Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.2 LAccepted-AOC VIKASH NAGAR ROAD NO 1 NEAR GAUSHALA RAMGARH CANTT JHARKHAND 829122 | RAMGARH CANTT | RAMGARH | JHARKHAND | 829122 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹27.5 L+₹1.1 L (4.27%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹28.3 L+₹1.9 L (7.05%)Rejected-Finance KRISHNA NAGAR BOOTY RANCHI 835217 | RANCHI | JHARKHAND | 835217 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹29.0 L+₹2.6 L (9.78%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹29.0 L+₹2.6 L (9.81%)Rejected-Finance GALI NO 4 GAUSHALA ROAD VIKASH NAGAR RAMGARH CANTT RAMGARH JHARKHAND 829122 | RAMGARH CANTT | RAMGARH | JHARKHAND | 829122 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹26.2 L
EMD Value
₹52,500
Closing Date
29 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dipatoli
GARRISON ENGINEER MILITARY ENGINEER SERVICES DIPATOLI CANTT P.O. HOTWAR RANCHI - 834012
SPL REPAIRS TO OTM ACCN BLDG NO P-394, P-396, P-397 AND P-400 OF FD WKSP COY AND SPL REPAIRS TO ROOF TOP SURFACE OF BLDG NO P-67 (COCKEREL LODGE) OF HQ INF BDE AT DIPATOLI POCKET OF RANCHI MIL STN
2022_MES_544037_1
8000/1821/E8
Open Tender
Civil Works
Item Rate
180 days
Dipatoli
Class D, Category
a(i)
8 documents required · 8 mandatory
₹500
Yes
GE Dipatoli
₹52,500
Yes
16 Sept 2022
9 Aug 2022
31 Aug 2022
9 Aug 2022
29 Aug 2022
23 Aug 2022
Amount
Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition of Brick/stone works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed.
M&L brick work using sub class B brick curved or straight on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.
S&F wire netting of galvanised steel wire 1.23 mm dia and size of mesh 25 on crack of corners/wall/ceiling as required and complete all as specified and directed.
M&L rendering on other than fair faces of brick work 15mm thick in CM (1:6) and to be finished smooth and even with out using extra cement for internal surface complete all as specified and directed
M&L for preparing newly plastered surfaces and applying two coats of distember oil emulsion white or tinted on walls and including average 3mm thick white wall care putty in two layer to achieve even and smooth surface complete all as specified and directed
Complete removal of old surfaces of wall and applying two coats of distember oil emulsion white or tinted on walls and including average 3mm thick white wall care putty in two layers to achieve even and smooth surface complete all as specified and directed
M&L for applying three coats of white wash on new surfaces of wall including preparation of newly plastered surfaces complete all as specified and directed.
M&L for applying two coats of white wash on old surfaces of wall in cluding preparation and complete all as specified and directed
M&L Rendering 5mm thick in CM (1:3) on ceilling, surfaces finished even and smooth without using extra cement complete all as specified and directed
M&L for applying two coats of white wash on old surfaces of ceiling including preparation of plastered/ unplastered surfaces and complete all as specified and directed.
M&L for applying three coats of white wash onnew surfaces of ceiling including preparation of plastered/ unplastered surfaces and complete all as specified and directed.
M&L rendering on other than fair faces of brick work 15mm thick in CM (1:4) and to be finished smooth and even with out using extra cement for external surface complete all as specified and directed
M&L for preparation of new plastered surfaces and applying two coats of cement base paint on wall of any height of bldgs complete all as specified and directed.
Complete removal of existing treatment and preparing the surface of walls of any height of bldgs and apply two coats of cement base paint over a coat alkali resistant primer and complete all as specified and directed
Complete removal of all existing roof treatment from RCC roof including old hussion felt and preparation of surface with bire brush and cleaning with water complete all as specified and directed.
Brushing net cement slury @ 3kg/sqm on roof slab.
M&L for preparation of concrete roof surfaces and applying 10mm thick plaster in CM (1:4) and finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for applying a coat of bitumen primer @ 0.3L/sqm on roof surfaces, complete all as specified and directed.
M&L for applying 3mm thick APP modified polymeric membrane over the bitumen coat surface weight not less than 3 kg/sqm and over lap 100mm and sealed by torch application as per manufacture insteructions complete all as specified and directed.
M&L for applying two coats aluminium paint over bituminous surface of membrane, complete all as specified and directed.
Taking down shutter exc 3 Sqm but not exc 15 Sqm each, complete all as specified and directed.
Taking down shutter exc 15 Sqm but not exc 25 Sqm each, complete all as specified and directed.
Taking down rolling shutter exc 3 Sqm but n.exc 15 Sqm Each including hood cover and re-fixing in same opening after greasing, fixing spring and ball bearing and smooth functioning of the shutter, complete all as specified and directed.
Taking down rolling shutter exc 15 Sqm but n.exc 25 Sqm Each including hood cover and re-fixing in same opening after greasing, fixing spring and ball bearing and smooth functioning of the shutter, complete all as specified and directed.
