PACK 10 Construction of Kitchen shed to PUP school in Murungai Village at Murungai Panchayat in Acharapakkam panchayat union in Chengalpattu District Under AGAMT II 2022-23

Amount

Construction of Kitchen shed to PUP school in Murungai Village at Murungai Panchayat in Acharapakkam panchayat union in Chengalpattu District Under AGAMT II 2022-23 Estimate Amount : Rs.5,86,000

Earth work excavation for foundation in all soils and sub-soils to full depth as may be directed except in In hard stiff clay, stiff blackcotton soil, hard red earth, shale murams, gravel stony earth and earth muds with 50%(fifty percent) fair size boulders and hard gravely soils(SS20B)

filling with Gravel in layers not more 15 cm thick well rammed watered and compacted complete complying to standard specification for Basement

Cement Concrete 1:4:8 (one cement , five sand, and Ten hard broken stone) Using 40 mm gauge Hand Broken Granite stone jelly for Foundation including watering whenever necessary and laid in layers not more than 15 cm thick.compacting etc., complete

Reinforced Cement Concrete 1:1.5:3 (one cement , two sand, and four hard broken stone) using 20 mm , gauge machine broken hard granite stones jelly for RCC items of works excluding cost of reinforcement and fabricating Charges and centering and shuttering charges complete complying with standard specification

Brick work in Cement Mortar 1:5 (One cement and five sand) using Country Bricks ground moulded of size 23 x11 x7cm. For the following including curing etc., complete complying with standard specification.

Supplying and erecting centering of sides and soffits including supports and strutting up to 3.29 m height for plane surfaces in all floors with all cross bracing using mild steel sheets of size 90 cm X 60 cm and 10 gauge stiffened welded with mild steel angels of size 25 mm X 25mm X 3 mm etc. complete complying with standard specification

Belove basement

Above basement

Supplying, fabricating and placing in position mild steel or ribbed tor steel and all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete complying with standard specification

Paving the floor with design Cement Based Hydraulicaly Pressed Anti Skid Tiles in all floors over a base layer of C.M. 1:3 mix, 20mm thick and pointed with white Cement mixed with colouring pigments at the rate of 0.3Kg/Sqm including finishing neatly and curing, etc., complete, complying with standard specifications and as directed by the departmental officers.

Plastering with CEMENT MORTAR 1:5 (one cement and five sand)12 mm. thick in all floor including curing etc.Complete complying with standard specification.

Finishing the exposed surface of RCC item in CM 1:3 to 10mm thick including all complete labour charges etc, complete

Weathering course over roof slab using 20mm brick jelly and lime concrete including all charges etc,complete.

Finishing the top of roof with one course of Pressed tiles of size 20 x 20 x 2 cm in C.M 1:3 and poilted with Cement Morter 1:3 mix including cost and conveyance and all other labour charges etc complete.

Painting two coats with ready mixed plastic emulsion paint of Ist class etc., with best approved best quality of synthetic emulsion paint of approved colour over the existing priming coat etc., complete

Painting two coats with ready mixed OBD paint of Ist class etc., with best approved best quality of Distemeper paint of approved colour over the existing priming coat etc., complete

Painting TWO coats of new iron works such as steel doors, windows,ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint

Fabrication and supply of Mild Steel Door Of size 1.00mx2.10m with double leaves,outer frame made of 35x35x5 mm equal MSL angle and shutter frame made of 25x25x5 mm equal MS angle for horizantal and vertical members and the shutter frame strenghtened by stiffness of 2 Nos Horizantal amd 3 nos diagonal for each shutter using MS flat of size 20x5 mm fully covered with 18 gauge plain MS full sheet welded with shutter frame neatly and also fixing by welding 6 nos holdfasts , 2 nos of wind appliances , 3 nos of tower bolts, 1 no aldrop , 3 nos of handles, fixing shutter with 6 nos of hinges Doors(1.00x2.10)

Fabrication and supply of Mild Steel door Of size 0.90mx2.1m with double leaves,outer frame made of 35x35x5 mm equal MSL angle mullion section made of 35x35x5 mm T section & shutter frame made of 25x25x5 mm equal MS angle for horizantal and vertical members and the shutter frame strenghtened by stiffness of 1 No Horizantal for each shutter using MS flat of size 20x5 mm fully covered with 18 gauge plain MS full sheet welded with shutter frame neatly and also fixing by welding 6 nos holdfasts , 2 nos of wind appliances , 3 nos of tower bolts, 1 no aldrop , 3 nos of handles, fixing shutter with 6 nos of hinges Doors(0.9x2.10)

Fabrication and supply of Mild Steel window od size 0.9m x 1.20m with double leaves,outer frame made of 35x35x5 mm equal MSL angle mullion section made of 35x35x5 mm T section & shutter frame made of 25x25x5 mm equal MS angle for horizantal and vertical members and the shutter frame strenghtened by stiffness of 1 No Horizantal for each shutter using MS flat of size 20x5 mm fully covered with 18 gauge plain MS full sheet welded with shutter frame neatly and also fixing by welding 6 nos holdfasts , 2 nos of wind appliances , 3 nos of tower bolts, 1 no aldrop , 3 nos of handles, fixing shutter with 6 nos of hinges

Wiring with 3x1.5 sq.mm (22/0.3) PVC unsheathed S.C.Aluminium cable in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W.switch board with painting of suitable colour for open PVC light point & Fan Point ( as per SD 16)

Wiring with 2x 1.5sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mmx 100mm x 75mm MS switch box for 5A 3 pin non interlocking flush type CS plug wfth painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point (SD 40)

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

s.p.ravindhar