REPAIR/ MAINTENANCE OF DB, EARTHING, BLDG SECURITY LIGHTS AND COMPREHENSIVE MAINTENANCE OF INTERNAL ELECTRIFICATION FOR CENTRAL INSTITUTES AT ITARANA UNDER GE ALWAR

Amount

Taking down carefully copper/aluminium point wiring of any size (light, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulatos, sockets etc to be measured separately), and making good disturbed surfaces of walls, floors etc to match with existing surfaces.

M&L for concealed Point wiring with two single core PVC insulate, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floor including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws with washer for One Light point controlled by one, one way switch complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.

All as per ser item No 2.00 but for One 3 pin switch socket outlet, 5 Amp on the same board with other switches.

All as per ser item No 2.00 but One 3 pin 5 amps switch socket outlet point on independent board.

All as per ser item No 2.00 but One bell/buzzer point controlled by one bell push.

All as per ser item No 2.00 but Two way point controlled by two way switch.

All as per ser item No 2.00 but One ceiling/exhaust fan point controlled by one switch and regulator

All as per item Sl. No. 02 here in before but wiring with 4.0 sq.mm multistranded cable and earth wire with copper conductor of size 4.0 sqmm for 15 amps power/geyser point.

Material and labour for point wiring for One Light point controlled by one, one way switch controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC Casing & Capping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS, terminated in existing/New wooden terminal box for mounting fittings like switches, sockets, regulators etc with and including new 3 mm thick phenolic laminated sheet top cover, fixed on top of terminal box complete, all as specified & directed.

All as per ser item No 9.00 here in before but One ceiling/exhaust fan point controlled by one switch and regulator

All as per ser item No 9.00 here in before but One 3 pin switch socket outlet, 5 Amp on the same board with other switches.

All as per ser item No 9.00 here in before but One 3 pin 5 amps switch socket outlet point on independent board.

All as per ser item No 9.00 here in before but One bell/buzzer point controlled by one bell push.

All as per ser item No 9.00 here in before but Two way point controlled by two way switch.

All as per item Sl. No. 09.00 here in before but wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power point.

M&L for concealed Point wiring for One Light point controlled by one, one way switch with single core PVC insulated, unsheathed multistranded copper conductor cable of size 1.5 sq.mm (FRLS) drawn in existing conduit /Existing Casing Caping including PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with 3 mm thick bakelite plastic laminated sheet top cover with brass counter shunk screws with washerc complete all as specified. Note - quoted rate shall include making good to the disturbed surfaces including plastering and painting to match with the existing colour.

All as per ser item No 16.00 but for One ceiling/exhaust fan point controlled by one switch and regulator

All as per ser item No 16.00 but for One 3 pin switch socket outlet, 5 Amp on the same board with other switches.

All as per ser item No 16.00 but for One 3 pin 5 amps switch socket outlet point on independent board.

All as per ser item No 16.00 but for One bell/buzzer point controlled by one bell push.

All as per ser item No 16.00 but for Two way point controlled by two way switch.

All as per item Sl. No. 16.00 here in before but wiring with 4 sq.mm multistranded cable and earth wire with copper conductor of size 4 sq.mm for 15 amps power point.

S&F in repair Piano type switch single pole 1 way 5/6 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair Piano type switch single pole 2 way 15/16 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair Piano type switch single pole 1 way 15/16 amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair Ding Dong Bell along with bell push flush type 5 amps complete all as specified and directed by Engr-in-Charge.

S&F in repair socket two in one 6/5 Pin 5 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

S&F in repair socket two in one 6/5 Pin 15/16 Amps 230 volt AC supply complete all as specified and directed by Engr-in-Charge.

Supply and fixing Modular switch, one way 6 Amp, 1 module in repair following switches, piano type, 230/250 volts grade on top covers (catered in point wiring above).

All as per ser item No 29.00 but for Modular switch, two way 6 Amp, 1 module

All as per ser item No 29.00 but for Modular switch, one way 16 Amp, 1 module

All as per ser item No 29.00 but for Modular bell push 6 Amp, 1 module

Supply and fix Modular socket outlet 2 in 1, 3pin 5A, 2 module in repair socket out let multipurpose use, flush mounting type, 230/250 Volts grade on Top covers (catered in point wiring above).

All as per ser item No 33.00 but for Modular socket outlet 2in1, 3 pin 15 Amps flush type

S&F in repair PVC white cover plate with frame 2 Module etc complete all as specified & directed.

S&F in repair PVC white cover plate with frame 3 Module etc complete all as specified & directed.

S&F in repair PVC white cover plate with frame 4 Module etc complete all as specified & directed.

S&F in repair PVC white cover plate with frame 6 Module. etc complete all as specified & directed.

S&F in repair PVC white cover plate with frame 8 Module etc complete all as specified & directed.

S&F in repair modular metal flush box 2 Module etc complete all as specified & directed.

S&F in repair modular metal flush box 3 Module etc complete all as specified & directed.

S&F in repair modular metal flush box 4 Module etc complete all as specified & directed.

S&F in repair modular metal flush box 6 Module. etc complete all as specified & directed.

S&F in repair modular metal flush box 8 Module etc complete all as specified & directed.

Supply and fix in repair ceiling rose surface bakelite two to three terminals/plate, polycarbonate, isolated body.

Supply and fix in repair Switch socket combination 2 in 1, 5 A, 3 Pin flush type inc taking down old onecomplete all as specified and as directed.

Supply and fix in repair Switch socket combination 5A/16A, 5 in 1 inc taking down old one complete all as specified and as directed.

Supply and fix in repair Switch socket combination 2 in 1, 5 A, 3 Pin with Modular box, flush type inc taking down old onecomplete all as specified and as directed.

Supply and fix in repair Switch socket combination 5A/16A, 5 in 1 with Modular box type inc taking down old one complete all as specified and as directed.

Supply and fixing in repair PVC Blanking Plates one way with internal lock complete.

S & F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed by Engr in charge.

S & F in repair modular fan regulator, 120W-2 Module complete all as specified and directed by Engr in charge.

Supply and fixing in repair decorative ultra slim,elegant and sleek designed LED T5 batten lighting fixture with extruded aluminium housing with frosted diffuser environment friendly energy efficient sutiable for 20 watt LED tube light with 125 lumen per watt complete all as specified and directed .

Supply and fix in repair Lamp holder, PVC/Polycarbonate type complete with lamp LED 9 Watt for Batten fitting with back plate and all fittings complete all as specified and directed by Engr-In-Charge

Supply & fixing in repair indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1X9 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge.

Supply and fixing in repair LED light fitting as building security lights of 35 Watt Cap 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, with epoxy powder coated CRCA sheet steel grey tray, clear acrylic cover, incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer, with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-In-Charge

supply and fix in repair LED batten (1.2m) made of CRCA sheet housing with a PC glossy diffiuser duly prewired connection having nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 20 watt including driver .it has a rated system life time of 40000 burning hours at L70 and should have a temperature of 6500 k CRI>80, THD<10 and PF>0.95 complete all as specified and directed

Supply and fixing in repair LED 30 Watt ultra slim edge 2x2 feet lit panel in aluminium casing recess mounted square fixtures in white finish suitable for low ceiling height, 3 in 1 , 3K,4K,6K with & including LED prewired and connecting up dismantling of old unsv recessed mounted light.

S&F in repair LED type security-DRACO SERIES light luminaire 45 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed by Engr-In-Charge

S&F in repair 20 Watt motion sensor batten (aluminium housing) for corridors based on auto dimming/ brightness option by motion sensor via in buildt sensor for efficient use of energy.

S&F in repair inverter LED batten 20 Watt (PC body) with opal diffuser, IP-20 and inbuilt battery backup with powerful lithium battery. LED batten shall have atleast four hours backup with minimum two years warranty. The batten shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours.

S&F in repair 20 Watt emergency LED inverter bulb B-22 capacity with inbuilt powerful lithium battery backup of atleast 4 hours and having minimum two years warranty. The lighting shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours.

Supply & fix in repair surface mounted bulk head LED light fitting including 10 watt LED lamp B22 base complete with all accessories and connection complete all as specified and as directed.