S&F 1.25mm thick Steel rolling shutters with out ball bearing as specified including top cover an?choring rod, hasp and staple and one shop coat of primer erected in position as indicated, push pull or manual type and complete all as specified and directed.
Ditto as per item No 26 above, but gear operated type with bevel gear box and crank handle, complete all as specified and directed.
Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and directed.
S&F Suitable spring for rolling shutter, complete all as specified and directed.
Ball bearing for rolling shutters, complete all as specified and directed.
Preparation of new steel surface of any description any applying two coats of synthetic enamel paint under one coat of red oxide, over 10 cm in width or girth, not otherwise described
M&L in applying two coats of synthetic enamel paints on old surfaces wooden over 10 cm width or girth including preparatinon of surfaces, complete all as specified and directed
Demolition of (reinforcement) concrete/cutting of RCC slabs as required, roofs, floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed
M&L PCC (1:2:4) type B1 20mm grade aggregate as in padding, hold fasts coping or similar work complete all as specified and directed
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness below or above the ground floor etc complete all as specified and directed
M&L for 75mm thick cement conctrete (1:2:4) type B-2 (using 40 mm graded stone aggregate) as in hard standing/floors finished even and smooth w/o using extra cement 100mm thick complete all as specified and directed.
Forming contraction (Dummy) joints 65mm deepx10mm wide, filled with sealing compound grade 'A' and complete all as specified and directed.
M&L Cement concrete in floors 40mm thick over sub base (1:2:4) type B1 using 20mm graded aggregate finished even and smooth without using extra cement complete all as specified and directed
S&F glass diving strips, 3mm thick 38mm wide and complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, complete all as specified and directed.
M&L Joint free Non-skid colour ceramic tiles 7 to 8mm thick square/rectangular area of each tile exc 0.11 sqm but n exc 0.18sqm in floor over and including 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed.
Ditto all as per Item No 41 above, but in skirting including 10mm thick screed bed in CM (1:4) complete all as specified and directed
M&L for repair and rendering 10mm thick in CM (1:3) on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete (1:2:4) Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs complete all as specified and directed
Supply only integral water proofing compound, complete all as specified and directed
Providing and applying two coats of Finazinc R which is a two component epoxy based, zinc rich anti corrosive protective coating for steel. The mixing ratio is comp. A and comp B is (94:6) (by wight), the product can be applied by brush. The 2nd coat may be applied within2 hours after application of the 1st coat. The density of the mix is 2.28 Kg/l at 270C as on celing/facia/chajja. Necessary scaffolding and protection complerte all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.
M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm, single core, multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn through PVC Casing caping 20/25 mm on wall/ceiling, including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/ steel terminal boxes, cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note : The rate quoted is deemed to be included for Phenolic sheet (Hylem) and steel terminal box, cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.
All as per Ser item No 47 here-in-before but one 3 Pin Socket out let 5 Amps on the same board.
All as per Ser item No 47 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board.
All as per Ser item No 47 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.
Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified and directed.
S&F Switch piano type, single pole, one way 15 Amps complete all as specified and directed.
S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed.
S&F Socket outlet 2-in-1, 3 pin 5 and 15 amps, flush type complete all as specified and directed.
S&F Ceiling rose 3 terminal PVC/polycarbonate complete all as specified and directed.
S&F electronic regulator step type 230 Volts single phase 120 watt complete all as specified and directed
M&L for lamp holder, PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed
S&F in replacement of LED tube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver, including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed
Taking up or down steel tubing and connection of 15 dia bore, complete all as specified and directed
Taking up or down steel tubing and connection of 20 dia bore, complete all as specified and directed
Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar (1:3) to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth, complete all as specified and directed
M&L 15mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed
Refixing old steel tubing and connections in new or old position 15mm dia, complete all as specified and directed
M&L 20mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed
Refixing old steel tubing and connections in new or old position 20mm dia, complete all as specified and directed
M&L framed work such as grills, grating doors or gates etc of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, frame work of water tanks and similar work confirming to Fe 290, complete all as specified and directed
S&F gate valve, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15/ 20mm bore, complete all as specified and directed
Dismantling existing water tanks 1000 ltr and removing to stores complete all as specified and directed
S&F in repair hoisting 3 layers PVC tank 1000 litres capacity including supply & Fix 20mm dia brass float valve assembly complete all as specified and directed
M&L disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, measured separately), complete all as specified and directed
M&L APP membrane 3mm thick min wt 3 kg/Sqm for water prooping of roof sealing with 100mm over lap, complete all as specified and directed
Ashis Enterprises
M/S OMANIA ENTERPRISES
Associated Engineers
M/s Ray construction
Delhi Enterprises
united builders
M/S.R.S.Chauhan and Sons
M/S RAMOTAR SAHU
m/s sheo kumar singh & sons
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .