PROVISION OF CERTAIN LBW, REV, MW AND SPECIAL REPAIR WORKS AT KOLHAPUR AND SATARA IN THE AREA OF AGE B/R (EAST) UNDER GE (NORTH) PUNE

Amount

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exc.1.5 m in depthfor foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in hard/ dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

M&L for moorum /red bajri filling in floors or pavings laid in layers n exc. 15 cm thick, spread ,levelled and rammed including watering complete all as specified and as directed.

Excavation in post holes ( or similar holes) each n.exc. 0.50 Cum, getting out, returning, filling in and ramming earth or borken rubble mixed with earth around, in layers n.exc. 25 cm thick in hard/ dense soil complete all as specified and as directed.

Surface dressing n exc 15 cm deep in soft/ loose soil complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Removing of excavated material (soil) to distance exceeding 250m and not exc.500metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Material and labour for hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C-1 (using 20 mm graded broken stone aggregate) as in filling in chowkats, bed blocks complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in foundations, filling as in post holes etc., complete all as specified and as directed.

Material and labour for precast solid cement concrete block masonry exc.10cm width using solid blocks of PCC design mix grade C5 set in cement mortar (1:6) complete all as specified and directed.

Material and labour for RCC (1:1½:3) type A-1(nominal mix ), (using 20mm graded broken stone aggregates) as in foundation, footing, plinth beams, bases of columns, bands etc complete all as specified and as directed.

Material and labour for RCC (1:1½:3) type A-1(nominal mix ), (using 20mm graded broken stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.

Material and labour for RCC (1:1½:3) type A-1(nominal mix ), (using 20mm graded broken stone aggregates) as in as in chajjas etc complete all as specified and as directed.

Material and labour for RCC (1:1½:3) type A-1(nominal mix ), (using 20mm graded broken stone aggregates) as as in columns, pillars, piers,posts and struts complete all as specified and as directed.

Material labour for RCC (1:1½:3) type A-1(nominal mix ), (using 20mm graded broken stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Material and labour for formwork to sides of concrete foundations, footings, bases of column, raft and raft beams, side and soffit (if any ) of foundation and plinth beam and similar works, vertical or batter etc for rough finished flat surfaces of concrete complete all as specified and directed.

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick for fair finished flat surfaces of concrete all as specified and as directed.

Material and labour for formwork to sides of pillars, posts, struts, columns and stanchions, square, rectungular or polygonal for fair finished flat surfaces of concrete complete all as specified and as directed.

Use &waste of formwork to sides and soffids of floor or roof beams, beam haunchings, grinders, bressumers, lintels cantilevers , shelves including supports , overhangs etc also splays between floors and beams etc.

Material and labour for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed .

Supply and fix for 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; for windows, ventilators etc. the size of the rail and stile as specified in SSR Par-I, Section 8, clause 8.24 (b) complete all as specified and as directed.

Supply and fix for 40mm thick 2nd class HW factory made plain frame, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces and the size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

Supply and fix for 150 mm long aluminium anodised, barrel tower bolts of extruded section, fixed with stainless steel screws (conforming to the sample kept in GE office) complete all as specified and as directed.

Supply and fix for 200 mm long aluminium anodised, barrel tower bolts of extruded section, fixed with stainless steel screws complete all as specified and as directed.

Supply and fix for 250mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

Supply and fix for 75mm size stainless steel butt hinges fixed with stainless steel screws complete all as specified and as directed.

Supply and fix for 125mm size aluminium handles, anodised, cast type complete all as specified and as directed.

Supply and fix for 150mm size extruded aluminium alloy handles fabricated type anodised fixed with stainless steel screws complete (conforming to the sample kept in GE office) all as specified and as directed.

Supply and fix for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with stainless steel wire staples complete all as specified and as directed

Supply and fix in repair for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with stainless steel wire staples, wooden beads complete all as specified and as directed

Taking out old rusted/ unserviceable mild steel work such as steel windows/ ventilators shutters with guard bar fly proofing shutter and other section etc. and removing same from work site including necessary cutting in brick walls complete all as directed.

Supply and fix for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 05cm and n exc 10cm long, diameter of neck 11 to 15mm complete all as specified and as directed

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed.

