Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.2 LAccepted-AOC AT NUAGARH PO BARKUL DISTT KHURDHA ODISHA 752030 | KHORDHA | ODISHA | 752030 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹22.5 L+₹1.0 L (4.82%)Rejected-Finance AT AMRITPUR PO NB CHILKA VIA BALUGAON DIST KHURDA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹22.6 L+₹1.1 L (5.21%)Rejected-Finance AT DUNGAMAL NH 5 POST NB CHILKA VIA BALUGAON DIST KHURDA ORISSA 752037 | KHORDHA | ODISHA | 752037 | L3 | Rejected-Finance Other than L1 |
Tender Value
Refer Docs
EMD Value
₹44,000
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Chilka
Garrison Engineer Chilka PO INS CHILKA DISTT KHORDHA ODISHA 752037
ADDITION/ALTERATION TO DINNING HALL OF 1200 MEN GALLEY AT INS CHILKA UNDER GE CHILKA
2022_MES_555651_1
GE/CHL/8832 OF 2022-23
Open Tender
Civil Works
Item Rate
182 days
Garrison Engineer Chilka
MES Enlisted Contractor of Class E category a i
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer Chilka
₹44,000
Yes
3 Dec 2022
3 Oct 2022
14 Nov 2022
3 Oct 2022
7 Nov 2022
25 Oct 2022
3 Oct 2022 - 10 Oct 2022
Amount
Demolition of brick work/stone masonry built in cement mortar and removal of rubbish from site to a distance not exceeding 50m complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Excavating in trenches not exceeding 1.50 M wide and not exceeding 1.50 M in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed.
M&L cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations,filling and mass concrete complete all as specified and as directed.
M&L reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns etc complete all as specified and directed.
M&L reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in slabs suspended on walls , beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and in shelves and the like complete all as specified and as directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft beams, sides and soffits ( if any) of foundation and plinth beams and similar works vertical or to batter of flat, rough finished surface of concrete complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick of flat, rough finished surface of concrete complete all as specified and as directed.
M&L Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.
M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar 1:6 complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.
Removing excavating surplus soil, exceeding 50 M but not exceeding 100 M and depositing where directed at a level not exceeding 1.50 M above the starting point complete all as specified and as directed.
M&L cement concrete1:2:4 type B-2 using 40mm graded stone aggregate as in walls or retaining walls,any thickness, size or shape including pilasters, buttresses columns, pillars,boundary pillars and posts including caps and bases complete all as specified and as directed.
Use and waste of formwork to sides of pillars , posts, struts, piers, columns and stanchions of square, rectangular or polygonal, rough finished surface of concrete complete all as specified and as directed.
M&L 100mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of flooring complete all as specified and as directed
M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as subbase of flooring complete all as specified and as directed.
M&L 25mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor complete all as specified and as directed.
M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles in vertical surface 350mmx250mm or 450mmx350mmx 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
M&L cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps,seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs etc including necessary use and waste of form work complete all as specified and as directed.
M&L 15 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:4, surface finished even and fair complete all as specified and as directed.
M&L 10 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:6, surface finished even and fair complete all as specified and as directed.
M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty including preperation of newly plastered surface of wall complete all as specified and as directed.
M&L for applying two coats of weather proof acrylic emulsion (Anti dust) paint exterior grade (100% acrylic) over a coat of primer on newly plastered surfaces of walls of any description over 10 cm width or girth etc complete all as specified and as directed.
M&L applying three coat of white wash on wall including preparation of newly plastered surfaces of wall complete all as specified and as directed.
M&L 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.
S&F Vitreous china wash hand basin, white, flat back of size 580mm X 450mm with brackets, complete including 15 mm bore chromium plated pillar tap complete all as specified and as directed.
S&F 15 mm dia angle valve, chromium plated fancy type, screwed down high pressure for iron pipe or for unions and fixed complete all as specified and directed. Make :- Parryware cat No G5307A1 or equivalent as approved.
S&F in repair PVC connections 15mm size with PTMT nuts and washers of length 600mm complete all as specified and as directed.
S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet, overflow and wash out connections complete all as specified and as directed.
S&F 25 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.
S&F 15 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.
S&F 25 mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
S&F mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc drilled for fixing of steel sheeting or other covering to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides and hanging also fastening and fixing conforming to Fe 410 -W (Gde- E- 250) A quality complete all as specified and as directed.
M&L for applying two coat of synthetic enamel paint of approved shade over one coat of red oxide primer including preparation of new steel surface of any description over 10 cm width or girth complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint of approved shade including preparation of old painted steel surface of any description over 10 cm width or girth complete all as specified and as directed.
M&L for broken stone hardcore of guage not exceeding 63 mm , deposited , spread, leveled in layers not exceeding 15cm thick watered and rammed to a true surface complete all as specified and as directed.
M&L 75 mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection,laid in alternate panel including necessary use and waste of form work as required, surface finished even and fair complete all as specified and as directed .
S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting gauge , thickness , including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F 2mm thickness fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type or J type cranked hook bolt and washer in roof, wall etc complete all as specified and directed.
S&F PVC soap tray fixed with screw complete all as specified and as directed. Make :- Prayag Cat No 195 or equivalent as approved.
S&F 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.
S&F 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.
S&F 102mm dia chromium plated grating round shaped doom type for floor trap complete all as specified and directed. Make :- Prayag Cat No FT03M or equivalent as approved
S&F Brass chromium plated tubular towel rail, 20mm dia , D type, 600mm long complete all as specified and directed.
Taking down carefully copper / aluminium point wiring(light,fan,socket or power) complete along with fittings such as switches, sockets, ceiling rose , lamp holder, tube light fittings and making good disturbed surfaces of walls or ceiling etc to match with the existing complete all as specified and as directed.
M&L for point wiring with 1.5 sqmm PVC FRLS insulated unsheathed multistranded copper cable with 1.5 sqmm PVC FRLS insulated multistranded copper cable as earth continuity drawn in including surface PVC conduit not less than 20mm dia with pressed mild steel concealed box made out of 1.6 mm thick sheet covered with 3mm thick laminated sheets for mounting for mounting switches/sockets etc and other accessories such as spacers, saddles, junction boxes for one light / fan point /5 amp socket controlled by one switch complete all as specified and as directed.
S&F switch piano, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.
S&F ceiling rose, surface bakelite 65mm x 30mm, three terminals over and including PVC box of size 3"x3" round type complete all as specified and as directed.
S&F five stepped type electronic fan regulator for ceiling fan of any sweep including necessary connection complete all as specified and as directed.
M&L sub main wiring with 2 runs of 4.0 sqmm PVC FRLS insulated unsheathed copper cable multistranded 1100 V drawn in and including surface PVC casing capping not less than 25 mm wide and one run of PVC FRLS insulated unsheathed 4.0 Sqmm copper cable as earth continuity conductor with all accessories complete all as specified and as directed. Note :- 2 runs of 4.0 Sqmm, 1 run of 4.0 Sqmm copper earth wire and 01 run of PVC casing capping shall be measured as one unit length.
S&F in replacement of 20 W tubelight fitting with lamp, Endura linear LED ,Wall mounted LED batten with polycarbonate housing & integrated driver for efficient heat dissipation having THD>20% with complete fitting complete all as specified and as directed. Make:- Havells Cat part No LUMILINEBS20W LED865SPCWH or Bajaj Cat part No. BCLSB 20 WH as approved.
S&F ceiling fan white/Ivory in colour of 1200 mm sweep BLDC with BEE 5 Star rating with all fittings including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose complete all as specified and as directed. Make :-Bajaj /Havells/Crompton Greaves /Khaitan/Almonard as approved.
S&F in replacement of LED street light 25W, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 and 32 mm dia galvanised iron pipe light grade bracket having 1.5 m length with suitable clamp with nuts and bolts for fixing complete all as specified and as directed . Make :- Bajaj Cat Part No.ENXT P 30L WH CR PC SD 25 W or Havells Cat Part No : VILUMINASL25WLED757SASYB as approved.
S&F of Factory made sheet metal enclosure for DBs single door SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.
S&F MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.
S&F MCB 40 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.
S&F 25 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc laid in trenches or fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.
S&F 20 mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 M deep below ground level ) with top edge of the plate not less than 1.5 M below normal ground level, connected to galvanised earth lead wire 4.0 mm dia upto 7.5 M in length from earth plate by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-2009, connected to earthing with DBs all as specified including excavation and earth work in any type of soil, PCC 1:3:6 type C-1 using 20mm graded stone aggregate in chamber and 40mm thick RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab, reinforced, with 8mm dia TMT bar at 150mm c/c both ways, 15mm dia GI pipe light grade for earth lead protection, 20mm dia GI medium grade pipe for watering , funnel etc complete all as specified and testing on completion.
Cutting and screwing existing steel tubing 20 mm bore for insertion of new tee of 20 mm dia for branch connection complete all as specified and directed.
PRADIPTA KUMAR PANI
HARI HARA NAYAK
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .