Construction of control room building with borewell, yard retaining well, boundary wall with fencing, road, cable duct, septic tank and allied civil works for establishment of 33/11KV Outdoor SS at Mathur

Amount

Earth work excavation in all type of soils with an initial lead of 10m and lift of 2m including cost of all leads, lifts, labour for applying as per standard specification.

In Hard Gravely Soil

SDR not requiring blasting

MR and DMR not requiring blasting

Hard rock requiring blasting

Dismantling the RCC, PCC and Brick Masonry in Cement mortar if any met with during excavation for foundation trenches and clearing the debris from site including all labour, lead, lift,T& P etc., complete.

DismantlingReinforced Cement Concrete.

Dismantling Plain Cement Concrete.

Dismantling Brick Masonry

Supplying and filling in foundation and basement with filling sand in layers of not more than 15 cm thick well rammed, watered and compacted complete, as per standard specification including cost of all materials, labour, lead, lift, T&P etc., complete

Providing Antitermite treatment for inside and outside of the building as per standard specification at different stages including cost of antitermite chemicals, lift and labour etc., complete as directed by the engineer in charge.

Refilling with excavated earth wherever required including labour for filling, watering and consolidating with all lead, lift, labour, T&P etc, as per standard specification and as directed.

Transporting the excavated surplus earth and debris by headload upto a distance of 100m including cost of conveyance, loading and unloading and filling in low level places of SS etc., complete, as directed by the Engineer-in charge

Laying plain cement concrete 1:4:8 using 40mm HBG (machine broken) using 220kg min.cement content including cost of all materials, centering, shuttering, lead, lift and labour, curing etc., complete as per std.specification.

Laying plain cement concrete 1:3:6 using 20mm HBG (machine broken) including cost of all materials, centering, shuttering, lead, lift and labour, curing etc., complete as per std.specification.

Laying plain cement concrete 1:2:4 using 12mm to 20mm HBG (machine broken) including cost of all materials, centering, shuttering, lead, lift and labour, curing etc., complete as per std.specification.

Laying RCC in M25 design mix using 12mm to 20mm down graded metal and 360Kg/m3 minimum cement content for various types of work at all levels including cost of all materials, centering, shuttering, lead, lift, labour, curing etc.,complete. (excluding cost of reinforcement)

Foundation and Basement Column upto basement

Grade beam

For footing

Plinth Beam

RCC Side Wall

Cast in situ slab

Precast Slab

Ground Floor Column

Lintel & sill beam

Sunshade & Loft

Stair case

First Floor Column

Lintel& sill beam

Sunshade & Loft

Floor Beam

Floor slab

Providing and laying RMC of design mix M25 Grade Mix with minimum cement content of 360kg/m3 from reputed suppliers on approval and as directed by Board engineers with necessary centering and form work including cost of all materials, conveyance, T&P, labour, lead, lift, pumping arrangements, vibration charges etc., complete (Excluding cost of reinforcement )

Floor Beam

Floor slab

Supplying and fabricating and placing in position of HYSD confirming to IS 1786-Fe 415reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire etc., complete

Building Brick Masonry in CM 1:6. using chamber burnt bricks of size 9"x4.5"x3" including cost of all required materials, labour, lead, lift, curing etc., complete as per std specification and direction.

Foundation & Basement

Ground Floor

First Floor

Building Brick Masonry in CM 1:4 for 115mm thick partition wall using chamber burnt bricks of sixe 9"x4.5"x3" including cost of all required materials, labour, lead, lift, curing etc., complete as per std specification and direction.

For septic tank

Ground floor partition wall and steps

Plastering with cement mortar as indicated below including cost of all materials and all leads, lifts, labours, for plastering at all floors including labour, scaffolding, curing etc., complete as per standard specification.

CM 1:5, 12mm thick

CM 1:3, 10mm thick

CM 1:4, 12mm thick

CM 1:3, 20mm thick

Flooring with Double Charged Vitrified Tiles 600 x 600 x 8mm of approved Quality, design & colour laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete.

