Civil, Electrical and allied works for Infrastructure development, Construction of Playground with Boundary wall, Security Guard Room, Toilet and related /associated projects at Satrikh Dehat Village, Harakh, Barabanki under HAL CSR- activity 2024 2025

Surface dressing of uneven surface for making track, average depth not exc. 15 cm deep, cutting & filling, including cutting of wild growth, jungle, cutting and uprooting of plants/ wild vegetation etc. also removal of surplus earth, wild growths, plants etc as directed by EIC upto a lead of 150 Mtr with labour, T&P etc all complete as per direction of EIC.

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift, levellling, labour, T&P etc all complete as direction of E.I.C.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete etc. required for proper completion of work and as per specification and direction of E.I.C.

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.c.,including Dewatering if required ( including Providing and removing timbering as planking, shuttering and raking shores wherever required) etc., Complete as per specification, drawing and as directed by Engineer in charge.

--do all as above but excavation depth exceeding 1.50 m to 3.0 m depth .,including Dewatering if required ( including Providing and removing timbering as planking, shuttering and raking shores wherever required) etc., Complete as per specification, drawing and as directed by Engineer in charge

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift etc all complete as requried and directed by EIC.

Providing & laying PCC: 1:4:8 (1 cement: 4 coarse sand : 8, 40 mm size graded stone aggregate) in foundation, under floors or any other similar description of works, with mechanical mixing including necessary form work/shuttering, compaction, curing including, materials, labour, T&P etc, required for proper completion of the work as per specification & direction of EIC.

Providing & laying cement concrete 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregat 20 mm nominal size of Bahratcoop/Dala/Jhansi) in sub-structure upto plinth beam e.g. column fooling, plinthbeab, floor, pavement, drain or any other similar description of works etc including mechanical / manual mixing , wastage, compaction, curing also making contraction joints/grooves, if required with all labour, material, T&P etc all complete as per direction of EIC.

Providing & laying cement concrete 1:1.5:3 (1cement: 1.5 coarse sand : 3 graded stone aggregat 20 mm nominal size of Bahratcoop/Dala/Jhansi) in super structure i.e. above plinth beam eg. column, slab, beam, lintel, chajja, fascia , circular column / structure, etc or any other similar description of works etc including mechanical / manual mixing , wastage, compaction, curing also making contraction joints/grooves, if required with all labour, material, T&P etc all complete as per direction of EIC.

Providing & laying cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregat 20 mm nominal size of Bahratcoop/Dala/Jhansi) in floor, approach roads, or any description of works etc including mechanical / manual mixing , wastage, compaction, curing also making contraction joints/grooves, if required with all labour, material, T&P etc all complete as per direction of EIC

Providing, laying and fixing pre- cast drain/ trench covers in reinforced cement concrete 1:1.5:3 (1cement, 1.5 coarse sand, 3 - 20 mm size graded stone aggregate of Bharatcoop, Dala, Jhansi) including necessary shuttering, sides and all edges finished and set at position with cement mortar 1:3 (1cemennt, 3 coarse sand) , suitable arrangement for lifting and placing at site, including labour, material, T&P etc. all complete as per direction of E.I.C.

Providing and laying Deformed or twisted steel reinforcement ISI mark TMT Bars of make RINL/SAIL/TISCON or equivalent as approved by EIC, of any dia as per IS 1786 ( latest version) for all type of R.C.C works, straighting, cut to length, bend to shape required, including cranking, bending spirally or hooping providing spacers / chairs and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it, including cost of all labour, material, T&P, wastage etc. all complete at any height as per drawing, specification and direction of E.I.C.

Providing, fabricating, fixing and removing, Form work / shuttering of side of concrete, foundation, footings, base of coloum, slab, lintel, beams side etc. for all type of RCC work in required shape and size, with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden including all braces, struts, balli, etc, including working scaffoldings, ladders, wastage labour, material, T&P, transportation,etc. all complete as per specification and direction of E.I.C.

