Construction of 1st floor at Computer Center Building, Gautam Buddha University, Greater Noida

Sr. No. Description DSR Amount NDSR Amount

GRAND TOTAL 3,34,65,993.27

GRAND TOTAL 3,34,65,993.27

Digitally signed by ASHWANI

ASHWANI KUMAR BANSWAL

BOQ FOR ADDITION OF FIRST FLOOR AT COMPUTER CENTER, GAUTAM BUDDHA UNIVERSITY ,

Sr. No. Description DSR Amount NDSR Amount

1 DISMANTALLING 3,72,641.19 69,919.42

2 MASONRY AND PLASTER 1,33,65,008.90 53,643.98

3 PAVING & WET WORKS 93,99,151.37

6 FINISHING & MISCELLANEOUS 13,34,391.25 3,80,461.09

Sr. No. DSR No. Description Unit Quantity DRS Rate DSR Amount NDSR Rate NDSR Amount

1 DISMANTALLING

Demolishing brick work manually/ by mechanical means including stacking of serviceable

1.1 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including

1.2 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.12.1 Of area 3 sq. metres and below each 2.00 274.50 549.00

Dismantling tile work in floors and roofs laid in cement mortar including stacking material

within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 62.00 54.85 3,400.70

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable

1.4 15.25 material and disposal of unserviceable material within 50 metres lead. 190.30

Dismantling old plaster or skirting raking out joints and cleaning the

1.6 15.56 surface for plaster including disposal of rubbish to the dumping ground 39.00

within 50 metres lead. sqm 600.00 23,400.00

Dismantling roofing including ridges, hips, valleys and gutters etc.,

and stacking the material within 50 metres lead of:

Demolishing brick tile covering in terracing including stacking of serviceable material and

disposal of unserviceable material within 50 metres lead. sqm 1,322.43 1,05,265.20

Removal of exisiting VRV units from terrace at floor and stacking it at a designated position

on ground floor as per directions of engineer-in-charge. per HP 175.00 378.90 66,308.19

Dismantling G.I. pipes (external work) including excavation and refilling trenches after

1.10 15.44 taking out the pipes, manually/ by mechanical means including stacking of pipes within

50 metres lead as per direction of Engineer-in-charge :

1.10.2 15.44.2 Above 40 mm nominal bore metre 15.00 117.75 1,766.25

Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking

within 50 metres lead :

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars

1.12 15.3 and disposal of unserviceable material within 50 metres lead as per direction of Engineer - 2,534.70

in- charge. cum 0.56 1,411.83

Demolishing cement concrete manually/ by mechanical means including disposal of

1.13 15.2 material within 50 metres lead as per direction of Engineer - in - charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) cum 4.35 1,072.80 4,666.68

Disconnecting damaged overhead/terrace PVC water storage tank

1.14 14.79 of any size from water supply line and removing from the terrace 317.75

including shifting at ground level as per direction of Engineer-in- charge. each 3.00 953.25

Removal and refixing of overhead/terrace PVC water storage tank

of any size as per direction of Engineer-in- charge. each 3.00 3,611.23

Carriage of material by mechanical transport including loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

SUB TOTAL OF DISMANTALLING 3,72,641.19 69,919.42

2 MASONRY AND PLASTER

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation

7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) sqm 90.00 932.10 83,889.00

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of

half brick masonry. sqm 90.00 7,209.00

Half brick masonry with non modular fly ash bricks of class designation 10, conformingio IS

:12894, in super structure above plinth and upto \floor V level.

6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) sqm 1,897.93 917.00 17,40,401.81

2.4 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix:

2.5 13.4 ROUGH CEMENT PLASTER :- 12 mm cement plaster of mix

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement

concrete work, using cement content as per approved design mix, manufactured in fully

automatic batching plant and transported to site of work in transit mixer for all leads,

having continuous agitated mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of

laying , excluding the cost of centering, shuttering finishing and reinforcement, including

cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard

setting of concrete, improve workability without impairing strength and durability as per

direction of the Engineer-in-charge. (Note :- Cement content considered in this item is @

330 kg/ cum.Excess/less cement used as per design mix is payable/recoverable

5.37.2 All works above plinth level upto floor V level cum 311.70 9,802.20 30,55,345.74

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to

15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and

spiral stair cases above plinth level up to floor five level, excluding the cost of centering,

shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3

graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete above plinth level.

