Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹4.2 LAccepted-AOC | L-1 | Accepted-AOC L-1 Being the lowest bidder | |
| 2 | L-2₹4.8 L+₹53,692.69 (12.7%)Rejected-AOC TILAK WARD CHIMUR KOTWAL NAGAR RING ROAD CHANDRAPUR MAHARASHTRA 442903 | CHANDRAPUR | CHANDRAPUR | MAHARASHTRA | 442903 | L-2 | Rejected-AOC Quoted value higher than L-1 bidder | |
| 3 | L-3₹7.7 L+₹3.4 L (80.9%)Rejected-AOC 02 UMRER PIPLA UDASA APTUR ROAD VILLAGE TOWN APTUR CITY UMRER NAGPUR MAHARASHTRA 441204 INDIA | NAGPUR | MAHARASHTRA | 441204 | L-3 | Rejected-AOC Quoted value higher than L-1 bidder |
Tender Value
₹5.7 L
EMD Value
₹7,200
Closing Date
31 Dec 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SO (Civil)
O/o AGM WCL Umrer Area
Making view point and development works at Gokul OCM under Murpar Sub Area of Umrer Area
2022_WCL_265269_2
um4550-civ-0039-2022-23
Open Tender
Civil Works - Others
Item Rate
90 days
Umrer
Please refer Tender documents.
3 documents required · 3 mandatory
₹7,200
9 Feb 2023
17 Dec 2022
2 Jan 2023
19 Dec 2022
31 Dec 2022
19 Dec 2022
19 Dec 2022 - 24 Dec 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 40 mm nominal size derived from natural sources).
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete
Centering and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).
Brick work with modular extruded brunt fly ash clay sewer bricks ( Conforming to IS: 4885) in cement mortor 1:4(1 cement:4 coarse sand) in foundation and plinth : cement mortar 1:4 ( cement :4 coarse sand)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick coompacted bed of coarse sand , filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
12mm cement plaster of mix:1:6(1 cement :6 fine sand)
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Steel work in built up tubular (round, square or rectanglular hollow tubes etc.) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. etc. complete. Hot finished welded type tubes
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
Painting steel works with Delux Multi surface paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80ltr/10 sqm of approved brand and manufacture
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including primimg coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc
Providing and fixing precast cement concerete kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement:3 coarse sand) , including making joints with or without grooves (thickness of jooints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge.
Supplying of different type decorative plant including loading, unloading , transportation etc complete as per instruction Engineer-in-charge.
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand derived from nautral sources: 6 graded stone aggregate 20 mm normal size derived from natural sources) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including neccesary excavation, levelling & dressing & finishing the top smooth.
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special section, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25mm wide x1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to center , one flange fixed to the ceiling with dash fastener 12.5mm dia X 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hanger of 20X10X50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediateG.I. channels 45X15X0.9mm running at the spacing of 1200mm center to center, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm at 450mm center to center , shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clips made out of 2.64mm dia X 230mm long G.I. wire at every junction , including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partition with the help of rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screw of size 3.5X25mm at 230mm c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings of light fittings, grills, diffusers, cutouts made with frames of perimeter channels suitably fixed all complete as per drawings, specification and direction of the Engineer-in-charge but excluding the cost of painting with 12.5mm thick tapered edge gypsum plain board cnforming to IS:2095-(PART I) :2011 ( Board with BIS certification marks)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
Surface dresing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish, lead up to 50 m lift up to 1.5m. All kinds of soil
Supplying and stacking of good earth at site including royalty and carriage upto 5 Km lead complete ( earth measured in stacks will be reduced by 20% for payment)
Supplying and stcaking at site dump manure from approved sourc, including carriage upto 5Km lead complete ( manure measured in stacks will be reduced by 8% for payment) : screened through seive of I.S. designation 20mm
Spreading of sludge , dump manure and / or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and / or good earth to be paid seperately
Mixing earth and sludge or manure in the required proportion specified or directed by the Office-in-charge
Total impact of GST for the purpose of CTC
O P BALDWA
SINGH BROTHERS COMPANY
stage.html
html • 0.04 MB
techsummary_274388.pdf
PDF • 0.26 MB
finsummary_274388.pdf
PDF • 3.39 MB
aoc1874.pdf
PDF • 2.35 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .