SPECIAL REPAIR TO FENCING PATH AROUND FOOTBALL GROUND AND SURROUNDING AREA, PROVISION OF GRASS PAVER TILES NEAR SWIMMING POOL, PROVISION OF WALL TILING NEAR P-2 WITHIN NAVAL PREMISES AND PROVISION OF SHED AT CERTAIN LOCATIONS AT CHANAKYA BAGH, CHANAK

Amount

Demolition of brick work / stone masonry built in cement mortar or cement lime mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors pavings n exc 15 cm thickness below or above ground levels complete all as specified and directed.

M&L brick work with sub class ‘B’ brick (old size) straight or curved on plan exc 6m mean radis built in CM 1:4 complete all as specified and directed.

All as per item No 3 above but except bricks complete all as specified and directed.

M&L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in coping, band, bed plates and similar items including weathering slightly rounded or chamfered angles and througting, complete all as specified and directed.

M & L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on wall surfaces, finishing the surface even and smooth without using extra cement complete all as specified and directed.

Dismantlling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 to 8mm thick with matching highlighter over and including 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles (Design/colour of tiles will be approved by GE) complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M and L for 22-25 mm thick Red Agra sand stone as in wall cladding, steps, footpath gang saw machine cut edges , polished, over 20mm thick cement screed in CM 1:4,set and jointed in cement mortar 1:3 and pointed in cement mixed with approved pigment to match the colour of the stone ( Note:- Size and colour of stone to be matched with existing stone) complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and directed.

M&L for Surface dressing n exc 15 cm deep of soft/loose soil complete all as specified and directed.

M&L for Machine pressed precast concrete Grass paver block with any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

M & L for Sand for 50 mm thick filling under grass/ interlocking paver block including watering and consolidation complete all as specified and directed.

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed at a level n exc 1.5 m above starting point in soils complete all as specified and directed.

S&F in repair factory made precast Road kerb stone of size 300mm X 450mm and thickness 150mm at bottom and 100mm at top, PCC 1:2:4 type B-0 (12.5 mm graded stone aggregate) vibro mechanically pressed and floated, heavy duty set jointed and pointed in cement mortar 1:3 and removing rubbish outside MOD land complete all as specified and directed.

M&L for preparation of new or previously untreated concrete surfaces, of any description not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

Taking down cement plaster on brick wall surfaces including racking out joints hacking for key scrubbing down with water etc and removing the rubbish out of MoD Land complete all as specifeid and directed.

Surface excavation nexc 30cm and averaging 15cm deep in soft/loose soil complete all as specified and directed.

M&L for hard core of broken bricks n exe 63 mm, deposited, spread and levelled in layers n exe 15 CM thick, watered and rammed to a true surface complete all as specified and directed.

M & L for cement concrete type D2 1:4:8 (40mm graded aggregate) 75mm thick as in sub base complete all as specified and directed.

Excavating in post holes (orsimilar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft soil complete all as specified and directed.

M&L for Cement concrete in foundations,filling and mass concreteType D2 1:3:6 (40 mm graded coarse agg) complete all as specified and directed.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L for Steel work in tubular trusses, post round or rectangular pipes including special shaped washer etc complete using ERW or induction butt welded tubes confrming IS 1161-1979 grade St.-240, complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated/curved at one end steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Removing excavated meterial n exc 50 m and depositing where directed at a level n exc 1.5 m above starting point in soils complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block with ceramic/glossy finish any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified and directed.

M/S SONU ENTERPRISES

Shivam Firetech Engineers

BEHAL TRADERS

J S CONSTRUCTION CO

M/s Durga Traders

R S CONSTRUCTION CO.

friends associeates