REPAIR /REPALCEMENT TO UG CABLES, MAINT AND REPLACEMENT OF LT CABLE AND CONNECTED ITEMS OF DISTRIBUTION SYSTEM IN OTA NCC UNDER GE KAMPTEE.

Amount

Taking down the unserviceable LT Panel of any size complete with all accessories all as specified and as directed.

Excavation in trenches in any type of soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of Cables,poles, stay and getting out of excavated material all as specified and as directed.

Excavation in trenches in hard/dense soil/hard standing not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of Cables,poles, stay and getting out of excavated material all as specified and as directed.

Supply and fix in repair Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 50mm outer diameter and 38 mm inner Diameter with IS 14930 (part 2):2001 laid in trenches,wall,floor,pole including bends, sockets and other connected accessories complete all as specified and directed Make:- Dura. Line/Tijaria/REX/Ketron

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 63 mm outer diameter and 51 mm inner Diameter with IS 14930 (part 2):2001 laid in trenches,wall,floor,pole including bends, sockets and other connected accessories complete all as specified and directed

Supply and fix Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 120 mm outer diameter and 103 mm inner Diameter with IS 14930 (part 2):2001 laid in trenches,wall,floor,pole including bends, sockets and other connected accessories complete all as specified and directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested all as specified and as directed.

Removal of surplus soil to a distance not exc. 50m and deposited where directed at a level not exc. 1.5 m above the starting point all as specified and as directed.

Supply and fix cable jointing kit straight through suitable for XLPE, 1100 volt underground cable, straight through heat shrinkable of size 95-120 sqmm 3.5 core cable size complete all as specified and as directed. Make:- Birla/Denson/Mahindra Note :- Any Excavation and earth work ,Returning and filling, Removing involved shall be measured and paid seperatelay

Supply and fix Heat shrinkable straight through cable jointing kit for 1100 Volts grade cable joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70-120 Sq mm all as specified and as directed. Note :- Any Excavation and earth work ,Returning and filling, Removing involved shall be measured and paid seperatelay

All as per item No.10 but cable size16 - 50 sq mm cable size all as specified and as directed. Note :- Any Excavation and earth work ,Returning and filling, Removing involved shall be measured and paid seperatelay

Taking down unserviceable underground cable, any size from trenches, wall, floor etc and removing from site all as specified and as directed.

Supply and Laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened,PVC bedded, galvanised steel strip or wire armoured, electric power cables ( heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 240 sq mm, 3.5 core including testing after laid and jointed with lugs,nuts,bolts,washers complete all as specified and as directed .

All as item No. 13 above but size 185 sq mm 3.5 core complete all as specified and as directed.

All as item No. 13 above but size 150 sq mm 3.5 core complete all as specified and as directed.

All as item No. 13 above but size 50 sq mm 3.5 core complete all as specified and as directed.

All as item No. 13 above but size 35 sq mm 3.5 core complete all as specified and as directed.

All as item No. 13 above but size 16 sq mm 4 core complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth strip 32 x 6 mm by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 15mm bore, light grade 7.5m long as applicable and as per plate No. 3 of SSR 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f) 40mm nominal bore medium grade GI protection pipe 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

M & L for galvanised iron strip 32x6mm for earth continuity lead fixed to pole or walls or both as or buried in ground or drawn through pipe or etc. as required for earthing complete all as specified and directed.

Supply, erecting & fixing steel tubular swaged pole complete with base plate, pole cap, nut bolt washer etc 11 meters long type 410 SP-55 swaged poles conforming to IS 2713 (Part-I to III) 1980 all as specified including two coats of black bitumen paint through out internally and externally upto planting depth and applying two coats of aluminum paint over one coat of red oxide primer (externally) and 30cm width of circular bands 3 Nos with blue paint starting from plinth level with a gap of 30 cm in between 2 bands and Numbering of poles as directed including excavation /earth work, PCC 1:4:8 type D-2 using 40mm aggregate for pole foundations of size 600x600x1500mm height upto ground level and using PCC 1:2:4 B-1 for coping with size 450x450x300mm including necessary formwork complete with taking down old unserviceable pole all as specified and as directed.