Floor Finish with anti skid tiles of approved make (Spartek or Johnson, Kajaria, Nitco or like) of 305x305x6mm/required size and 20mm thick in all floors over a base layer of C.M. 1:3, 20mm thick laid in-situ with required gradient and pointed with same coloured cement including cost of tiles and other materials, labour, lead, lift etc, complete, and as directed by the Engineer-in-charge.

Dadooing with glazed tiles 300*200*6mm of approved make (Spartek or Johnson or equivalent quality) of approved colour and shade to set in CM 1:3, 12mm thick including cost of all materials and labour charges, lead, lift etc., complete as per specification and direction.

Flooring with Industrial tiles of size 300x300x10mm of approved quality (Johnson-Endura) and colour, scratch resistant to set in cement mortar 1:3, 20mm thick for flooring in control room including cost of industrial tiles, all leads, lifts, labour for laying, fixing and finishing neatly as per standard specification and as directed by the Engineer-in-charge ( Industrial tiles colour and shade to be got approved by the Executive Engineer before use )

Flooring with anti skid step tiles of industrial type(Johnson Endura or equivalent) to set in cement mortar 1:3 for steps 20 mm thick including cost of tiles, all lead, lifts, labour for fixing finishing neatly as per standard specification and as directed by the Engineer-in-charge.

Flooring with acid resistant tiles 305x305x6mm to set in cement mortar 1:3, 20mm thick for battery room incluidng cost of tiles, all lead, lifts, labour for fixing finishing neatly as per standard specification and as directed by the Engineer-in-charge tiles colour and shade to be got approved by the Executive Engineer before use.

Laying weathering course with White colour Solar reflective cooling ceramic tiles of size 305x305x7mm approved and branded quality for roof slab to set in cement mortar 1:3 by weight of cement and pointing the tiles with water proofing epoxy powder including cost of all materials and complete as per standard specification.

White washing with cement paint two coats over a coat of primer for ceiling, sunshades, lofts and other surfaces including cost of all materials, brushes, scaffolding charges, watering, curing, lead, lift, etc., complete, as per std specification and as directed by the Engineer.

Painting two coats with best quality plastic emulsion paint of approved quality and colour over one coat of primer over cement plastered surface inside and outside surface, necessary cleaning, preparing the surface, curing including cost of all materials, labour lead, lift, etc., complete, as per std. specification and as directed by the Engineer.

Painting two coats with best quality plastic emulsion paint(exterior grade) of approved quality and colour over one coat of primer over cement plastered surface inside and outside surface, necessary cleaning, preparing the surface, curing including cost of all materials, labour lead, lift, etc., complete, as per std. specification and as directed by the Engineer.

Painting the Battery Room with two Coats of Epoxy Paint Grey Colour with specially made Epoxy brush including the cost of all materials leads,lifts,labour complete etc.,

Painting the new iron work with two coats best quality and approved colour enamel paint over the primer including cost of all materials, labour, primer, lead, lift etc., complete as per std. specification and as directed by the Engineer.

Supplying and fixing in position of anodised aluminiuum glazed door of size 1.20 x 2.1M using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679 Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg / M with everite / pioneer, floor gear rubber beedings, hinges, handle & 5mm thick sun cool glass including cost of materials, labour, lead, lift, etc., complete.

Supplying and fixing in position of anodised aluminium partially glazed single leaf door of size 1.0 x 2.10m using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679 Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5mm thick sun cool glass including cost of all materials, lead, lift, etc, complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open)/Sliding Type from the shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned.Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered/N-Type Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned.Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.

Supplying and fixing of solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter. solid PVC Panneled door with PVC frame

Supplying and fixing in positionof water closet with P trap or S trapwith doouble flapped seat and seat cover with brass hinges and 10lit capacity PVC low level flushing tank with all internal fittings including cost of all materials, all leads, lifts, labour for fixing etc., complete as per std, specification.