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 39,771.00 83.50 33,20,878.50

Supplying and applying pre tested and approved water based concrete curing

2.9 5.41 compound to concrete/ masonry surface, all as per manufacturer’s specification and

direction of Engineer-in-charge.

5.41.1 Non pigmented wet curing compound sqm 1,300.00 53.90 70,070.00

Centering and shuttering including strutting, propping etc. and removal of form for :

a 5.9.3 Suspended floors, roofs, landings, balconies and access platform sqm 284.00 693.05 1,96,826.20

b 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 130.00 552.05 71,766.50

c 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts sqm 505.00 733.70 3,70,518.50

d 5.9.7 Stairs, (excluding landings) except spiral-staircases sqm 131.00 622.35 81,527.85

POP PUNNING (12mm-15mm) : Providing and fixing Average 12mm to 15mm thick POP

2.11 MR Punning over cement plaster in line & plumb finished smooth to receive paint. (Internal

surfaces of walls). sqm 200.00 268.22 53,643.98

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)

2.12 11.3 finished with a floating coat of neat cement, including cement slurry, but excluding the

cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm 1,240.00 498.35 6,17,954.00

2.13 2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% litre 577.00 200.85 1,15,890.45

ANTI- TERMITE - Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-

2.14 2.35 termite treatment (excluding the cost of chemical emulsion) :

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25

litres per linear metre including drilling and plugging holes etc.:

2.35.2.1 With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration sqm 1,241.00 39.45 48,957.45

Providing and laying integral cement based water proofing treatment including

2.15 22.7 preparation of surface as required for treatment of roofs, balconies, terraces etc consisting

of following operations:

(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with

water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls upto 300 mm height including cleaning the

surface before treatment.

(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with

50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick

layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing

compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope

and treating similarly the adjoining walls upto 300 mm height including rounding of

junctions of walls and slabs.

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/

sqm of cement admixed with water proofing compound conforming to IS : 2645 and

approved by Engineerin- charge.

(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4

coarse sand) admixed with water proofing compound conforming to IS : 2645 and

approved by Engineerin- charge including laying glass fibre cloth of approved quality in

top layer of plaster and finally finishing the surface with trowel with neat cement slurry and

making pattern of 300x300 mm square 3 mm deep.

(e) The whole terrace so finished shall be flooded with water for a minimum period of two

weeks for curing and for final test.“All above operations to be done in order and as

directed and specified by the Engineer-in-Charge :

22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm. sqm 1,300.00 1,398.50 18,18,050.00

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc.,

2.16 22.5 by applying cement slurry mixed with water proofing cement compound consisting of

(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.

(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement

compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with

water curing for 48 hours.

(The rate includes preparation of surface, treatment and sealing of all joints, corners,

junctions of pipes and masonry with polymer mixed slurry.) sqm 75.00 34,920.00

SUB TOTAL OF MASONRY AND PLASTER 1,33,65,008.90 53,643.98

3 PAVING & WET WORKS

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make,

in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed

of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/

sq.m including pointing the joints with white cement and matching pigments etc.,

complete. sqm 58.00 57,808.60

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness

to be specified by the manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting,

3.2 8.31 risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse 1,030.30

sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of

approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1

cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting

the joints with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of

approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of

cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including grouting the joint with white cement & matching pigments etc. complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and

prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and

similar locations of required size, approved shade, colour and texture laid over 20 mm thick

3.5 8.2 base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,

mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

3.6 8.3 machine polishing to edge to give high gloss finish etc. complete as per design approved

by Engineer-in-Charge.

8.3.2 Granite work metre 6.00 376.25 2,257.50

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen

platform, vanity counter and similar location in marble/ Granite/ stone work, including

necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges

etc. complete. each 8.00 5,876.40

Mirror polishing on marble work/Granite work/stone work where ever required to give high

gloss finish complete. sqm 5.50 2,024.00

Providing and laying flamed finish Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar

3.9 11.55 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade including rubbing, curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge :

Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying Polished Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar

3.10 11.56 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade including rubbing , curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height,

backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse

sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an

admixture of pigment matching the stone shade : (To be secured to the backing and the

sides by means of cramps and pins which shall be paid for separately) :

Red sand stone - Exposed face machine cut and table rubbed with rough backing.

White sand stone - Exposed face machine cut and table rubbed with rough backing.