Fabrication, Supplying Installing, testing & Commissioning outdoor type feeder pillar box with rain cowl weather / vermin proof, Indoor type, factory made LT panel, from any CPRI approved manufacturer having dismensions of Suitable size with sufficient space between MCCB cable coonection place and body of panel for easily working to workers including necessary incoming & outgoing cable connections, cable glands thimbles of required sizes, made out of CRCA sheet 3.00 mm thick for outer shell and 2mm thick for inner shell duly powder coated paint with inner shutter & outer double door, the cubical shall have a bottom channel of size 75x40x5mm duly coated with zinc metal coating with satinless steel locking handle arrangement both side openable fixed on 50 x 50 x 5 mm MS angle frame fixed 300mm above groud level & 300 mm below the ground grouted in & including PCC 1:3:6 type C1 (using 20mm graded stone aggregate) complete all as specified, directed & comprising of following including refixing existing cables to new panels by proper lugging & cable gland as required. (a) Busbar chamebr for 3 phase & nuetral of capacity 800- Amps (50mm x 10mm) alumunium bus bar duly insulated, (b) Multifunctioning meter to measure Voltage, ampere, KWH, PF -1 Nos (c) One set of pilot lamp. (d) Incoming MCCB 630 Amps 4 Pole 415 volts 50 KA thermal magnetic setting type- 1 Nos (d) Outgoing MCCB 200 amps 3 Pole 415 volts 25 KA thermal magnetic setting type- 2 Nos (e) Outgoing MCCB 160 amps 3 Pole 415 volts 25 KA thermal magnetic setting type- 2 Nos (f) Outgoing MCCB 63 amps 3 Pole 415 volts 16 KA thermal magnetic setting type- 3 Nos

Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m complete all as specified and directed.

Dismantling insulators any type, any size complete all as specified and directed.

Dismantling stay assembly complete all as specified and directed. (demolition of concrete, etc. and excavation measured separatel

Dismantling of ACSR or AAC conductors complete all as specified and directed.

S&F in repair MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA,Ics=100% of Icu complete all as specified and directed.

S&F in repair MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA ,Ics=100% of Icu complete all as specified and directed.

S&F in repair MCCB 4 Pole, 415 V, Adjustable type, 320 Amps with breaking capacity 50 KA, Ics=100% of Icu complete all as specified and directed.

M&L for PCC Type D2 ,1:4:8 with 40 mm aggregate in lintels upto 1.5m clear span, cills, steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, complete all as specified and directed.

M&L for PCC Type B1 1:2:4 witjh 20 mm aggregate in lintels upto 1.5m clear span, cills, steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, complete all as specified and directed.

M&L Rendering 10 mm thick plaster on fair faces of brickwork or concrete sur faces in CM 1:4 all as finishing the surface complete all as specified and directed.

M&L Mild steel fabrication works such as angle / FI clamp, Ms pipe nuts, bolts, washers welding, bending cold or hot drilling holes for bolts in any shape and size etc including two coats of synthetic enamel paint cover a coat of red oxide primer complete all as specified and directed.

Cleaning of sub station area by uprooting all types vegitation,shrubs,weeds,saplings and creepers of unwanted trees complete with the help of spade,axes,crowbars and other mechanical means after taking necessary electrical shutdown from concerned incharge of various sub stns of Military stn Kamptee complete all as specified and directed.

Trimming of tree branches touching of Over head Elecctrical Lines upto 2.5 mtr distance from conductors after taking necessary shutdown from concerned incharge complete all as specified and directed. (Note : Space beteen poles will be measured as one unit irrespective of nos of conductors).

M&L for Loose filling with aggregates of gauge 40 to 80 mm crushed stone back colour suitable for spreading in electrical sub stn after preparation site by removing all type of debris, removing unwanted soil, and spreading lime powdwer beneath the aggregate complete all as specified and directed.