European Water Closet

Indian Water Closet(580mmx440mm)

Supplying and fixing of White glazed 550mm x 400 mm wash basin (ISI quality of approved brand) with all accessories such as C.I. brackets, C.P waste coupling, rubber plug and chain and all connection of water inlet and waste water connection , CP Angle cock. nylon connection, brass nipples,C.P.pillar tap etc., including CP soap container, Towel rail and 5mm thick mirror best quality approved brand. Mirror should be framed in anodized aluminium frame 2"x16" of size complete as per standard specification and as directed by engineer.

Supplying and fixing of normal flushing type lipped mouth flat back Urinals of Parryware or reputed make with necessary inlet & outlet fittings etc such as 32mm dia. GM wheel valve, 15mm dia B class GI waster water pipe, 15mm dia nylon connection, 15mm dia brass nipple incluidng cost of all materials, electrification arrangements for automatic flushing, leads, lifts, labour for fixing etc.,complete as per standard specification

Supplying, laying and jointing of PVC/HDPE pipes of approved brand and ISI quality for waterline, sewerling, and rain water downfall pipe etc., including cost of all materials and GI specials, fixing the pipes over BM/CC surfaces by taking grooves and fixing wooden plugs, screws firmly with special clamps as directed.

PVC pipe 180mm 6kg/cm2 for borewell

PVC pipe 160mm 6kg/cm2 drainage line

PVC pipe 140mm 6kg/cm2 for borewell

PVC pipe 140mm dia strainer pipe with slotted holes for borewell

PVC pipe 110mm dia.6kg/cm2 for sewage lines

PVC pipe 110mm dia, 4kg/cm2 for rainwater downfall pipe

PVC pipe 50mm dia, 10kg/cm2 for sewage lines

HDPE pipe 32mm 10kg/cm2

HDPE pipe 25mm 10kg/cm2

32mm dia PVC pipe 10kg/cm2

25mm dia. PVC Pipe 10kg/cm2

20mm dia. PVC Pipe 10kg/cm2

Supplying and fixing of GM wheelvalve of approved brand and ISI quality and brass screws down top etc., wherever required including cost of all materials, lead, lift and labour charges, complete as directed

32mm G.M wheel valve

25mm G.M wheel valve

20mm G.M wheel valve

Supplying and fixing of white marble stone of size 4'x2' and 20mm thick for fixing in between urinals including cost of all materials, leads, lifts, labour for fixing etc, complete as per standard specification.

Supplying and fixing of S.W.Gully trap 150mm with CI gratings including cost of gulley trap with grating and all leads, lifts, labour for fixing in position etc, complete.

Supplying and fixing of PVC nainey trap 75mm dia. for letting out the bath room water including cost of materials, all leads, lifts, labour for fixing in position etc., complete.

Supplying and fixing of 15mm high quality brass screw down bib cock such as leader, zeolite and zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick, gareware or equivalent including the cost of all materials, labour, lead, lift, T&P etc. Complete.

Letter writing the Name of Sub-Station and slogans including cost of paint, labour for writing complete in all respects.

Supplying and fixing 1000lit capacity sintex tank of approved quality including cost of materials labour for fixing lead, lifts etc., complete

Providing projected border of 10cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing etc., complete.

Drilling Borewell in all kinds of soil of size 300 mm diameter by using rotatory drilling power driven/ equipments at top 6"dia and necessary bentonite solution to get a developed surface not less than 5 hours including cost of all materials , labour, hire charges for all T&P's including Mobalisation and demobilisation, leads, repeated lifts for changing the drilling rods to the required depth including cost of all materials, leads, lifts, labour etc, complete.

Suppling and filling with Pebbels for annular spacing in between strainer pipe and earth surface including cost of all materials, leads, lifts, labour etc, complete.

Flushing the Bore well with power rotatory flushing equipments including Mobalisation and Demobalisation, including cost of all materials, leads, lifts, labour etc, complete.