Supply and fix for rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, column posts, wind ties, fixed with angle cleats or other connecting plates, drilled for fixing all as specified and directed.

Material and labour for rolled mild steel Fe 410-W(Gde-E-250) quality-A in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

Supply and fix for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and as directed.

Supply and fix for pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed .

Supply and fix in repair for aluminium anodised powder coated louvered ventilator using Jindal or equivalent make aluminium section rectangular tube of size 63.5mm x 52mm x 1.5mm including glass 4mm thick ordinary quality frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc. complete all as specified and directed.

Supply and fix for aluminium anodised three track sliding window with two glazed shutters, one shutter with and including 4mm thick tinted glass of modiguard and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet tile profile of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Supply and fix for tiled false ceiling of size (600x600)mm in true horizontal level suspended on inter locking Gyproc Matrix metal grid of hot dipped galvanized steel sections. It consists of main "T" runner of size 24x38x0.3x 3600mm, cross "T" of size 24x25x0.3x 1200mm, secondary cross "T" of size 24x25x0.3x 600mm and PPGI wall angle of size 24x24x0.4x 3000mm. Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI. PPGI wall angle 24x24x0.4x 3000mm {Material-GI(IS513),YS-280Mpa,Finish-Galvanised 90GSM(IS277)} is fixed along the perimeter of the ceiling to Walls, partitions or columns etc., with wooden screws at 300mm centers or Hilti HPS 6 x40mm placed at 600 mm c/c. Gyproc ® soffit cleat 27x37x25x1.6mm {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM(IS277) } is fixed with Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1200mm x 1200mm grid. Main-T runners 24x38x0.3x3600mm are then suspended at 1200mm c/c from ceiling using 4mm zinc electroplated butterfly level clips of size 85x30x0.8mm spaced at maximum 1200mm center to center along main T and not more than 150mm from spliced joints.

The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall/ hung from ceiling using 2mm dia. G.I. suspension wires and 'J' bolts, washers, nuts spaced at 1200 mm both ways as per site requirement. 24x25x0.3x 1200mm cross T {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM (IS277) } is interlocked between the main T at 600mm center to center to form a grid of 1200x 600 mm and then secondary cross “T" 24x25x0.3x600mm {GI(IS513)YS-280Mpa,Finish-Galvanised 120GSM(IS277) } is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently. Finally 9.5mm thick square edge Gyproc Polyshield Gypsum tile of size 595x595mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges, so as to make the tile a completely sealed unit, is placed in the grid including making niches for fans/ light complete all as specified and as directed. Make: Gyproc-Saint Gobain of equivalent or Armstrong, Diaken, New Age (ACE) as approved by GE.

M & L machine cut polished cudappah stone slab 20-25mm thick as in lintels, shelves, partitions, cooking platform below granite stone and the like over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including making good disturbed surface complete all as specified and as directed.

Material and labour 75mm thick PCC (1:2:4) type B1 (using 20mm graded broken stone aggregate) as in sub base finishing the surface even and fair complete all as specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection, floor, hardstanding, courtyard, path laid in alternate bays not exc. 3.0m, finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour 100mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded broken stone aggregate) as in sub base floor finishing the surface even and fair complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of minimum size 300mm x 200mm x 7mm thick as in vertical surface such as dado/ skirting and of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sq.m but not exceeding 0.11sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11sq.m but not exceeding 0.18sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for machine pressed precast cement concrete coloured interlocking paver block, any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 grade with grey cement and pigments in floor/ pavement laid over and including 30mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for 5mm thick rendering in cement mortar (1:3) on fair faces of brick or concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces wall finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for preparation of newly plastered or unplastered surfaces of ceiling and applying two coats of white wash all as specified and as directed.

Material and labour for preparation of new plastered surfaces walls and applying two coats of dry distemper over chalk whiting complete all as specified and as directed.

