Annual work contract for Third party monitoring work of Air, Water, Noise pollution and collection and testing of used oil (Lubricating Oil, Transformer oil and Fire resistance fluid (FRF)) for 4x210 MW and 1x500 MW, at SGTPS MPPGCL Birsinghpur.

AIR POLLUTION

Determination of Mercury in the Stack emission of 1x500 MW,SGTPS,MPPGCL,Birsinghpur.

Determination of parameters of Ambient Air Quality at wind-ward direction (S.W.)(near CAAQMS-1) inside power house premises for following:-

Lead (Pb) in µg/M3

Ammonia (NH3) in µg/M3

Benzene (C6H6) in µg/M3

Benzo (a) Pyrene (BaP) (particulate phase only) in ng/M3

Arsenic (As) in ng/M3

Nickel (Ni) in ng/M3

Mercury (Hg) in ng/M3

Determination of parameters of Ambient Air Quality at Lee-ward direction (N.E.)(near CAAQMS-2 room) inside power house premises for following:-

Perticulate matter (size less than 10 µm) or PM10 in µg /M3

SO2 in µg /M3

NO2 in µg/M3

CO in mg/m3

Perticulate matter (size less than 2.5 µm) or PM2.5 in µg /M3

Ozone (O3) in µg/M3

Lead µg/M3

Ammonia (NH3) in µg/M3

Benzene (C6H6) in µg/M3

Benzo (a) Pyrene (Bap) (-particulate phase only) in ng/M3

Arsenic (As) in ng/M3

Nickel (Ni) in ng/M3

Mercury (Hg) in ng/M3

Determination of parameters of Ambient Air Quality in Colony/residantial area :-

CO in Mg/M3

Ozone (O3) in µg/M3

Lead (Pb) in µg/M3

Ammonia (NH3) in µg/M3

Benzene (C6H6) in µg/M3

Benzo (a) Pyrene (BaP) (particulate phase only) in ng/M3

Arsenic (As) in ng/M3

Nickel (Ni) in ng/M3

Mercury (Hg) in ng/M3

Determination of parameters of Ambient air quality in two directions :- 01. At wind-ward (SW) direction - (Changera village) 02. At Lee-ward (NE) direction - (Mundaria village) outside power house premises for following:-

Perticulate matter (size less than 10 µm) or PM10 in µg /M3

SO2 in µg /M3

NO2 in µg/M3

CO in mg/m3

Perticulate matter (size less than 2.5 µm) or PM2.5 in µg /M3

Ozone (O3) in µg/M3

Lead µg/M3

Ammonia (NH3) in µg/M3

Benzene (C6H6) in µg/M3

Benzo (a) Pyrene (Bap) (-particulate phase only) in ng/M3

Arsenic (As) in ng/M3

Nickel (Ni) in ng/M3

Mercury (Hg) in ng/M3

WATER POLLUTION

Collection and Testing of Ash Bund Effluent from Ash Dyke for following, as per latest edition of the Indian Standards (IS) Specifications or as per latest edition of APHA, New York U.S.A. if IS method is not specified :-

Oil & Grease (mg/l)

Colour (Hazen unit)

Total dissolved solid (mg/l)

COD (mg/l)

Toxicity (Toxicity Factor-TF)

Odour

Arsenic (As) (mg/l)

Mercury(Hg) (mg/l)

Chromium (mg/l)

Lead (mg/l)

Collection & Analysis of following water samples as per latest edition of the Indian Standards (IS) Specifications or as per latest edition of APHA, New York U.S.A. if IS method is not specified :--

Reservoir Water Sample before confluence point of plant discharge (01 no. sample)

Reservoir Water Sample at 100 mtr from confluence point of Once through condansor cooling system (01 no. sample)

Ground Water Samples at distance of 10 km from power house in four directions (04 nos. Sample) Total 06 Nos. Samples for following:-

pH/Temp.(0C)

Total suspended solids (mg/l)

Oil & Grease (mg/l)

TDS (mg/l)

BOD & COD (mg/l)