Supply and Erection of single phase 2.0HP Texmo/Kirlosker/Suguna Monoblock Pump of ISI quality and approved make for dewatering, borewell supply, sump to over head water tand etc., with all accessories such as starter, main switch, teakwood board for fixing of main switch, starter, fuse carrier, indicator holder, switch, lamp, etc., earthing arrangements, internal wiring from switch to motor, transportation, concrete bed / steel brackets, labour charges etc., compete., as directed by the Engineer.

Supply and erection of 2HP Submersible of pump having ISI make 3 Phase Suguna or other approved make with Stainless steel pump shell for corrosion resistant and LDB bushes for high wear rsistant and high quality water resistant polymer insulated wires for longer life with foot value suitable L&T make starters including cost of all materials, lead, lift, erection charges etc., complete. For Bore wellrunning condition) for drinking water sump.

Supply and fixing of rails 90 LbS in correct alignment and position for Transformer plinth including cost of all materials, labour, lead, lift, fixing in position and transporting etc., complete.

Supplying, fabricating and fixing in position of MS grills, gates, name boards, handrails and ladder etc., at various levels as per approved design of the Engr. Including cost of steel and other required materials, labour charges, transportation and fixing, takinggrooves in BM/RCC, packing the pockets with CC and painting with one coat metal primer complete

MS grills for gate, wicket gate, windows & Ventilators

MS channel ,MS angle, MS Flats

MS Chequered plates 8mm thick

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supplying Fabrication and fixing of Template including aligining in position as per specification and drawing including cost of all materials labour lead lift etc., complete.

Fabrication and supply of grouting bolt for plinths as per specification and drawing including cost of all materials labour lead lift etc., complete.(20 mm Dia 1.2 m length)

Labour charges for fixing of grouting bolt including aligining in position including labour lead lift etc., complete.

Supplying and fixing of Kerb stone including Labour charges for laying kerb stones in position including all lead lift etc, complete complete

Supplying and filling with red gravel including all lead lift labour watering consolidation , water sprinkler and other T&P etc., complete

Supply and filling of Stone dust in the yard filling including cost of stone dust metal, labour, lead, lift etc., complete.

Supply and filling of stone chips 12mm to 20mm HBG metal with required thickness all lead and lift including all other T&P etc., complete.

Reinforced cement concrete road using M25 concrete including cost of all materials, labour, lead, lift etc., complete.

Providing expansion joint for concrete road at intervals of 10m using prevailed asphaltic pad 20 mm thick to full depth including cost of all materials, labour, lead, lift etc., complete.

Labour charges for Transporting all type of fence posts from casting yard to work site and fixing in correct position etc., complete in all respect.

Supplying and fixing of GI Chain Link fencing- 2" x 2" using 10 Gauge Galvanised Iron Wire (of all sizes) type confirming to ISI specification 278 / 1982 including cost of all materials, labour charges for laying, tensioning , cost of GI binding wire, hire charges for T&P, lead, lift etc., complete.

Supplying and fixing one side polished 20mm thick cuddappa slab for cupboards including cost of all materials lead lift etc complete

Supplying and fixing 6 levers Godrej lock of approved make and quality including cost of all materials lead lift etc complete.

Supplying and fixing of heavy duty Manhole cover with frame of size 0.600x0.600m, including cost of all materials leads, lifts, labour for fixing in position, etc., complete as per standard specification

Supplying and erection of RCC precast well rings of dia 1.35m, 300mm height and 50mm thick including cost of well rings, lead, lift, erection charges, labour etc., complete as per direction and standard specification.

Supplying & fixing of RCC Rings 300 mm dia including cost of all lead, lift, erection charges etc., complete. For Exhaust fan openings.

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

BLUE STONE CONSTRUCTION

K DHINAKARAN

P Sivaguru

m/s Kumar and co

KR CONTRACTOR

ANITECH INFRAA