EXTERNAL PERIODICAL SERVICES IN OFFRS MD ACCN AT SHANKAR VIHAR UNDER AGE B/R-II OF GE (SOUTH) DELHI CANTT-10

Amount

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for 5mm thick rendering in CM 1:3 on ceiling and finished fair even and smooth without using extra cement, complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4 upto 3 story building , to be finished even and fair complete all as specified and as directed.

M&L for 15 mm thick cement plaster in patches n exc 3.0 Sqm on fair faces of brick work or concrete surfaces in cement mortar 1:4, to be finished even and fair complete all as specified and as directed.

M&L for applying two coats on newly plastered surfaces of walls/ceilings with Graco-490 spray machine of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A, IS-15489 and IS-101 @5-6 sqm/ltr over and including a coat of primer after cleaning and removing all dirt, dust, oil grease, smog efflorescence, stain and thoroughly brushing the surface and removal of existing paint flakes with necessary tools and machinery to give an even shade and applying one coat of wall putty avg 1-1.5 mm thick suitable for external surafce complete all as specified and as directed. Notes : (i) Application to be done only by Applicator authorised by Manufacturer, which shall be approved by GE before starting of work. (ii) Putty work shall be paid separately under respective item.

M&L for applying one coat of wall putty avg 1-1.5 mm thick suitable for external surafce complete all as specified and as directed.

M&L for removal of existing loose treatment by scraping with mechanical wall/ceiling by vacuum based sanding machine (wall sanding machine with internal dust extraction system & having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7 inch/ 9 inches to make the surfaces free from dust, loose paint etc by using smart periodical methodology/auto roller complete all as specified and as directed

M&L for applying one coat with Graco-490 spray machine, of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A, IS-15489 and IS-101 @5-6 Sqm/ltr after cleaning and removing dirt, dust, oil grease, smog efflorescence, stain and thoroughly brushing the surface and removal of existing paint flakes, to obtain an even surface necessary tools and machinery to give an even shade complete all as specified and as directed. Notes : (i) Application to be done only by Applicator authorised by Manufacturer, which shall be approved by GE before starting of work. (ii) Additional coat may be required to be done, if desired if smooth even finish is not achieved on the surface. Same shall be done without any extra cost to Govt

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and as directed.

M & L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coats of synthetic enamel paint complete all as specified and as directed

M&L for preparation of old painted surfaces of steel of any description over 10cm width or grith and applying one coat of aluminum paint complete all as specified and as directed.

M&L for demolition of concrete dropping / side of roof slab N exc 0.5 m width including making good the surafce by dubbing out 20mm thick on irregular surface , plastering with 10 mm thick cement plaster in CM 1:4 finished even and fair including cutting channel groove in ceiling / roof projection finishing it with Water proofing compound complete all as specified and as directed.

M&L for preparing of old painted surfaces of CI pipes any description, n. exc 60 cm girth including holderbats, distance pieces, etc. (length measured over bends, branches etc.) and applying one coat of black Japan paint complete all as specified and and as direcred.

Hacking out old broken glass n.exc 1.50 Sqm(any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and and as direcred.

S&F, Sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

S&F PVC handrail cover of width 50/65 mm as specified in IS 12867 (1989) complete all as specified and as directed.

M&L for 50mm thick (Average) guniting in patches on to the required area of RCC parapets, walls, columns, beams, stairs, lintels, sunshades, roofing slab etc. of all sizes and shapes at all heights from existing ground floor and all locations with cement and sand mortar 1:3 (1 Cement : 3 Sand) under 2 to 2.8 Kg/Cm2 pressure, after removing the damaged loose spalt concrete portions by chipping, removal of dust and applying one coat of rust convertor kp-100 or equivalent grade over reinforcement wherever necessary, providing and tying in position with 75mm x 75mm square size with 2.946 mm dia mild steel wire welded mesh over treated surface, ready to receive grouts, curing for 10 days etc. including labour charges, hiring charges for all tools and plants, machineries, cost of consumables, scaffolding, all types of protective equipment, plant floors, pipelines, vessels, materials etc. complete all as specified and as directed.

Cutting of vegitation , sapling and bushes(girth n.exc. 300mm) from roof,terrrace,chajjas ,wall etc.digging out the root and making good the surfaces in PCC (1:2:4) type B1 with surfaces finished to match including scaffolding upto three storeyed bldg and brooming entire roof and removing waste out side of M.O.D. land complete all as specified and as directed.

M/S VERMA BUILDER (BID ID -3103957)

HANUMAN BUILDERS (BID ID -3103348)

M/S Parmod Johar (BID ID -3103935)

YP INFRA (BID ID -3104145)

P R Constructions (BID ID -3118436)

PG CONSTRUCTION AND COMPANY (BID ID -3106441)