Turbidity (NTU)

Total Hardness (mg/l)

Copper (mg/L)

Iron (mg/l)

Chromium (mg/l)

Cyanide (mg/l)

Fluoride (mg/l)

Cadmium(mg/l)

Lead (mg/l)

Arsenic(mg/l)

Mercury (mg/l)

Titanium (mg/l)

Zinc (mg/l)

Dissolved Oxygen (mg/l)

Carbonates (mg/l)

Bicarbonates (mg/l)

Sulphates (mg/l)

Chlorides (mg/l)

Alkalinity (mg/l)

Sodium (mg/l)

Potassium (mg/l)

Collection & Analysis of treated Effluent of Effluent Treatment Plant (ETP), as per latest edition of the Indian Standards (IS) Specifications or as per latest edition of APHA, New York U.S.A. if IS method is not specified, for following :-

Oil & Grease (mg/l)

TDS (mg/l)

BOD3 days 27oC & COD (mg/l)

Dissolved Oxygen (mg/l)

Chlorides (mg/l)

Collection & Testing of 03 Nos. Peizometer well point Samples, as per latest edition of the Indian Standards (IS) Specifications or as per latest edition of APHA, New York U.S.A. if IS method is not specified, for following :-

pH/Temp. (0C)

Total suspended solids (mg/l)

Oil & Grease (mg/l)

TDS (mg/l)

BOD & COD (mg/l)

Turbidity (mg/l)

Total Hardness (mg/l)

Copper (mg/l)

Iron (mg/l)

Chromium (mg/l)

Cyanide (mg/l)

Fluoride (mg/l)

Cadmium (mg/l)

Lead (mg/l)

Arsenic (mg/l)

Mercury (mg/l)

Titanium (mg/l)

Zinc (mg/l)

Dissolved Oxygen (mg/l)

Carbonates (mg/l)

Bicarbonates (mg/l)

Sulphates (mg/l)

Chlorides (mg/l)

Alkalinity (mg/l)

Sodium (mg/l)

Potassium (mg/l)

Collection & Analysis of D.M. Plant Effluent, as per latest edition of the Indian Standards (IS) Specifications or as per latest edition of APHA, New York U.S.A. if IS method is not specified, for following :-

Temp.(0C)

Total suspended solids (mg/l)

Oil & Grease (mg/l)

TDS (mg/l)

Alkalinity (mg/l)

Copper (mg/l)

Iron (mg/l)

Collection & Analysis of Industrial Drain Samples - 05 Nos. Boiler Blow Down & 05 Nos. Condenser Cooling Discharge, as per latest edition of the Indian Standards (IS) Specifications or as per latest edition of APHA, New York U.S.A. if IS method is not specified, Total 10 nos. samples for following:-

pH/Temp.(0C)

Total suspended solids (mg/l)

Oil & Grease (mg/l)

TDS (mg/l)

Alkalinity (mg/l)

Copper (mg/l)

Iron (mg/l)

Collection & Testing of Domestic Water Sample before & after treatment including bactereological testing for E. Coli & Total coliform bacteria, as per latest edition of the Indian Standards (IS) Specifications or as per latest edition of APHA, New York U.S.A. if IS method is not specified. Total 02 Nos. samples.

NOISE POLLUTION

Noise Pollution Monitoring Inside & Outside the Power House at following locations as below:-

Near Turbine

Near Boiler

WT Plant

PF Mill Area

Crusher House

Coal Handling Plant

Ground floor near condenser

Office area in power house

Colony area

Hospital area

All four directions at 10 km redius around the power house

Collection and analysis of used oil (Lubricating oil, Transformer oil & fire resistance fluid (FRF) oil, as per schedule -V of Hazardous & other waste (Management & Trans-boundary Movement) Rule-2016 for the following parameters:-

Polychlorinated Biphenyl (PCBs)

Lead (PPM)

Arsenic (PPM)

Cadmium+chromium+Nickel (PPM)

Polyaromatic Hydrocarbons (PAH) %

VARDAN ENVIROLAB