REPAIR MAINTENANCE OF AHU ROOMS OTHER MISC WORKS UNDER GE (U) PLANT AND MACHINERY DELHI CANTT-10

Amount

Supply and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diameter with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Supply and fixing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre ,size of grid 605 x 605mm. complete all as specified and as directed.

Supply and fixing Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

Material & Labour Non asbestos fibre cement building boards10 mm thickness fixed or laid/ inserted to timber/GI/Aluminium framework with screw complete all as specified and as directed.

Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) complete all as specified and as directed.

Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) complete all as specified and as directed.

Supply and fixing Pressed steel frames for doors with one or more rebates size 125 x 60mm including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

Supply and fixing Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fixing steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bar and including 12mm dia square bar for guard bars @ 125c/c horizontally complete all as specified and as directed.

All as per item No. 10 above but without glazing bars and grill complete all as specified and as directed.

Supply and fixing stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples/stainless steel wire stapple with screws complete all as specified and as directed.

Supply and fixing Sheet glass, 3mm thick ordinary quality, and glazing with oil putty in squares, not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply and fixing Safety lever locks mild steel with 4 levers and ball bearings for rolling shutters complete all as specified and as directed.

Supply and fixing in repair 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and as directed.

Material & Labour for welding in repair exc 2.5 cm but not exc 5 cm in length thickness of metal to be welded not exceed 6 mm complete all as specified and as directed.

Supply and fixing powder coated aluminium frame for doors, and sliding tracks, beading for grill with one or more rebates including joining cleat for fixing etc. (min thickness of powder coating 50 micron) complete all as specified and as directed.

Supply and fixing anodised aluminium door shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Material & Labour MS framed work as in doors or gates of angle iron or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors etc. tobe prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel, sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290(Gde- E-165) complete all as specified and as directed.

Supply and fixing Steel Rolling Shutters thickness of laths in 1.25mm,without ball bearing,as specified including top cover,anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push or pull or manual type, including dismantling of old rolling shutters complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed.

Material & Labour brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc but cement plaster any description complete all as specified and as directed.

Material & Labour for rendering 15mm thick on fair faces of brick work in CM1:6,finished even and smooth without using extra cement complete all as specified and as directed.

Material & Labour for applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and as directed.

Material & Labour for rendering 15mm thick on other than fair faces of brick work in CM1:6,finished even and smooth without using extra cement complete all as specified and as directed.

Material & Labour for Preparing and applying two coats of cement base paint on new Plasterd surface of wall complete all as specified and as directed.

Material & Labour for Rendering 10mm thick on concrete surfaces of ceiling in CM 1:4 complete all as specified and as directed.

Material & Labour for two coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and as directed.

Dismantling floor, hearth wall tiling etc including cement mortar bedding (but not backing)/ cement plaster including rubbish off the premises complete all as specified and as directed.

Material & Labour for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc laid over 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material & Labour for glazed ceramic coloured tiles of size 450X 350X 7mm thick over 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material & Labour for 18-20 mm thick machine cut kota stone slab flooring over 20 mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Demolition of cement Concrete in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material & Labour for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Supply and fixing Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required thickness of sheet 0.63mm complete all as specified and as directed.

Supply and fixing Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,Fe-410-W(Gde-E-250)quality-B without any attachment complete all as specified and as directed.

Supply and fixing Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections complete all as specified in Fe-410-W(Gde-E-250) qualityB complete all as specified.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any Exc 4kg complete all as specified.

Expanded metal, Exc 4kg cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and as directed.

Material & Labour for 25mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in floor sub base complete all as specified and as directed.

Material & Labour for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified and as directed.

Material & Labour for preparation of new steel & iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fixing, 500 Ltr capacity Rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and as directed.

Supply and fixing in repair 20 mm dia brass gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fixing 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls/ ceilings/ concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and as directed.

Supply and fixing 20 mm Tubes medium grade galvanised with all fitting and fixed complete to walls/ ceiling / concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and as directed.

Supply and fixing in repair vitreous China wash hand basin white size 550 x 400mm including brackets complete all as specified and as directed.

Supply and fixing in repair 15 mm bore dia of pipe pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

Supply and fixing in repair Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed ( 32mm) complete all as specified and as directed.

Supply and fixing in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and as directed.

Supply and fixing 32 mm bore Low density polyethylene (LDPE) pipes for urinal etc complete all as specified and as directed.

Supply and fixing in repair vitreous china white urinals half stall type complete including providing and fixing plugs, screw, 32 mm dia flush pipe, waste fittings, spreader, grating, unions for discharge pipe etc (excluding flushing cistern) complete all as specified and as directed.

Supply and fixing in repair Vitreous china sqatting pan, Orissa pattern, size 580 x 440 mm white , with integral foot rests (excluding flushing cistern and flush pipe ) complete all as specified and as directed.

Supply and fixing in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre ISI marked complete all as specified and as directed.

Supply and fixing in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle sc-rewed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe ) complete all as specified and as directed.

Supply and fixing in repair 15 mm bore Stop valves (angle type) cast copper alloy chrominum plated fancy type screwed down high pre-ssure with crutch or but terfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fixing in repair 20 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

Supply and fixing in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement ( Diameter of outlet 75mm) complete all as specified and as directed.

Material & Labour in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete complete all as specified and as directed.

Supply and fixing in repair Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

Supply and fixing in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls ( 75mm Bore) complete all as specified and as directed.

Supply and fixing in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls ( 110 mm Bore) complete all as specified and as directed.

Supply and fixing in repair PVC (SWR) bends any radius (75mm Bore) complete all as specified and as directed.

Supply and fixing in repair PVC (SWR) bends any radius (110mm Bore) complete all as specified and as directed.

Supply and fixing MS mortice lock vertical type size 100mm 4 levers complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep in soft/ loose soil complete all as specified and as directed.

Material & Labour Hard core of Broken bricks of gauge n.exc 63mm deposited spread & levelled in layers n exc 15cm watered and rammed to a true surface thickness complete all as specified and as directed.

Material & Labour for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and as directed.

Supply and fixing 80 mm thick, machine pressed rubber moulded, glossy coloured, precast conctete interlocking paver block any shape and size of M-40 grade of approved shade with grey cement and pigment laid over 50mm thick sand cushion and filled with fine sand complete all as specified and as directed.

Material & Labour for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and prepairing surface with plaster of paris etc and applying two coat of white wash on walls mixed with adequate qty of fevicol complete all as specified and as directed.

Description all as per Item No 74 above but on ceiling complete all as specified and as directed.

Material & Labour for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, and applying two coat of cement base paint on walls tinted or white including complete all as specified and as directed.

Material & Labour for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Description all as per item No 77 here-in before but on steel surfaces and complete all as specified and as directed.

Tushar engineers (BID ID -3105852)

J.P. Enterprises (BID ID -3104143)

NAVYUG VYAPARI (BID ID -3100596)

STAR CONSTRUCTION CO (BID ID -3097236)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3097789)

Rohan Construction Company (BID ID -3106687)

P S TRADERS (BID ID -3102177)