Restoration and conservation of C.A. office building (Phase II) at Deeg Palace Deeg Distt. Bharatpur.(complete work) OW

Amount

Description of items and specification of work to be excuted.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. 14.4.1 For door/ window/ clerestory window

Earth work Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. 2.9.1 Ordinary rock

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement :3 coarse sand (zone-III) derived from natural sources : 6graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing factory made precast RCC Ring, having concrete of strength not less than M-25, of size 1.20 meter dia and having depth of ring 0.50 meter including providing edge binding etc complete, all as per direction of site in-charge.

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) 9.5.1 Second class teak wood ( 35mm thick shutters)

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1cement : 6 coarse sand : 12graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like. 7.2.1 Cement mortar 1:6 (1 cement : 6 coarse sand)

Repairs to plaster of thickness 12 mm to 20mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. with cement mortar 1:4 (1cement:4coarse sand)

Providing and laying vitrified floor / polished red send stone floor tiles/polished red sand stone floor in different sizes (thickness to be specified by the manufacturer) With water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600mm (As per site in-charge requirement)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colors such as White , Ivory, Grey, 4 Coarse sand), Jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment et., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) , of approved make, in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. 13.85.3 With water thin able cement primer on wall surface having VOC content less than 50 grams/liter

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.13.82.2 Two coats

Provision for Electric fittings including labour and material at C.A office Deeg Palace, Deeg etc completion of work as per requirement of side Incharge. Electric wire (4mm) finolex Roll

Electric wire (1.50 mm) -do- Roll

Electric wire (1 mm)-do- Roll

Casing pipe (1x1/2") - 10 fit Long

Power Board PVC of size

Power Switch - 16 Amp Anchor penta

Power Socket - 16 Amp Anchor penta

Screws (1x1/2") Pkt.

Switch 6 Amp Ankar penta

Socket 6 Amp Ankar Penta

Tube light (LED) 20 W

LED Bulb 9W

Holder Anchor penta

Switch Board 4x4

6 Cutting Board PVC

7 Cutting Board PVC

32 Amp MCV Set

3 Pin Top Power 16 Amp Anchor penta

Tap Roll

exhaust fan ISI Haviels/Crompton

charge for electric fitting etc. complete in all respect

Provision for Toilet Sanitary fittings including labour and material at C.A office Deeg Palace, Deeg etc completion of work as per requirement of side incharge. Western Toilet Sheet in one Piece Pareware/Hindware

Indian Toilet Sheet Pareware

Cistern ISI Mark

Men Urinal Pot/Toilet sheet ISI Mark

Wash Basin with Stand -do-

4" Tee PVC

4" CPVC Pipe 40 fit

4" Elbow Bend PVC

4" Socket PVC

Silochan 250gm pkt.

1" CPVC Pipe (Ashirwad) 10 feet Long ISI Mark

1" CPVC Elbow

1" CPVC Normal Tee

1" CPVC Socket

1" overleaping Pipe ISI Mark

1x1/2" CPVC Tee ISI Mark

1x1/2" CPVC Reducer

1x1/2" CPVC Elbow ISI Mark

1" - 45 Degree CPVC Elbow ISI Mark

1" CPVC Tank nipple

1" CPVC Union ISI Mark

1" Gate valve

1" FTA Brash

3/4" CPVC Pipe 10 feet Long Ashirwad

3/4" Gate valve

3/4" CPVC Union ISI mark

3/4" CPVC Normal Tee ISI mark

3/4" Brash Tee ISI mark

3/4" Brash Elbow ISI mark

1/2" FTA Norma ISI mark

1/2" FTA Brash ISI mark

1/2" CPVC Normal Elbow ISI mark

1/2" CPVC Socket ISI mark

1/2" CPVC Plug

1/2" Concealed valve

1/2" Normal MTA

1/2" Brash MTA

S.S water Mixer tab Long for wall Cara

S.S water Mixer tab for wash Basin Cara

S.S Bathroom Shower Cara

S.S water Tab Short Cara

S.S water Tab Longs Cara

Angle valve set Cara

Red Connection 24"

Red Connection 36"

Bracket Patti set

S.S fastener set

Tap Lock

1" PVC saddle Packet

4" pipe PVC Ashirwad

1" keel Patti

water waste pipe set

Water tank 500 Lt. Sintex

5" Blade

6" Blade

Charge for Sanitary fitting etc. in all respect

PAWAN ENTERPRISES

INDRAJ MEENA CONTRACTOR