COMPREHENSIVE B/R MAINTENANCE WORK AT COD DEPOT AND ME LINES UNDER GE DEHU ROAD

Supply only in repairs stainless steel fancy type curtain rod 25 mm dia complete with bracket and side knobs all as specified and directed.

Supply only in repairs floor door stopper, with 150 mm long of Aluminium body and tounge with hard drawn steel spring in floor

Supply only in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm including necessary beadings and fillets complete all as specified and directed.

Supply only in repair 3mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm each pane including oil putty complete all as specified and directed.

Supply only in repair200mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. .

Supply only in repair 250mm long sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply only in repair 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

Supply only in repair 150mm aluminium alloy handle, cast type, anodised

Supply only in repair door closer hydrau lically regulated,designation No.1universal type, Aluminium body extruded sec body suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed.

Supply only in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply only in repair Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

Fixing only in repairs floor door stopper, with 150 mm long of Aluminium body and tounge with hard drawn steel spring in floor

Fixing only in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm including necessary beadings and fillets complete all as specified and directed.

Fixing only in repair 200mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed.

Fixing only in repair 100mm long Aluminium tower bolt, stove enamelled black with bright bolt complete all as specified and directed.

Fixing only in repair 250mm long aluminium long sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Fixing only in repair 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

Fixing only in repair 150mm aluminium alloy handle, cast type, anodised

Supply only in repair water tank cover for tanks of size 500 ltr or 1000 ltrs complete all as specified and directed.

Supply only in repair PVC seat cover for EWC of white colour complete all as specified and directed.

Supply only in repair 15 mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply only in repair 15 mm bore long body bib tap, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply only in repair 15 mm bore Stop valves/, cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only in repair 15 mm bore Stop valves/angle valve, fancy type chromium plated cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.

Supply only in repair 15 mm Brass CP Wall Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply only in repair 32mm waste fittings, brass, chromium plated for wash hand basins,sinks etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.

All as per item No.30 here- in- before but 40mm dia.

Supply only in repair Grating doom 125mm dia of stainless steel with hole/without hole complete all as specified and directed.

Supply only in repair 15mm PTMT Bib tap standard of any colour screwed, for iron pipe and fixed complete all as specified and directed. (Make: Prayag/Shakti)

Supply only in repair 15mm Ball valves, high pressures of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) (Make: Prayag/Shakti) complete all as specified and directed.

All as per item No.34 here- in- before but size 20mm dia and Minimum wt (for 20mm -210gms) (Make: Prayag/Shakti)

Supply only Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge

Fixing only in repair water tank of size 500 ltr complete all as specified and directed.

Fixing only in repair water tank of size 1000 ltr complete all as specified and directed.

Fixing only in repair Wash down water closet (Pedestal pattern), complete complete all as specified and directed.

Fixing only in repair Water closet (Squatt pattern) complete including provision of lime concrete bedding complete all as specified and directed.

Fixing only in repair Wash down water closet wall hung type complete all as specified and directed.

Fixing only in repair 15 mm bore long body bib tap, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Fixing only in repair 15 mm bore Stop valves/angle valve, fancy type chromium plated cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Fixing only in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.

Fixing only in repair 15 mm Brass CP Wall Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Fixing only in repair 15mm/20mm Ball valves, high pressures of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms)complete all as specified and directed.

Fixing only Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge

Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed.

s & F 15 mm bore GI pipe conceled medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.

S & F 20 mm bore GI pipe conceled medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.

Supply only GI nipple, and socket 15mm bore size complete all as specified and directed.

Supply only GI nipple, and socket 20mm bore size complete all as specified and directed.

Supply only GI Elbow, and Tee 15mm bore size complete all as specified and directed.

Supply only GI Elbow, and Tee 20mm bore size complete all as specified and directed.

Supply only Socket reducer, and Tank connection 20mm bore size complete all as specified and directed.

Supply only PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

All as per item No. 57 here- in- before but 600mm long.

Disconnecting existing tanks, exc 500 and n exc 1000ltrs capacity setting aside (or lowering if required), cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position.

S&F 500 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed.

S&F 1000 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 1000 Ltr capacity complete all as specified and directed.

S& F in repairs Brass chromium plated shower rose 125mm size with swivel joint, including fixing to steel pipe or union 15mm bore.

Supply only 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and brackets complete all as specified and directed. Specification of flushing cistern shall be as per IS 7231-1994.

S & F in repairs Vitreous China wash basin white, flat back, size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm waste fitting brass, chromium plated with long screwed shank and fly-nut, flange end bedded in red lead cement, brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore, including necessary packing, union and cap and fixed in repairs. Note:wash basin shall conform to IS 2556(part-4)-2004.

M&L for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with and including 5 litres PVC automatic flushing cistern, including brackets, flush pipe, CP urinal spreader, grating union , union and cap and discharge pipe; fixed in repairs.

S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests including flushing cistem & fush pipe fixed in repairs .

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat cover, flush pipe, flushing cistern incl all joints complete

M&L for PVC (SWR) floor trap(75 mm dia), plain with grating including jointing with solvent cement to mitigate the site requirement to the entire satisfaction of engr-in-charge.

Supply only 20 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed

Supply only soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed.

supply only 32 to 40mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed.

Demolition of brick or stone/boulder masnory, built in cement mortar.

Material and labour for Modular Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in and setting in mortar CM 1:6, complete all as specified and as directed by engr-in-charge.

Taking down cement plaster on brick walls or concrete surface including raking out joints hacking for key and scrubbing down with water etc. complete all as specified & directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L for 5mm thick rendering in cement mortar in 1:3 to concrete surfaces as in ceiling in patches, finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L two coats of white wash to new plastered surfaces on ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge.

M&L for two coats of cement base paint on new plastered surfaces of walls including prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge.

M&L for two coats of oil bound distemper on new plastered surfaces of walls including 3mm thick wall putty on plastered wall surface incl prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.

M & L for joint free Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to over & including 15mm thick Screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.

All as per item No 83 but on skirtings incl 10 mm th rendering in CM (1:3) complete.

M&L full body Vitrified Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed.

M&L full body Vitrified Ceramic tiles in skirting/dado of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in skirting to match the vitrified ceramic couloured light shade floor tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick backing or rendering coat of plaster in cement mortar 1:4, complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 450 mm x 300 mm and 7 mm thick of approved colour as in verticle surfaces such as skirting, dado and risers to steps etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick backing coat in cement mrotar1:4 including triangular filleting in cement mortar 1:4 on top of skirting/dado etc complete all as specified and directed.

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site n exc. 1.5 Sqm each complete all as specified and as directed

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm

M/L for PCC 1:2:4 type B1 in door frame filling all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing. The door frame shall be tied to wall using 75/100mm long screw as directed

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S&F factory made 35 mm thick plain framed paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood.

S & F Glazed skeleton shutter 35mm thk IInd class HW open rebated and prepared to receive glass, gauze etc (without shash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze etc ; size of members of shutters as specified in SSR Pt-I, section 8 clause 8.24 (a)

S & F galvanised mild steel wore cloth, 0.63mm nominal dia of wire and avg width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

S&F Anodised aluminium Powder coating frame for ventilators & windows with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, all louvers arrangements, screws with powder coating of any colour Complete all as specified and directed.

S&F mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed

S&F 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.

Supply only 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.

S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section.

S&F 150mm long Aluminium handles cast type anodised

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.

M&L for Granite stone slab 18 to 20 mm thickpolished as in steps, jambs, pillars, window cills, cooking platforms and like including scrteed 15mm screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with colour, shade and moulding of edges or cutting grooves in steps complete all as specified and directed by Engr-in-charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Marble work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity upto 500 litres of any type and in any position and writing the date of cleaning complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity exc. 500 litres and not exc. 1000 litres of any type and in any position and writing the date of cleaning complete all as specified and directed.

Extra over rendering for work in isolated width such as in bands, sunk pannels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed.

Supply only Liquid water proofing compound .

M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engr-in-Charge. (a) The Roof surface shall be thoroughly wire brushed washed dried up & cleaned to remove all foreign materials and dust to receive primer. (b) On the dried roof surface, apply one coat of bituminious primer @100gm/Sqm as per manufactueres instruction. (c) On this primed surface the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/Sqm laid by torch applicatioon metho and top surface shall be applied with bituminous aluminium paint. (d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. Note : Obtain material though out to low lying area.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M&L rolled mild steel sections as Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 W (gde E 250 )quality A complete all as specified and as directed.

S&F Tubular Sections as in main cross beams , hip and jack rafters; purlins, where connected to common rafter , posts etc. conf to Fe-410-w(gdeE-250 quality-A)

Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed.

S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed.

All as per item No. above but plain sheet fix in valley gutter / ridge/ View cutter etc.complete all as specified and as directed.

M&L for MS work as in wind tie or any other work incl cutting , drilling holes etc.

Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

M & L for 75 mm thk Cement conc type C-2, 1:3:6 (40 mm grade Agg) as in plinth protection finished even and fair .

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets).

S & F in repairs for 1.00 mm to 2.00 mm thick fibre glass reinforced transulant corrugated sheeting with two corrugations side laps fixed with coach screw and washer in roof , wall etc. complete all as specified and as directed by engr-in-charge.

Supply and fixing for vitreous china european dual type one piece type water closet with flushing cistern of size 780x375x700 mm star white over and including fittings such as s' trap distance pieces 100 mm long etc comple make : Hindware cat part No 92071 or equivalent all as specified and approved Accepting officer.

Please Enable Macros to View BoQ information