CWE/HSR-29 OF 2021-22

Amount

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete incl taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings suxh as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete and directed by engr in charge

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment all as specified

All as per item No 2.00 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on indep board

All as per item No 2.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board

All as per item No 2 above but point wiring with 4 sq mm single core FR cables and earth continuity wire with 4 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on indep bd.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular switch 1 way 16A 1 module all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed

S&F modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed

S&F modular fan step regulator 120W-2 modules uiatable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed

Supply & Fixing LED tube fitting 1x18/20 W,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F i Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

S&F i Sheet metal enclosure distribution board SPN,12 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

S&F i Sheet metal enclosure distribution board VTPN,4 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing MCBs SP 6 to 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 32Amps to 63 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB

Supply and fixing MCCBs TP 63 Amps 240 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :-Note : Make of the MCB should be the same as that of DB

Supply & fixing in replacement of Bldg security light fitting LED 35 W, pressure die cast housing epoxy powder coating IP -65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable all as specified and directed.

Taking down old U/S submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for submain wiring alongwith earth wire with the 2x6.0 sq. mm +1x6.0 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in recessed in PVC rigid non metallic concealed conduit 19/20mm dia medium duly ISI marked to be terminated as required including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment all as specified

M & L for submain wiring alongwith earth wire with the 2x04 sq. mm +1x04 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in recessed in PVC rigid non metallic concealed conduit 19/20mm dia medium duly ISI marked to be terminated as required including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment all as specified

M&L in replacement for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground vertically (in earth pit not less than 2.25 metre deep below ground level) with the top edge of earth plate at a depth not less than 1.5 metre below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI earth wire 4 mm dia bolted (with GI nuts, bolts & check nuts) and rivetted to earth (Plate) electrode at one end and connected to main switch board / DB at the other, earth wire protected by and incl GI pipe 15 mm dia (medium grade) from top of electrode to main switch board and also incl watering pipe GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover etc all as shown on electrical plate No 3 of SSR - 2009 Part I.

Taking down old U/S XLPE UG cable complete all as specified and directed.

Supply ,lay,jointing,commissioning and testing LT Cable XLPE Insulated,armoured electric power cable with aluminium conductor (heavy duty) 1100 volt grade, 16 Sqmm 2 core,laid in trenches/duct or fixed to wall /passing through pipe with suitable size cable glands,cable lugs, complete all as specified.

Supply ,lay,jointing,commissioning and testing LT Cable XLPE Insulated,armoured electric power cable with aluminium conductor (heavy duty) 1100 volt grade, 25 Sqmm 4 core,laid in trenches/duct or fixed to wall /passing through pipe with suitable size cable glands,cable lugs, complete all as specified.

Excavation in trunches, n.exc. 1.5 mtr wide and n. exc 1.5 mtr in depth for fdn, cable, pole, stay etc and getting out complete

Returning filling with earth obtained from excavation including spreading, watering and consolidating in layers not exc 25cm

Removing surplus soil to a distance not exc 50mtr and depositing where directed at a level not exc 1.5 mtr above the starting point

Sand filling in trenches with clean dry and unwashed including gently punning around cables complete all as specified

Supplying and laying Bricks; common burnt clay building bricks, sub-class ‘A’ designation 75 for cable protection for LT cable aid in trenches complete all as specified.

Material & labour for replacement of 40 mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable/earthing strip etc complete all as specified and directed.

S&F in fixing in replacement LED light Warm white 36 watt Recess Mounting type, with mounting arrangement ( Recess suitable for , 2x2 Grid Hanging) Sheet aluminium housing with high quality LGP and PMMA diffuser, Separate HPF driver suitable for armstrong and grid ceilling LED 240 volt along with fixing arrangements all as directed.

S&F in fixing in replacement LED light Warm white 36/42 watt surface Mounting, type, 3 Way mounting arrangement (Surface mounted, 2x2 ) Sheet aluminium housing with high quality LGP and PMMA diffuser, Separate HPF driver 240 volt along with fixing arrangements all as directed.

S&F in fixing in replacement LED light fittings complete 1x9, (2ft long) polycarbonate batten including LED Tube complete all as specified & directed.

S&F in replacement of security light bracket made to slhape out of GI pipe 40 mm bore light grade 1.5 mtr length and fixed with MS clamps of size 40x5 mm - 02 nos nuts, bolts and washers of wall all as specified and directed.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete

M/S RAJINDER SINGH

M/S RAJESH KUMAR & SONS

M/s Devendera construction

B B BUILDERS

LACHHMAN SINGH AND BROTHERS

YASHU CONTRACTORS

M/S Sulakh Brothers