Supply & fix in repair LED post top lanterns of 40 Watt rated power and rated CCT 3000k, IP65 aesthatically designed spun Al spigot for mounting LED Driver and spun aluminium canopy which is painted white inside. Epoxy powder coated matt black finish after phosphochromate treatment, weather proof construction having robust design delivers to meet the landscaping needs , Luminaire type,Opaline diffuser suitable to be fixed over galvanised pole of diameter upto 50mm complete all as specified and directed by Engr-In-Charge

Supply & fix in repair LED post top lanterns of 20 Watt rated power and rated CCT 3000K, IP65 aesthatically designed spun Al spigot for mounting LED Driver and spun aluminium canopy which is painted white inside. Epoxy powder coated matt black finish after phosphochromate treatment, weather proof construction having robust design delivers to meet the landscaping needs , Luminaire type,Opaline diffuser suitable to be fixed over galvanised pole of diameter upto 50mm,complete all as specified and directed by Engr-In-Charge

Supply and fix in repair to 170 Watt LED flood light with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr-in-Charge. Note : Rates for T&P along with suitable nos of tradesmen to fix flood lights at high mast/Bldg/other suitable location as decided by Engr-In-Charge shall be deemed to be included in the quited rates by the contractor.

Supply and fix in repair to 120 Watt LED flood light with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr-in-Charge. Note : Rates for T&P along with suitable nos of tradesmen to fix flood lights at high mast/Bldg/other suitable location as decided by Engr-In-Charge shall be deemed to be included in the quited rates by the contractor.

Supply and fix in repair 100 Watt SMD LED flood light with pressure die- cast aluminium housing, complete with all accessories, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purposelighting W Turo Floodlight luminaires with secondary optics made in pressure die cast housing and heat sink in aluminium extrusion and IP 66 Protection fixed in existing clamp and connecting with existing cable, including nuts, bolts and washer etc complete all as specified and directed by Engr-in-Charge

S&F sheet metal enclosure concealed in wall incl making good of disturbed surfaces double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar, 12 Way, 230 Volts and including taking down old U/S DB ,SPN,8 way complete all as specified & directed.

S&F sheet metal enclosure concealed in wall incl making good of disturbed surfaces double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar, 8 Way, 230 Volts and including taking down old U/S DB ,SPN,8 way complete all as specified & directed.

S&F sheet metal enclosure concealed in wall incl making good of disturbed surfaces double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,4 way, 240 Volts and including taking down old U/S DB ,SPN 4 way complete all as specified & directed.

S&F sheet metal enclosure in wall incl making good of disturbed surfaces single door type suitable for fixing MCB's, SPN without busbar 2 way, 230 Volts and including taking down old U/S DB ,SPN 2way complete all a specified & directed.

S&F sheet metal enclosure concealed in wall incl making good of disturbed surfaces double door type suitable for fixing MCB's, TPN 4 way, 415 Volts and including taking down old U/S DB ,TPN,4 way complete all as specified & directed.

S&F sheet metal enclosure concealed in wall incl making good of disturbed surfaces double door type suitable for fixing MCB's, TPN 8 way, 415 Volts and including taking down old U/S DB ,TPN,8 way complete all as specified & directed.

Supply and fix in repair Vertical TPN DB 4 way suitable for Double Pole outgoing MCB-40 Amp-04 Nos with incoming 100 Amps, 16 KA, MCCB 4 pole-01 Nos complete with 250 Amps rated Copper busbar flush mounting, double door, proction class IP-30, IK08 complete all as specified

Supply and fixing in repair 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB of size SP 6-32 Amp complete with connection testing and commissioning complete all as specified and directed by Engr-In-Charge

All as per ser item No 76.00 but for SPN 40-63 Amp

All as per ser item No 76.00 but for SPN 16-32 Amps

All as per ser item No 76.00 but for TPN 16-32 Amps

All as per ser item No 76.00 but for TPN 40-63 Amps

S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with 01 No. single pole MCB 20 Amps & including taking down old U/S enclosure complete all as specified & directed .

Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and supply and fix new MCCB 4Pole, 100 Amps, 16 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete.

Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and supply and fix new MCCB 4Pole, 160 Amps, 36 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts, bolts and washer etc complete.

Disconnecting the existing Unserviceable MCCB from the cable, taking out from the panel board and supply and fix new MCCB triple pole with neutral, 63 Amps, 16 KA breaking capacity suitable for 415 Volt, 50 Hz, 3 phase supply, fixed in existing panel and connecting with existing cable, including nuts bolts and washer etc complete.

