Make -BERGER, ASIAN PAINT OR NEROLAC)

M&L for rendering 15 mm thick in cement mortar 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) and preparation of new plaster surfaces of wall and applying two coats cement based paint over one coat alkali resistant priming paint complete all as specified and as directed by Engr -in- charge .

Taking down wall/ceiling boards Asbestos plywood of any thickness incluing cover fillets all as specified and dirrected by Engr-in-charge.

S&F powder coated Everest ceiling grid system of grid size 600x600 mm fixed to walls with rawl plugs and screws and hang to roof members with 3 mm dia GI wire comprising main tee of size 38 mm x 24 mm x 0.30 mm , cross tee of size 28 mm x 24 mm x 0.40 mm with and incl S&F of 4 mm thick everest designer ceiling (E- board clasic) board/tiles for insulation and acoustic purpose 595 x 595 mm size fixed with steples on snap grid as in ceiling complete all as specified and directed

Dismantling asbestos cement corrugated ,semi corrugated, ridge etc sheets in roof covering complete all as specified and directed.

Dismantling plain of corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr - in - charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr - in - charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engr - in - charge..

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.completeall as specified

M&L PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in levelling courseat roof padding (avg thickness 40mm)complete all as specified.

M&L for Taking down existing roof treatment from roof and cleaning with wire brush to remove all loose particles and washing with water including removing the debris up to 100M distance including picking, sweeping clean and washing down with water to remove dust & plastering in CM 1:3 , 15 mm average thickness over the roof surface using water proofing compound (including WPC @ 3% by weight of cement) as per manufacturer direction including finished even and fair without extra cement , complete all as specified and described as under:- (a) Preparation of surface and applying one coat of polymeric primer @ 0.30 kg/Sqm. (b) Supply & providing APP based polymeric water proofing membrane 3 mm thick of weight not lwss than 3.60 kg / sqm reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) centre core including coating the surface with the compatible primer and torch application of membrane with 10 cm overlaps as required thereof, complete all as specified and directed. (c) Applying one coat of polymeric modified bitumen 85/25 @ 1.2 kg /sqm over with one coat of aluminium bituminous paint @ 0.20 kg/sqm shall be applied. NOTE :- The work of water proofing treatment shall be got executed through expert team of manufactures' or authorised applicator of manufacturer complete all as specified and directed by Engr - in - charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified.

M & L for precast machine pressed cement concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thick M-35 grade, glossy type with grey cement and pigment laid dry over and including a layer of 25 mm thick sand cushioning complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in hardstanding, Plinth protection, path etc 75 mm thick finished even and smooth without using extra cement complete with Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm grade stone aggregate as in coping, weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed.

M&L for Granite (of any type) tiles 20mm thick machine cut,over 20 mm thick cement screed (1:6) base laid, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, dismentling of old tiles with cement mortar bedding and removing off the premises complete all as specified and directed.

Dismantling of timber scantling under 40 sqcm in purlins etc.

Dismantling timber scantlings 40 sq. cm and over in section, in any position

S&F Rolled sections as in main beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to I. S.1161- 1979 grade St.-240

M&L for machine cut kota stone slab flooring 20-25 mm thick over 20 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish,including dismentling of old tiles with cement mortar bedding and removing off the premises complete all as specifed and directed complete all as specified and directed

M&L for Kota stone slab 20-25 mm thick in skirting, etc over 15 mm thick cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish, including dismentling of old tiles with cement mortar bedding and removing off the premises complete all as specifed and directed.

KISHORE CHAND DINESH CHAND

AMARJEET SINGH AND CO.

VINAYAK CONSTRUCTION COMPANY

M/s Inderlal

SR CONSTRUCTIONS

ANEJA AND COMPANY