Renovation of Division office complex and sub division complex by way of white washing painting interlock tiling in front of driver room and allied work with basic amenities.

13.1: Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. For Division Office, Driver room, Sub Division Complex Qty: - 11,975 Sft = 1112.51 sqm

Providing and applying white cement-based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick. For Division Office, Driver room, Sub Division Complex Qty: -10,100 sft = 938.32 sqm

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. 13.93.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/liter. For Division Office, Driver room, Sub Division Complex Qty: - 11,975 Sft = 1112.51 sqm

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. For Division Office, Driver room, Sub Division Complex Qty: - 11,975 Sft = 1112.51 sqm

4.4.7: Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: - 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) SH 16.93 Qty = 2.8 cum

16.93.1 : Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & patterns’ SH. 16.93.1 Qty = 865 Sft = 80.36 SQM

Locking of Edges Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work up to plinth level with: - 1:2:4 (1 cement: 2 coarse sands: 4 graded stone aggregate 20 mm nominal size). Total Qty = 2 cum

Carriage charges above mentioned job including lobour and transportation charges