SPECIAL REPAIRS TO BLDG NO P-102 AT CMP CENTER AND SCHOOL UNDER GE (SOUTH) BANGALORE

Amount

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing, Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile 0.06sqm cut from tiles of area exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 etc including taking down cement plaster complete all as specified and as directed..

Dismantling floor hearth/ stone slabs/mosaic tile flooring or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to stores and rubbish off the premises out side the MD land complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed of 15mm thick in CM 1:6 etc complete all as specified and directed.

M&L for coloured glazed ceramic tile in vertical surface 350x250x7mm /450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering CM 1:4 backing coat complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified.

S&F in repair CPVC pipes 25mm outer diameter SDR 11 and Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified.

S&F in repair of CPVC pipes 20mm outer diameter SDR 11 and Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.

S&F 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F 20 mm dia male brass threaded adapter complete all as specified and as directed.

S&F 20 mm dia female brass threaded adapter complete all as specified and as directed.

S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismantling and removing to store all as specified

S&F 1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including dismantling and removing to store all as specified

S&F 25 mm bore nipple suitable for HDPE water tank. (Min wt 45 gms) complete all as specified.

Supplying and laying of CPVC ball valve( Gate valve) 25mm dia complete all as specified.

S&F 25 mm internal bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-450gms) complete, fixed in repairs, all as specified.

Supplying and laying of CPVC Union 25mm dia complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) 'P' or 'S' trap including dismantling of old Water closet complete all as specifed and as directed.

S&F in repairs plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float, handle, bracket PVC short bend/ long bend etc. complete all as specified and directed .

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin, white, Oval type size 520x450x200mm including one number brass CP waste coupling, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repairs 32mm waste pipe for WHB complete all as specified and as directed

S&F in reapirs 15 mm bore brass CP two way bib taps with crutch or butterfly handle,screwed down,screwed for pipe or for brass ferrule complete all as specified.

S&F in repairs 15 mm bore diameter brass CP wall mixture any type complete all as specified and as directed.

S&F in repairs 75mm dia PVC (SWR) floor/Nahani trap, plain with 100mm SS grating including solvent cement incl dismantling of old any type Nahani/floor trap and also necessary filling s requeired complete all as specified and as directed.

S&F pillar taps, tall height brass,fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed.

S&F in repairs angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed.

S&F in repairs PVC connection 15 mm size , 600mm long with PTMT adopter,check nuts and washer on both sides for hot water complete all as specified.

S&F in repairs stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed .

S&F in repairs Pressure adjustable shower rose 15mm of brass chromium plated with shower arm of 190mm Long Light Body complete all as specified and directed.

S&F in repairs SS soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repair for Glass stainless steel corner Shelf Complete all as specified and as directed.

S&F in repair Cabinet Mirror 300mmX450mm complete all as specified.

S&F in repairs tubular towel rail 600 mm long of brass chromium plated 20 mm dia D type 60 cm long fixed with two plugs (gutties) of 2nd class hard wood embedded in cement mortar 1:3 with MS screws complete all as specified.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed.

S&F PVC bends any radius 75mm dia complete all as specified and as directed.

S&F PVC bends any radius 110mm dia complete all as specified and as directed.

S&F PVC Single T any radius 110 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) 110 mm vent cowl complete all as specified and as directed.

S&F in repairs PVC(SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

S&F in repair PVC(SWR) pipes 75mm bore single socketed , in any length with rubber ring joints, fixed to walls including dismantling and breaking of pipe and fittings complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n exc 4 Sqm etc complete all as specified and as directed.

Taking down of shutter exc 1.0 sqm but n.exc 2.0 sqm each

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 etc. complete, as specified,

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in position with hold fast, complete all as specified and directed by Engr-in-Charge.(Cost of hold fast included in the unit rate of this item.) complete all as specified.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 30mm thick factory made Flush shutters, solid core construction, with particle board core and plywood face panels,complete all as specified.

S&F 30mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze,etc.(withoutsash bars), divided in to squares with edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.complete all as specified and as directed.

S&F cold rolled mild steel butt hinges medium weight of size 100mm fixed complete all as specified and as directed.

S&F cold rolled mild steel butt hinges medium weight of size 125mm fixed complete all as specified and as directed.

S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.

S&F 150 mm size extruded aluminium alloy handles fabricated type with plate anodized complete all as specified.

S&F 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down of shutter not exc 1.0 sqm each complete all as specified.

S&F 18/ 19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative type laminations with screws including PVC edge bidding confirming to IS 12823-1990 complete all as specified

S&F in repairs mild steel 150 mm helical door springs including roller and roller plate complete (Helical door spring) including welding to steel chowkhats if required all as specified.

S&F floor door stopper(double) of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door overall length of cover plate 150mm complete all as specified.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge

S&F 4 mm thick figured glass pin headed type and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified.

S&F in repairs sheet glass ordinary quality 4mm thick in square not exc 0.50 Sqm each pane glazing with oil putty, clip in metal frameand wooden beading in wooden frame including hacking out of old broken glass complete all as specified.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F in repairs 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified.

S&F in repairs 150 mm long aluminium anodized barrel tower bolts of extruded section complete all as specified.