In sub-structure upto plinth beam e.g. column, footing, wall, plinth beam etc.

in Super-structure above plinth beam e.g. column, beam, cill, projection slab, slab, chhajja, fascia, fins, staircase etc or any description of works as per direction of EIC

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth etc all complete as requried and directed by EIC.

Providing and laying class 'A' old size brick (having crushing strength 75 Kg/cm²) work in cement mortar in CM 1:6 ( 1 cement : 6 coarse sand) in foundation and superstructure, walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per direction of EIC.

Providing and laying brick work half brick thick walls in cement mortar 1:4 ( 1 cement :4 Coarse sand) with bricks of sub Class ‘A’ with minimum average crushing strength 75 kg/ cm² using well burnt locally available bricks , laid straight or curved on plan not exceeding 6.0M. Mean radius including placing of reinforcement at every fourth layer etc. including cost of all labours, materials, scaffolding, curing, racking of the jointsT&P etc complete at all heights as per specification, drawing and as directed by Engineer in charge.( steel reinforcement will be paid separately under Steel reinforcement item)

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W./ PVC drain pipe 100 mm diameter, 1.8 m long complete as per standard design mentioned specification of CPWD tith common burnt clay F.P.S. (non modular) bricks of class designation 7.5 etc all complete as required and directed by EIC.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut, Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm or as per site requirement and directed by EIC, for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels etc all complete as requried and directed by EIC.

Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), size 300x600 or 300x450 or as per site requirement and approved by EIC, of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete etc all complete as requried and directed by EIC.

Providing and fixing 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, cutting wastage etc all com plete as reqruied and directed by EIC.

Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).

Providing and fixing M.S. grills of required pattern in frames of windows,Fixed to steel windows / ventilatros by welding etc. with M.S. flats, square or round bars etc. including suitable priming coat with approved steel primer all complete etc all complete as reqruied and directed by EIC.

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges size 100x75x3.50 mm with necessary screws etc. complete :etc. Complete all as required and directed by EIC.

Providing and fixing aluminium tower bolts, 300 x 10 mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as required and directed by EIC.

Providing and fixing aluminium 300 x 16 mm sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as required and directed by EIC.

Providing and fixing aluminium handles 125 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as required and directed by EIC.

Providing and fixing twin rubber stopper aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete all as required and directed by EIC.

Providing and fixing factory made P.V.C. door frame prelaminated of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.

Providing and fixing factory made panel30 mm thick pre laminated (both face) PVC door shutters consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.. at any height including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.

Engaging / Hire charges form Hydraulic Excavator (3D)/JCB with driver and fuel etc all complete as required and directed by EIC. The JCB shall be engaged after prior approval from EIC.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) etc.all complete as per specification and direction of EIC.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.).

Providing & fixing 4 mm thick glass panes with putty and glazing clips in steel doors, windows, clerestory windows, ventilators , etc all complete with etc all complete as required and directed by EIC.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts with Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides etc all complete as required and directed by EIC.

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 or overburnt brick on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks, etc all complete with etc all complete as required and directed by EIC.

Cement concrete pavement or similar description of any work with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing etc.all complete as per specification and direction of EIC.

Proviing and laying Dark shade pigment using ordinary pigmented cement Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including cutting, wastage, laid in requried gradient, etc all complete as requried and directed by EIC.

Providing and laying Ceramic glazed floor tiles (antiskid) of size 300x300 mm or 400 x 400 or 600 x 600 (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.all complete as per specification and direction of EIC.

Providing and laying Vitrified tiles in floor, double charged, polished finish size 600 x 600 or above in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily, inlcuding cutting, wastages .etc.all complete as per specification and direction of EIC.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall withaluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms etc complete all as requried and directed by EIC.

Providing and fixing on wall face unplasticised Rigid 110 mm dia PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes or as per site requirememt and directed by EIC

110 mm diameter

75mm diameter

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.or as per site requirememt and directed by EIC

Single Tee with Door of size 75 X 75 X 75

Single Tee with Door of size 110 X 110 X 110

75 mm dia Bend

110 mm dia Bend

110 mm dia shoe

Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls of rough / fair faces of brick wall / concerete surface including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per direction of EIC.

Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1:4 (1 cement: 4 coarse sand) on ceiling of rough / fair faces of brick / concerete surface including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per direction of EIC.

Providing, rendering, dubbing out cement plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished surface with neat coat of cement including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth with using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per direction of EIC.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, on New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : including surface preparation, making surface smooth and even and labour, material, scaffolding, T&P etc all complete as per direction of E.I.C.

Finishing walls with ready mixed Premium acrylic exterior emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives of approved make and colour pattern. - New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. etc all complete as per direction of E.I.C.

Providing and applying two coats of synthetic enamel paint on wall / wood/ steel surface of any description any girth at any height with first quality synthetic enamel paint of Asian / Shalimar / Berger of approved tint and shade over a coat of suitable primer for respective surface primer of above brand ,including preparing of surface by sand papering, removing oil/ smudge marks, filling, touching including labour material T&P, wastage etc all complete as per specification & direction of EIC.

Preparation of surface with applying average 1mm thick approximately birla putty before applying painting on wall including sand papering for smoothing of surface to achive even surface with all labour material T&P etc.all complete as per specification and direction of E.I.C.

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, aid in requried gradeints/ slope, camber, including use of concrete pump for laying concrete, floating vibrator for road surface, admixture, laoding, unlaoding and transporting concrete, mechanical mixing, wastage, compaction, side shuttering curing by ponding, cleaning the road after completion of all activities, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, to be paid separately and dowel bars with sleeve/ tie bars be paid separately under reinfrocement item in weight).

Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints approx 12.5 cm to 15 cm deep in roads / pavements, Using grade 'A' sealing compound conforming to IS: 1834. all complete as per direction of the Engineer-in-Charge. by EIC

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints approx 12.5 cm to 15 cm deep in roads / pavements, Using grade 'A' sealing compound conforming to IS: 1834. all complete as per direction of the Engineer-in-Charge. by EIC

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately

Lettering with black Japan paint of approved brand and manufacture or Writing letters or figures (Block,Roman,Italic or Indian) n exc. 30 cm high including base paint prepapration etc all material, labour, T&P, scaffolding etc. all complete as per specification and direction of E.I.C

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).

Providing and laying factory made chamfered edge Cement Concrete paver blocks, 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required etc all complete as required and directed by EIC.

Providing and fixing white vitreous china pedestal type water closet (European type), W.C. pan with ISI marked white solid plastic seat and lid with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :.including the cost of all approved materials,labour, wastages,testing, T&P at all heights etc.,complete all as per specification and as directed by Engineer In Charge.

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required : Single squatting plate with 5 litre P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-., in (a) White Vitreous China Wash basin size 550x400 mm oval or normal shape counter mointed as approved by EICwith a 15 mm CP Brass single hole basin mixer etc cluding the cost of all approved materials,labour, wastages,testing,T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers all complete with labour, material, T&P etc and as per direction of EIC.

Providing and fixing CP brass toilet paper holder including screws etc all complete as required and directed by EIC.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :.Range of two half stall urinals with 05 litre P.V.C. automatic flushing cistern etc all complete as required and directed by EIC.

Providing and fixing PTMT Bottle Trap for Wash basin and sink.:Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms etc all complete as required and directed by EIC.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms etc all complete as per direction of E.I.C.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.-450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms etc all complete as per direction of E.I.C.

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality,make and colour, weighing not less than 300 gms etc all complete as per direction of E.I.C.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,Concealed work, including cutting chases and making good the walls etc. having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

20 mm nominal dia Pipes

25 mm nominal dia Pipes

Providing and fixing C.P. brass, 15 mm dia C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. of approved make etc all complete as requried and directed by EIC

Providing and fixing in position 15 mm dia nominal bore CP brass bib cock of approved quality etc all complete as per direction of E.I.C.

Providing and fixing C.P. brass stop cock (concealed), 15 mm dia nominal bore of standard design and of approved make conforming to IS:8931. etc all complete as requried and directed by EIC

Providing and fixing in position gun metal gate valve of approved quality etc all complete as per direction of E.I.C.