Material and labour for complete removal of existing treatment on walls, preparation of surfaces and make the surfaces free from loose particles, oil stains etc., preparing surfaces and applying two coats of dry distemper over chalk whiting complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of acrylic distemper over a coat of primer complete all as specified and as directed

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed

Material and labour for complete removal of existing finish/treatment on wall surfaces, preparing surface and make surface free from loose particles, oil stains etc and applying two coats of cement base paint complete all as specified and as directed

Material and labour for hacking out old broken glass (any thickness, size, and quality of description) from metal frame including punching or drilling out old glazing pins, spring clips and providing and fixing new ones complete all as specified and as directed.

Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed.

Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Supply and fix for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down steel tubing with all fittings and connections complete all as specified and as directed.

Supply and fix 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including taking up or down steel tubing with all fittings and connections complete all as specified and as directed.

Supply and fix for vitreous china wash hand basin, white, size 550 mm x 400 mm flat back excluding taps but including CI brackets, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.

Supply and fix in repairs for vitreous china, squatting pan, 'Orissa' pattern, size 580 mm x 440 mm, white, with PVC 'P' of 'S' trap, front or back inlet and foot rests any pattern, including making good to floor and PVC high level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets including 32mm dia PVC flush pipe and all necessary fittings, connections for inlet, outlet, anti-syphonage pipes, etc. complete all as specified and as directed.

Dismantling water tanks, supply and fix for 500 litres capacity, rotational moulded polythelene water storage tanks (three layer) (ISI marked) (cylindrical vertical with closed top), hoisted and fixed in postion complete all as specified and as directed.

Supply and fix bib tap for 15mm bore pipe, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix stop valves for 15mm bore pipe, with wall flange, fancy type, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210gms) complete all as specified and as drected.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern) white with P or S trap including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, necessary inlet and outlet connections including PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC jet, PVC connection 450/600mm long with PTMT nuts and PVC flush pipe 32mm dia including making good complete all as specified and as directed.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Supply and fix in repair vitreous China bowl urinal flat back, size of 465 x 355 x 265mm, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste and including 32mm dia PVC flush pipe & discharge pipe, grating and union for discharge pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) floor trap 75 mm dia of outlet, plain with CP grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

Supply and fix in repairs grating doom75mm dia stainless steel with/without hole complete all as specified and as directed.

Supply and fix for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

Supply and fix for PVC (SWR) bends any radius of 75mm bore with access door complete all as specified and as directed.

Supply and fix in repair fore PVC (SWR) junction ( single 'T') equal or unequal for 110mm bore with access door complete all as specified and as directed.

S&F in repair 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.

S&F in repair 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.

S&F in repair 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls.

Dismantling of stone slabs and chequered tiles of any description or thickness in floor, apron etc., laid bedded and pointed in any mortar complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as directed.

Dismantling wrought iron or mild steel work of grill, guard bars or any description not otherwise provided for complete all as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness sheets including Nainital or similar pattern roof coverings complete all as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as directed.

Dismantling of wall/ceiling board/POP ceiling of any description and any thickness including cover fillets/ grid etc complete all as directed.

Supply and planting of tree Ashoka of height 2 feet to 4 feet including excavation of pit of size 2 feet x 2 feet x 2 feet depth for plantation, application of anti terminte treatment to trees and into pit.Putting DAP and Uria - suitable for plant and trees.Mixture suitable for plant in ratio 50:25:25 (Black Cotton Soil,red soil,Composed),Water saving circle made from black cotton soil weeding and hoiesting suitable for plants as per seasonal requirment of trees etc complete all as specified and as directed.

Supply and planting of tree Palm of height 2 feet to 4 feet including excavation of pit of size 2 feet x 2 feet x 2 feet depth for plantation, application of anti terminte treatment to trees and into pit.Putting DAP and Uria - suitable for plant and trees.Mixture suitable for plant in ratio 50:25:25 (Black Cotton Soil,red soil,Composed),Water saving circle made from black cotton soil weeding and hoiesting suitable for plants as per seasonal requirment of trees etc complete all as specified and as directed.

Supply and fix Steel Tree Guard of size 600mm dia and height 1200mm and each tree guard weight not less than 10 kg complete all as specified and as directed.

Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit/casing caping including removal of batten/ conduit/ casing caping/ gutties/ wooden boards/ switches/ sockets/ regulators/ holders/ ceiling roses/ call bells/ light fittings etc. for taking credit and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed. Note: Taking down of seviceable fittings and fixtures shall be measured and paid separatey.

Taking down the existing unserviceable main switch/ cut out/ MCB DBs/ sheet metal enclosure of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the unserviceable submain wiring of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLSH copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, 20 mm dia rigid PVC conduit of white/ ivory/black colour including all accessories concealed in wall/ ceiling/ chanel etc, with GI terminal sunken boxes 1.2mm thick 60mm deep of suitable size as per site requirement, covered with modular white cover plate with frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLSH copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.113 here-in-before but point wiring for one exhaust fan/ wall fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.113 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on same board.

All as per serial item No.113 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.113 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, PVC casing caping including all accessories fixed to walls/ ceilings etc., with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc. for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.118 here-in-before but point wiring for one ceiling fan/ exhaust fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.118 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.118 here-in-before but point wiring for one 3 pin 5/6 Amprs socket outlet controlled by one switch on same board.

All as per serial item No.118 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

Supply and fix for modular switch, one way 5/6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch, one way, 15/16 Amprs, 1 module with neon indicator complete all as specified and as directed.

Supply and fix for modular socket outlet multi purpose 2 & 3 pin 5/6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular socket outlet multipurpose, 3 pin 5/6 Amps and 3 pin 15/16 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for sheet metal enclosures single pole and neutral with a two pin and earth plug top and socket complete with one MCB DP 20 Amp complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. Make: L&T Cat No. DBSPN012DD or equivalent of Legrand, ABB

Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 40 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body complete all as specified and as directed.

Supply and fix for stepped type electronic fan regulator flush type suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Supply and fix for wall mounted LED 22watts with lumens out put not less than 2200 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired all as per Cat No. BCLAB SP 22L LED CW PC SD of make Bajaj or equvalent of make Philips/ Havells/ Syska/ Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20watts complete all as specified and as directed.

Supply and fix for recessed mounted low depth LED luminaire 2'x2' square LED panel 36 watts 596x596x9mm size sleek design aluminium housing, polycarbonate diffuser white powder coated finish operating voltage 140-270 volts, AC, 50 Hz all as per Cat No.BZRSQL 36W GZ1 NW of make Bajaj or equivalent of make Philips/ Wipro/Jaquar/ Crompton as approved complete all as specified and as directed.

Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 18 watt with high power LEDs as light source and electronic driver with lumens out put not less than 1800 lumens, with prewired all as per Cat No. ENXTP 18L WH CR PC SD of make Bajaj or equvalent of make Philips/ Wipro/ Havells/ Crompton as approved, necessary mounting arrangements and provision of 2.5 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 40mm dia 1.5 metres long GI pipe medium grade bracket of suitable shape with clamps made out of MS flat iron of size 40mm x 6mm, nuts, bolts including taking down old existing unsesrviceable tube light fitting complete all as specified and as directed.

Taking down ceiling fan of any sweep, keeping with safe custody and deposit to EM store yard of AGE EM North including transportation and loading and unloading fan complete all as specified and as directed.

S&F ceiling fan (after assembling the same) with fan hook/box, 1200mm sweep BEE 5 star rated, 3 blade ISI marked, white colour, 240 volt AC 50 HZ single phase with hanging rod, conopy set, clamps, bolts nuts and connecting with three core flexible PVC copper conductor cable of size 0.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells Cat No. ES-50 or Bajaj cat No. Kessals 50 ISI of equivalent of Usha, Orient Electric kiara shine, Crompton.

Supply and fixing of exhaust fan metal body of 230mm sweep, AC single phase, 240 V, heavy duty including metallic louvers and shutter and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan including making opening for fixing and making good as per existing as per site requirement complete all as specified and directed. Make: Havells Cat No. Ventil Air- DX White or equivalent of Crompton, Bajaj.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 15mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I including taking out existing earthing . (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 4.0 Sq. mm nominal area and drawing through and including non metallic rigid PVC casing capping and accessories including one run of single core PVC insulated 4.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm, one run of 4.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Note : 1. Performance security:- Refer Condition 22 of Special Conditions 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

m/s Pravin s Bhosale

shrilaxminarayan constructions