THONDI Supply OF Light Commercial Vehicle

Amount

Supply and delivery of Light Commercial Vehicle (Tata Ace)

The quantities have given are those upon which the lump-sum tender cost at the work is caused but they are subject to alterations, omissions, deductions or additions as provided for in the conditions of the contract and do not necessarily show the actual quantities of the work to be done. The unit of rates noted below are those governing payment for extras or deductions for omission according to the conditions of the contract as set forth in the conditions and specification for the contract.

It is to be expressively understood that the measured work it is to be taken out (Not withstanding any customarily practice to the contrary according to the actual quantities when the place and finished accordingly to the Drawings or as may be ordered time to time by the Town Panchayat Engineer and the cost calculated by works connected there with. The rate quoted is for the works in site and complete in every respect.

The material required for the works must be supplied by the contractor and of the approved quality

Displacement (CC) / Engine capacity.-700 CC - 1250 CC

Max Power20- 30BHP @ 2500 rpm and above

Max Torque5OONM @ 2000 rpm and above

Type of fuelDiesel

Load Capacity2 cu.rn

Vehicle emission NormsBS -VI

No of cylinder in engine2 — 4 cylinder

Length of chassis3800 mm - 3950 mm

Width of chassis1500 mm — 1550 mm. Ground clearance. 150 mm -165mm

Fuel tank capacityDiesel-30 Ltrs to 40 ltrs CNG- 12-25kg

Size of Tyre’s & No‘s145 R 1 2 — 5 N os.

Wheel base1900 mm — 2250 mm

Gross vehicle weight1550 kg 1900 kg

ClutchSingle plate dry friction diaphragm

Transmission SystemManual

No of speed/ forward gears4 Nos Speeds(4F+ 1R)

Type of SteeringManual / Power

Speed GovernorsShall be Fitted

Pay Load800Kg to 1000Kg

Tipper body length2100 mm-2200mm, Mild steel

Tipper body Width1400 mm - l500mm, Mild steel

Tipper body Height750mm- 950 mm, Mild steel

Side portion (LH & RH)& rear doors Sheet thickness2 mm, Mild steel

Tipper body top sheet including frame sheet thickness1.6mm, Mild steel

Tipper Body Top Lid Sheet thickness1.2mm, Mild steel

Tipper ContainerTipper Container should be Fabricated with two doors on the rear side and four doors on four top corners of the containers with hinges and locking system. A partition shouId be provided on the middIe of container along the vertical len gth of the body.

Tipper Body Top Lid main Sheet thickness75 x 40 x 6 mm

Hydraulic cylinder makeReputed Make

Hydraulic system drivenMain Engine

Pump MakeAs per IS standard

Pai ntingShould be painted with one coat of Anti-corrosive epoxy primer and two coats of enamel paint for approved quality to ensure long lasting resistance for weatheri zing and breaka 9e. The color shade should be as per norms.

LetteringTo be carried out as directed by Dept ofñcers

Tipper body rear doorShall be with necessary locking facility .

Side safety guardShall be provided as per RTO requirement

Additional conditionsVehicle with fuel sensor and GPS tracking.

Warranty Distance/Year25000KM//12 months whichever is earlier.