25mm dia nominal bore

20mm dia nominal bore

Providing and fixing in position 15 mm dia nominal bore CP brass angle valve of approved quality for basin mixer and geyser points of approved quality conforming to IS:8931 etc all complete as required and directed by EIC.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush, 15 mm nominal bore with 45 cm length of approved quality and colour. etc all complete and as directed by EIC

Providing and fixing rectangular high density polyethylene 500 liter water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately etc all complete as per direction of E.I.C.

Providing and fixing in position PTMT circular type grating 100 mm nominal bore of approved quality and colour etc all complete as per direction of E.I.C.

Providing and fixing in position 20 mm nominal bore, 120 mm long, weighing not less than 198 gms, PTMT ball cock of approved quality , colour and make complete with epoxy coated aluminium rod with L.P./ H.P. H.D. plastic ball. Etc all complete and as directed by EIC

Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms etc all complete as per direction of E.I.C.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. etc all complete as per direction of E.I.C.

250 mm dia RCC Pipe

300 mm dia RCC Pipe

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:

Internal Electrification Make of Wire: Polycab/Finolex/L&T PVC Heavy duty Conduit: AKG/GM/CAP/Anchor Switch/socket Make: GM/Honeywell(MK)/Schneider Electric/Legrand (Blank plates shall be used as per site requirement)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit including all accessories such as bends, J.B,tees, ceiling rose, modular or angle holder (for light points),modular stepped type regulator etc. (for fan points) required for point wiring work with modular switch, modular plate with frame, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. The pipe shall be laid concealed in wall; partially it may be flush to the wall as per site requirement.

Add to the above Item-1 for each addition on only light points on the same switch circuit including all materials required for such wiring work.

Supply & making One (half point) with 5 pin, 6 Amps socket controlled by 6 Amps switch modular type on the same board with other switches with 1.5 sqmm, PVC. insulated,copper FRLS type conductor, multi stranded wire.

S & F of wiring for circuit/submains wiring alongwith earth wire with the following sizes of FRLS is PVC insulated copper conductor, single core cable in surface/ recessed as required. The pipe shall be laid concealed in wall; partially it may be flush to the wall as per site requirement. Make of Wire: Polycab/Finolex/L&T PVC Heavy duty Conduit: AKG/GM/CAP/Anchor

2 x 1.5 sq. mm (Red/Yellow/Blue) + 1x1.5 sq. mm earth wire (Green Color)

2 x 4.0 sq. mm (Red/Yellow/Blue) + 1x4 sq. mm earth wire (Green Color)

1 x 1.5 Sq mm Inverter wire (White Color)

Supply & making One independent domestic power point with 5 pin, 6/16A or 20A (for AC) modular socket controlled by 16/20 Amp or 25A (for AC) SP MCB modular type, with 4.0 sqmm P.V.C. insulated, copper FRLS conductor, multi stranded wire 1100/660 Volts grade in heavy duty P.V.C. pipe of including all accessories required for making power point/AC point such as modular cover plate with frame, P.V.C. pipe accessories, suitable size G.I. Box etc. The pipe shall be laid as per site requirement i.e. it may be concealed in floor/wall or flush to the wall. 2.5 sq.mm PVC insulated, single strand, copper FRLS wire shall be used in pipe with others wires for earthing of complete point wiring. Make: Havells/L&T/Crompton/Siemens

Supply & installation of LED Light Fitting, 4 feet x 34-38 watt twin T-8 LED tube complete fitting to be installed on ceiling or hanging from ceiling by m.s pipe/suspension wire or fixed on wall with all necessary fixing materials and arrangement. The work also includes connection from ceiling rose to fitting with twin core, white color flat flexible cable 1100/660 Volts grade. All material required for the work shall be supplied by the contractor. The work shall be done as per direction of engineer incharge. Make: Crompton/Philips/GM/Wipro/Osram

Supply and fixing 400 mm., RPM-1325,Sweep-400mm, metal blades and air delivery of 5500-6500 CMH wall fans of Crompton/Havells/Khaitan/Usha make. The work also includes connection from ceiling rose to fitting with twin core, white color flat wire of 1100/660 Volts grade. All material required for the work shall be supplied by the contractor. Make: Orient/Khaitan/Crompton/ Havells/Usha

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated premium decorative ceiling fan with BLDC motor , class of insulation: B, 3/4 nos. metallic finish blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote and electronic regulator unit for speed control suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Make: USHA/Atomberg/Orient/Luxaire/Havells/Crompton

Supply and installation of indoor type LED mirror with warm white color light with clamps and integrated LED as per following specifications:- Finish- Chrome Material- Chrome plated MS with PC diffuser Color rendering index- not more than 80 Lumen- 1000 Lm IP44, Warranty- 1 Year Premium reputed make Sample to be submitted for finalization

Supply & fixing of heavy duty fresh air fan size 12", 220V, 50hz make Havells/Khaitan/Crompton/Orient complete in all respect (blades, frame and louvers) as per direction of EIC. (Metal body) Make: USHA/Atomberg/Orient/Luxaire/Havells/Crompton

Supply & fixing of heavy duty fresh air fan size 12", 220V, 50hz, Copper winding make Havells/Khaitan/Crompton/Orient complete in all respect (blades, frame and louvers) as per direction of EIC. (Sturdy Plastic Body) Make: USHA/Atomberg/Orient/Luxaire/Havells/Crompton

Supply & Installation of new feeder pillar box outdoor type double door IP67 protected, vermin and weather proof made out of 14 SWG thick CRCA sheet including canopy type roof 15 cm extended in all side and two part hinged door in front side with knobs closing the front side door gasket arrangement and back side fixed with Nut, bolts and gasket, including provision of one set of aluminium busbar 125A rating for phase and 75 A for neutral fixed on DMC/SMC insulator with RYB Black colour code with heat shrinkable PVC sleeves and holes in bus bar strip and provision of suitable cable gland for cable entry including two coat of powder quoted paint complete and installation on PCC foundation with following: 1. Incoming:- Switch Fuse unit 125A rating with HRC fuses Make: L&T/Siemens/Schneider with 125A changeover switch 2. Outgoing: 06 nos. of 32A & 06 Nos. of 63 A busbar mounted bakelite fuse base per phase complete Make: L&T/Siemens/Schneider 4. Phase indicating lamps for RYB on Each incomming/outgoing 5. Digital Multifunction meter of L&T/Secure/Risabh make for measurement of Volatge/ampere/power factor/KVA/KWH/MD. Note: Drawing of feeder pillar shall be get approved before fabrication work and making of foundation for installation work is in the scope of supplier. Work is to be done as per the direction of Engineer- In-Charge.

Supply and fixing of TP&N distribution board with Double Door 6 way per phase (LDB),make: Legrand/Havells/Crompton/L&T with supply and fixing of following MCBs C-Curve and Isolator Legrand/Havells/L&T make, making connection and testing as per direction of EIC .

Supply and fixing of TP&N distribution board with Double Door 6 way per phase (PDB),make: Legrand/Havells/Crompton/L&T with supply and fixing of following MCBs C-Curve and Isolator Legrand/Havells/L&T make, making connection and testing as per direction of EIC .

Supply, laying(underground), connection and testing of under noted size of aluminium conductor, XLPE insulated, PVC sheathed, steel armoured 1100 volts grade power distribution cables conforming to IS7098 part I 1988, make Havells/Finolex/Polycab/Gloster by digging earth 85+/- 5cm depth, 25 cm width and supply & laying adequate sand and new class 'II' bricks for protection of cable, filling earth, leveling etc as per standard code of practice as per direction of EIC.

(i) 3.5 C X 70 sq.mm.

(iii) 4 C X 16 sq. mm.

Making End Termination of 1100 V grade XLPE insulated and PVC sheathed armoured Aluminium conductor cable of following sizes with Supply & Fixing of Lugs & Glands as per direction of EIC. (make: Raychem/3M)

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessirues and providign masonary enclosure with cover plate having locking arrangements and watering pipe of 2.7m. Long etc. (with charcoal/coke and salt as required)

Supply and laying of 6 SWG GI wire for earth connection to MCB DB. The work includes bending, cutting, connecting etc. as per site requirement. The wire shall be properly supported. Complete job. Work is to be done as per the direction of engineer in charge.

Supply and laying of GI strip 25*5mm for earth pit connection to pedestal DB. The work includes bending, cutting, connecting etc. as per site requirement. The wire shall be properly supported. Complete job. Work is to be done as per the direction of engineer in charge.

Supply, installation, testing and commissioning of RO based, UV lamp 80 Litres SS body, alkaline water purifier cum cooler with 2/3 faucets (at least 1 normal water and 1 cold water faucet) with sedimentation a filters, 4 stage purification, fully automatic with auto cut-off with environment friendly refrigerant, sediment and activated carbon filter as per following specifications:- Standard- IS14724 Storage tank material- SS304 Filtration water capacity- 120 litre/hour Cooling capacity- 60 litre/hour All civil work required is in the scope of Contractor. make: Eurekaforbes/Bluestar/Kent/Usha/Livpure

Supply and installation of 300 watt solar panel, single arm 15 Watt LED street light outdoor type, dusk to dawn security, waterproof, cool white color and luminuous flux more than 6000 lumens, pole height of 9 metres and complete civil work is in the scope of supplier (CE, ROHS compliant, IP65, MNRE approved),Warranty of battery-60 months and of panel 25 years Make: Crompton/Philips/GM/Wipro/Osram

Supply and installation of 150 watts *2 solar panel, double arm 180 degree each having 15 Watt LED street light outdoor type, dusk to dawn security, waterproof, cool white color and luminuous flux ore than 6000 lumens, pole height of 9 metres and complete civil work is in the scope of supplier (CE, ROHS compliant, IP65, MNRE approved), Warranty of battery-60 months and of panel 25 years Make: Crompton/Philips/GM/Wipro/Osram

Supply and fixing LED flood light 500 watt 230VAC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrossion resistant complete with driver and lamp with 12 metre steel pole with adequate strength against wind velocity 150 m/s and to be installed in ground after making proper concrete structure Make: Crompton/Philips/Bajaj/Havells

Above

HAL-AD/9904/4494/CE/2024

Civil, Electrical and allied works for Infrastructure development, Construction of Playground with Boundary wall, Security Guard Room, Toilet and related /associated projects at Satrikh Dehat Village, Harakh, Barabanki under HAL CSR- activity 2024-2025

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

PAN No.:

Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.

Goods and Service Tax ID No.

SAC (Service Accounting code) along with the tax structure.

Plant & Machinery details for the work.

Proposed work completion schedule in the form of bar-chart and monthwise billing plans.

List of supervisor/ technical staff with educational qualification

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

Registered Contractor

Tenderer or its associate should posses electrical license under class ‘A’ category for execution of electrical works. The bidder shall submit the valid document i.e. license copy issued from the competent authority/ agency along with the tender document. In case, if license is expired at the time of submission of document, the bidder shall give an undertaking that renewed license will be furnished before execution of electrical works. Further the bidder will be responsible for all the contractual obligations with HAL.

Registration Certificate under BOCW

Average annual financial turn over during the last 3 years, ending 31st March 2022 of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.197860.00

Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

Bid Capacity (i) The necessary documents to be submitted along with the technical bid (Technical bid ) Part-I in order to work out Bid Capacity as mentioned in Assessed available bid capacity as per NIT (ii) Assessed available bid capacity : The construction agencies who meet the minimum qualifying criteria shall be qualified only if their available bid capacity is more than the total estimated project/ package cost. The available bid capacity of a construction agency may be calculated as under :- Assessed available bid capacity = AXNX2-B, where N = Number of years prescribed for completion of subject project/ contract (indicate contract period N years) A = Maximum value of works executed in any one year during last five years at current price level, to work out value of work executed during previous years at current price level a weightage of 10% per year should be applied. B = Value at current price level of existing commitment and ongoing works to be completed in the next N years.

DECLARATION I

DECLARATION II

DECLARATION III

DECLARATION IV