Material & Labour for Sub Main Wiring in repair with two run single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 2.5 Sqmm copper green colour earth wire all as specified and directed by Engr-in-Charge. NOTE-two run of 4 sq.mm & One run of 2.5 sq.mm & One run of PVC conduit with accessories shall be measured as One length.

Material & Labour for Sub Main Wiring in repair with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engr-in-Charge. NOTE-two run of 6 sq.mm & One run of 6 sq.mm & One run of PVC conduit with accessories shall be measured as One length.

Supply and fix 2.5 Sqmm three core PVC insulated, unsheathed multistranded copper conductor cable 1100 volts grade complete all as specified and directed by Engr in Charge.

Supply and fix 1.5 Sqmm three core PVC insulated, unsheathed multistranded copper conductor cable 1100 volts grade complete all as specified and directed by Engr in Charge.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overll PVC sheathed weather proof service connections one twin core cable flat or circular of aluminium, conductors size 10 Sqmm, stranded conductors.

Supply and fix in replacement rigid non metallic PVC Conduit 20 mm dia exclusive of boxes, junction boxes, terminal but inclusive of all Tees, Bends, Elbows, reducers, bell mouth, tube ends and fixing accessories such as couplers, lock nuts, saddles pipe hooks etc complete all as specified and directed by Engr-In-Charge.

S&F street light bracket made to shape at required angle made out of 40 mm dia (light grade)/suitable size for fitting of security light GI tubing of length not less than 1.5m long suitable for fixing /holding street light fittings including mild steel flat iron 50 x 6 mm clamp 02 Nos with bolts, nuts and washer complete all as directed by Engr-in-Charge & taking out old U/S bracket.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.30mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.30mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized earth Strip 32x6 mm by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.

Supply and fixing in repair LT cable junction box, dust and water proof (IP65), out door type, made out of Polycarbonate with glass fiber re-inforced, size of box 200 x 160 x 98 mm with swinging cover and locking clamp, pole mounting, consisting 4 Nos mounted on SMC insulator links and provision of incoming/outgoing cables with gland, including in built 6Amp MCB, SP, 9/10KA one No complete all as specified and as directed by Engineer-in-charge. Note : Rate deemed to be inclusive of MS clamps and nut bolts for fixing the box along pole.

Supply and lay in repairs and testing of cable LT XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cable heavy duty with stranded aluminum conductor, 1100 Volts grade of size 35 Sqmm 3.5 Core, Note:-Excavation, earthwork, will be measured and paid separately under respective items of this Schedule.

All as per item ser No 95.00 but for 16 Sqmm 4 Core

All as per item ser No 95.00 but for 25 Sqmm 4 Core

Excavation in trenches not exc 1.5 m wide and n. exc 1.5 m deep in soft/loose soil for foundation/ cable etc n exc 10 Sqm on plan and n exc 1.5 Sqm in depth all as specified and directed by Engr-in-Charge

Returning, filling in including spreading levelling, watering and well ramming in layer n. exc 25 cm thick complete all as specified and directed

Removing surplus soil to a distance n. exc 50 m and depositing where directed at level n. exc 1.5 m above the starting point complete all as specified and directed

Supply and spreading, levelling river sand in trenches for cables cushioning on top and bottom of cable all as specifede and directed.

M&L brick protection with sub class'B' brick laid flat across the cable complete all as specified and directed.

M&L for boring under roads for crossing of UG Cables complete all as specifie and directed by Engr-In-Charge.

Supply and fix GI Pipe light grade of size 40 mm laid in trenches under road/fixed on wall/pole for cable protection complete all as specified and directed by Engr-In-Charge

Supply and fixing only Globe shaped for Existing garden light in frosted finish made up of Polycarbonate suitable for LED 9/10 watt all as specified and directed & taking out old U/S Globe.

M/s ASK Enterprises (BID ID -3341621)

M/s Yash Electrical and Maintenance (BID ID -3333524)

M/S GUPTA ENTERPRISES (BID ID -3339964)

PD GUPTA AND COMPANY (BID ID -3340943)

M/S GAURI CONSTRUCTION (BID ID -3333727)

Shiv Enterprises (BID ID -3330333)