Construction of Herbarium in the First floor of ETHNO Veterinary Herbal Product Research and Development Centre in Eastern Garden at Veterinary College and Research Institute, Orathanadu.

Amount

Civil Works

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.

Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers For super structure in First floor

For super structure in Second floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Cement Concrete 1:3:6 (One Cement, Three sand and Six broken stone jelly) using 20mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:11/2:3 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:3:6 (One Cement, Three Sand and Six hard broken stone jelly). Dummy columns should be at least 1 metre height)

Brick work in Cement Mortar 1:5 (One cement and Five sand /M sand) using Second class ground moulded chamber burnt bricks of size 9” x 4 ½” x 3” for the following including curing, etc., complete complying with standard specification For super structure in First floor

For superstructure in Second floor

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes 110mm Dia having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) (The basic cost of the tiles should not be less than Rs.80/- per sq.ft.)

Flooring with the Eurocon or equivalent tiles of size 300 x 300 x 20mm laid over cement mortar 1:3 (One cement and three sand / M Sand) 20mm thick and pointing the joints to full depth of slabs with cement mortar 1:3 (One cement and three sand) mixed with colour oxide including laying, finishing, polishing with machine polish, curing etc., complete complying with standard specification.

Supplying and fixing of M.S. grill of approved design for open courtyard, grill, grill work to doors and window openings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (Open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI / 1mm 125 GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (Black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connection mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing alround the frames. The window should be got approved from the Engineer,i/c., before use on work.

Supply and fixing country wood scantling (first quality wood) for door frames including labour charges for making, applying anti corrosive paint on the back sides of frame and fixing the frame in position, etc. complete complying with standard specification. (The wood have to be got approved by departmental Engineers before use on work).

Supplying and fixing flush door shutters of single leaf with skin type paneled door 32 mm thick made up of hard wood of approved quality including fixing necessary furniture fittings such as iron oxide MS hinges of 125mm x 30mm size 3 Nos., aluminium aldrop of size 250 x 16mm – 1 No. aluminium tower bolt of size 250 x 12mm – 1 No. Aluminium tower bolt of size 200x12mm – 1 No., D type aluminium handle of size 125mm – 2 Nos. Aluminium door stopper / magnet catch 3” depth – 1 No. respectively, etc. complete complying with standard specification.

Supplying and fixing of steel door with new one of MS doors with single / two leaves, door outer frame 40x40x6mm angle, shutter frame 35x35x6mm angle, MS sheet 20 gauge intermediate stiffner 'T' section 25x25x6mm, panel should be covered with 20 gauge MS sheet withnecessary tower bolt 30cm length, butt hinges, MS handle on bothsides iron hold fast including red oxide primer, conveyance and the rate is including necessary dismantling making holes inRCC columns beams masonry wherver necessaryusing power drill to the extent required and made good to the originalconditionafter fixing as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coats of interior emulsion paint over one coat of primer using best qualityand approved colour of paint, brushes, scaffolding charges etc. complete complying with standard specification. Paint, primer and colour have to be gotapproved by department Engineers.

Painting two coats of exterior emulsion paint over one coat of primer using best qualityand approved colour of paint, brushes, scaffolding charges etc. complete complying with standard specification. Paint, primer and colour have to be gotapproved by department Engineers (Apex or equivalent only)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supply and fixing of Stainless Steel Hand rails for stair case near wet riser using 50mm dia 304L Grade stainless steel pipe of 1.60mm thick will be provided with tubular supports made of 304L grade stainless steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick stainless steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges etc., complete complying with standard specifications.

Supply and fixing of granite sink size 2’-0” X 2’-0” X 1’-0” of good quality and with a pair of M.S. angle, brackets, 40mm PVC waste pipe with necessary coupling T.W. plugs, screws, washers, white lead, etc., including painting two coats including dismantling the masonry if necessary and recovering the same to the original condition as directed. (The granite sink to be used on work should be got approved by the Engineer,i/c., before use on work).

Supplying and fixing in position 15 mm dia C.P. long body tap (Heavy type) of approved make conforming to IS specification and quality including cost of shellac, thread, etc., complete, complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Departmental Officer before use on the works)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position of PVC Sintex water tank of 2000 Litres capacity approved quality and make including the cost of PVC adopter, lifting charges, conveyance, etc., complete.

Supplying laying and jointing CPVC pipes of approved quality and make of the following dia fixed on walls with necessary clamps ans screws including cutting threading and fixing required specials etc., complete complying with standard specifications. 40mm dia [ISI mark; Higher pressure rating ratio - 11]

32mm dia [ISI mark; Higher pressure rating ratio - 11]

25mm dia [ISI mark; Higher pressure rating ratio - 11]

20mm dia [ISI mark; Higher pressure rating ratio - 11]

Supplying and fixing in position the following CPVC Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I. Pipes jointing the G.I. Specials and painting two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer in case of pipe line above ground level and one coat of tarring in case of pipe below ground level etc. complete complying with standard specification. (The G.I. specials used on the work shall be got approved by the Departmental Officer before use on works.) 40mm Elbow with ISI mark

40mm Coupling with ISI mark

32mm Elbow with ISI mark

32mm dia Tee with ISI mark

32mm x 25mm Reducer with ISI mark

25mm x 20mm dia Reducer elbow with ISI mark

20mm dia Tee with ISI mark

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level . 40mm dia with ISI mark

75 mm dia with ISI mark

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. 40 mm dia with ISI mark Gate valve

32 mm dia with ISI mark Gate valve

Fabricating, supplying & fixing in position Structural glazing, Strip Windows to external faces of the building either straight or curved in plan consisting of panel work of verticals and horizontals made out of specially designed extruded colour anodised aluminium sections anchored to RCC/STEEL elements through hot dipped GI clamps. Single glazed panels of 6mm thick toughened heat strengthened 6mm SCG COOL-LITE Graphite good quality. spandrel in-fills of 6mm thick GREY toughened tinted glass. The single glazed glass panels shall then be securely bonded to frame work with structural sealant to ensure absolute water tightness, spandrel infill's with insulation backing (50mm thk semi rigid black faced mineral wool at density of 60kg/cum Galva bond backing) and a backing of 12mm thk gypsum board or equivalent fixed to frame work with suitable angles, brackets, fasteners, etc. as per the manufacturer's detail including approved structural sealants, EPDm gaskets, fixing and other accessories and all incidental work complete as per drawings etc. complete to the satisfaction of the Engineer, TANUVAS officials .Rate shall include the fire dampers in vapour cured GI sheet formed

Providing rain water harvesting pit by earth work excavation in circular shape of 90 cm dia at 100 cm depth. The pit is encased with well ring of 90 cm dia, 30 cm depth, 50 mm thick using RCC 1:2:4 using 20 mm metal for 4 nos. The entire depth of 120cm is filled with 25cm sand, 25cm gravel and 70cm 20mm HBG Jelly. The top of the pit is covered with slab using RCC slab 1:2:4 50mm thick perforated slab including cost and fabrication of Reinforcement grills, cost for ring and cover slab includes labour charges, cost of materials, moulding curing, finishing and fixing in position etc., complete complying with standard specification.

Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False ceiling upto a ceiling height of height 4.5m using perforated sheets (10mm thick) including two coats of putty and labour charges etc., complete complyng with standard specifications.

Supply and laying of loop pile high density carpet of approved made and colour in correct position and alignment over 12mm thick polyurethene foam of good quality etc., complete complying with standard specification.

Bidder Name

P.Haridass