Supply and fix bracket for street light fittings made out of 40 mm dia GI pipe of light grade 1.5 m long each bent to shape & size required & fixed to pole with and including flat iron clamps 02 Nos made out of 30 x 5 mm flat iron including GI Nuts, bolts and washers and painting of clamps and street light brackets with two coat of aluminium paint over a coat of red oxide primer and fittings bracket to street light fitting including taking down old unserviceable bracket of any shape and size complete all as specified and directed.

M&L for preparing surfaces of electric poles of any type of following sizes including MS cross arms, MS clamps, street light brackets, bracket clamps, cable protection pipe stay etc of any sizes and shape & dusting, cleaning the surface complete and applying one coat of primer and two coat of aluminium paint completely, alternate layer of yellow and black paint of 150 mm strip at the bottom of pole 1.5 mtr above coping with synthetic enamel paint Height of HT rail/ tubular poles exceeding 7.5 Mtrs upto 9.5 Mtrs above ground leval. complete all as specified and directed.

All as per item No. 39 abve but Height of steel tubular poles 7.5 Mtrs above ground level complete all as specified and directed.

M&L for preparing surfaces of electric poles of RCC type of any sizes including MS cross arms, MS clamps, street light brackets, bracket clamps, cable protection pipe stay etc of any sizes and shape & dusting, cleaning the surface complete and applying one coat of primer and two coat of weather proof paint completely and alternate layer of yellow and black synthetic enamelled paint of 150 mm strips at the bottom of pole 1.5 mtr above coping complete all as specified and directed.

M&L for preparing surfaces of electric TWO pole Structures of any make and height of pole up to 10 Mtrs above ground level including MS cross arms, AB Switch pipe, DO Fuse assembly,MS clamps, brackets, bracket clamps, cable protection pipe stay etc of any sizes and shape & dusting, cleaning the surface complete and applying one coat of aluminium paint complete all as specified and directed.

M&L for preparing surfaces of electric Four pole Structures of any make and height of pole up to 10 Mtrs above ground level including MS cross arms, AB Switch pipe, DO Fuse assembly,MS clamps, brackets, bracket clamps, cable protection pipe stay etc of any sizes and shape & dusting, cleaning the surface complete and applying one coat of aluminium paint complete all as specified and directed.

M&L for writing pole No. with letters of size 25 mm height on pole/ plate with Black synthetic enamelled paint complete all as specified and directed.

S&F in repair Bus bar chamber Four pole 100 amps 415 volts 4 way with all incoming and outgoing connection with cable lugs,washers,nutbolts and accessories complete with taking down old unserviceable changeover switch all as specified and as directed. Make:- C&S/Ship/Standard/ABB

S&F in repair Bus bar chamber Four pole 63 amps 415 volts 4 way with all incoming and outgoing connection with cable lugs,washers,nutbolts and accessories complete with taking down old unserviceable changeover switch all as specified and as directed. Make:- C&S/Ship/Standard/ABB /Havells

S&F in repair ON- LOAD change over switch Four pole 63 Amps 415 volts, with all incoming and outgoing connection with cable lugs,washers,nutbolts and accessories complete with taking down old unserviceable changeover switch all as specified and as directed. Make:-Make:- C&S/Ship/Standard

S&F in repair ON- LOAD change over switch Four pole 100 amps 415 volts with, all incoming and outgoing connection with cable lugs,washers,nutbolts and accessories complete with taking down old unserviceable changeover switch all as specified and as directed. Make:-Make:- C&S/Ship/Standard

Supply and fix in repairs thermoplastic cable entry junction boxes of size 250 x 220 x 135 mm and IP-65 protection level with metric knock out fixed on poles with MS clamps, nuts, bolts and washers including MCB SPN, 5-32 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc., separate (detachable) gland plate, bakelite connector 4 way 20 amp, dust and vermin proof, front door opening with hinges and locking arrangement, complete all as specified and as directed. Make:- Sintex/Hensel or equivalent

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 90,395.00]

Paragon Electrotechnics

Vaidehi E Link

Bidder Name

Paragon Electrotechnics

Chinmaya Enteprises

Vaidehi E Link