S&F in repair 250 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets cast or extruded sections or cast aluminium alloy complete all as specified.

Taking down cement plaster including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed..

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finshed even and fair including taking down, raking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premises complete all as specified and as directed.

M&L for 1mm thick wall care putty complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete wall surfaces and finish the surface even and fair without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of oil bound emulsion over a coat of 1mm wall care putty complete all as specified and directed .

M&L for preparation of newly plastered surfaces of Wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including all necessary safety norms to the workers all as specified and as directed.

M&L for washing, rubbing and brooming for preparation of existing surface and cleaning with water for old painted surfaces of walls and applying one coat of oil emulsion distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings,etc. complete all as specified and as directed.

M&L for washing, rubbing and brooming for preparation of existing surfaces and cleaning with water for old painted surfaces of walls and applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty, including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood work and joinery exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for washing, rubbing and brooming for preparation of existing old decorated wall surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl all necessary safety norms to the workers all as specified and directed.

M&L for preparation of new surfaces of steel and iron work n exc 10 cm width or girth and applying Two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for 18-20 mm thick Granite black colour including rounding edges to exposed portion as in platforms for wash hand basin / sink (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid in cement mortar 1:4,10mm thick including pointing in white cement 1:2 using mable dust with admixture of pigments to match with shade granite including cutting for securing of slab,including after dismantling of existing any type of stone or concrete etc complete all as specified and as directed.

Taking down copper / aluminium point wiring ( light, fan, socket or power) complete, including fitting & fixtures such as switches, ceiling roses, pendants, regulators, sockets , light fitting etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated, unsheathed cable 1100 volts grade multistranded copper conductors drawn through and including PVC conduit and its accessories fixed on surface of walls/ceilings etc including 1.6mm thick pressed steel terminal boxes concealed in walls covered with plastic laminated sheet top cover 3mm thick fixed with cadmium plated or brass screws for housing switches, socket outlets, fan regulators etc including provision of 1.5 Sqmm single core PVC insulated unsheathed copper cable with multistranded conductors as earth continuity wire connected to common earth dolly all as specified and as directed for :-

One light point controlled by one switch

One bell point controlled by one switch

One fan point controlled by one switch.

One 3 pin 5 Amps socket point on the same board with other switches

One 3 pin 5 Amps socket outlet point on independent board

All as per item No 3 here in before but wiring with 2.5 sqmm unsheathed single core PVC insulated multistranded copper conductor for 3 pin 15 Amps socket outlet

S&F call bell, musical type, 230 volts AC single pole complete all as specified and as directed.

S&F switch piano, flush type single pole, one way 5 Amps complete all as specified and as directed.

M&L switch socket combination 2 in 1, 3 pin, 5 Amps and 15 Amps flush type universal complete all as specified and as directed.

M&L switch socket outlet 2in1, 3pin,5A complete all as specified and as directed.

S&F steped type electronic fan regulator flush type, 230 volt, AC complete all as specified and as directed.

S8F ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and as directed.

Taking down unserviceable main switch/DB, Teak wood boards etc

S&F Sheet metal enclosure SPN for DB's when MCB's to be used with 200 amps rated bus bar double door 16 way. (for Main incoming)

S&F Sheet metal enclosure TPN for DB's when MCB's to be used with 200 amps rated bus bar double door 4 way. (For staircase 1,2,3)

S&F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way with 200 Amps rated bus bar , 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including complete all as specified and as directed.

S&F MCB triple pole and neutral 32 to 63 Amps, 415 Volts

S&F MCB DP 32Amps

S&F MCB single pole, 240 volts 6 to 32 Amps,

S&F LED light fitting mirror type with high out put diffuser 2 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Taking down ceiling fan of any sweep, dismantling, replacing defective part, overhauling, cleaning, greasing, rewinding, etc and hanging up/fixing back in the original position, connecting up and testing complete all as directed. NOTE: (a) The unit rate quoted shall be deemed to include replacing minor items viz nuts, bolts split pin and rubber wheel etc. (b)Capacitor & bearing shall be measured and paid separately under relevant items of this schedule. (c) Rewinding of fan will be measured and paid for separately under relevant item of this schedule.

Supply and fix in repairs capacitor of 2.5 mfd for ceiling fan/exhaust fan complete all as specified and directed.

Supply and fix in repairs bearing No. 6201/6202/6203 suitable for ceiling fan/exhaust fan complete all as directed.

M&L for removing of burnt out winding wire from ceiling fan of any make and size of 1200 mm to 1400 mm sweep including cleaning of slots etc and rewinding with super enamelled copper winding wire as per existing size/gauge including insulating material, varnishing and drying complete all as specified and directed.

M&L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.complete all as specified and directed by Engr-in-charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

M&L for cutting,grinding , welding of exsiting steel window/Wooden window frame/grill , removal of wire mesh and glass panel and fixing 10mm thick ply wood for fixing of PVC exhaust fan fixing arrangement including making good to distrubed surfaces matching with existing complete all as specified and directed by Engr in Charge.

Srisrinivasaenterprises

SREE BALAJI CONSTRUCTIONS

docileworx

S L R Construction

SCION ENTERPRISES

Elite Constructions