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface

3.14 8.8 backing including drilling necessary holes and the cost of bolt etc complete.

a 8.8.1 Wedge expansion type

b 8.8.1.2 Fastener with threaded dia 10 mm each 3,601.34 33.35 1,20,104.79

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar

refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and

sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1

3.15 12.55 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble 1,374.10

powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete,

including providing skirting upto 150 mm height along the parapet walls in the same

SUB TOTAL OF PAVING AND WET WORKS 93,99,151.37 0.00

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and

37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of

4.1 12.45 angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing

of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of

80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to

centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and

Including jointing and finishing to a flush finish of tapered and square edges of the board

with recommended jointing compound , jointing tapes , finishing with jointing compound

in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I sqm 851.00 1,117.65 9,51,120.15

Providing and fixing of mineral fiber ceiling tiles, with hot dipped galvanized steel grid

work (Silhotte) , surface chemically cleaned capping pre-finished in baked polyester

paint, Main Tees of size 38 (H) x 15 mm every 1.2M centre to centre, centre to centre to

form a grid of size 600 X 600 mm and suspending the grid from RCC roof using 3 mm GI rod,

6 mm nylon rawl plug and 6mm J bolt at every 1200 mm intervals. And laying mineral fiber

4.2 MR Acoustic ceiling tiles MV B-Pin of size 600 x 600 x 15 OCR mm over the formed grid having 980.00

fire rating of 60 minutes as per BS 47G / 23 of 1987. Light Reflection of > 85%. Noise

Reduction Coefficient (NRC) of 0.70, Sound Attenuation of 32 db, K = 0.52-0.57 W/mk.

Humidity Resistance up to 99% at 50’C. The grid to be used is Silhoutte type as per approval

of the architect

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true

horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel

sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner

with suitably spaced joints to get required length and of size 24x38 mm made from 0.30

mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25

mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at

600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length

600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at

middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size

4.3 12.52 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including,

required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke

detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size

27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4

mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced

at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-

sections shall be pre-painted with polyester paint, all complete for all heights as per

specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and

0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both

sides inclusive) and electro statically polyester powder coated of thickness 60 microns

(minimum), including factory painted after bending. sqm 50.00 75,222.50

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made

hardwood framings hung from ceiling @1000mm centre to centre with 12mm thk. fire

retardant ply on vertical and horizontal surface (straight & curved). Inclusive of finishing in

SUB TOTAL OF CEILING 10,26,342.65 5,31,207.22

5 DOORS & WINDOWS

DOOR FRAMES- Providing wood work in frames of doors, windows, clerestory windows and

other frames, wrought framed and fixed in position with hold fast lugs or with dash

fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood cum 3.90 1,30,183.05 5,07,713.90

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative

type, core of block board construction with frame of 1st class hard wood and well

matched teak 3 ply veneering with vertical grains or cross bands and face veneers on

both faces of shutters.

9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 126.00 3,023.95 3,81,017.70

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

5.3 9.23 edges of flush door shutters (over all area of door shutter to be measured) SQM 401.40

Providing and fixing wooden moulded beading to door and window frames with iron

screws, plugs and priming coat on unexposed surface etc. complete:

9.40.1 2nd class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm

nominal size). 258.00 46,233.60

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete

HANDLES;- Providing and fixing bright finished brass handles with screws etc. complete:

DOOR CLOSERS:- Providing and fixing aluminium extruded section body tubular type

universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the

5.8 9.84 body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with 851.60

double speed adjustment with necessary accessories and screws etc. complete.

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door stopper

with necessary screws, etc. complete. each 50.00 5,335.00

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic

5.10 9.97 AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, complete:

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved

brand and manufacture, including providing and fixing top & bottom pivot & spring type

fixing arrangement and making necessary holes etc. for fixing required door fittings, all

complete as per direction of Engineer- incharge. sqm 4.50 20,015.55

FIRE DOOR- Providing and fixing single leaf 120min Rated Fire Door of size 900x2400. with

vision panel using wired glass complete with Fire proof door frame. One side to be finished

5.12 MR in fire retardant paint and one side to be finished in Laminate of approved shade. All

Frame to be finished in fire retardant paint. All hinges and hardware to be thermatically

sealed and 120 mins fire rated. each 3.00 34,049.38 1,02,148.14

UPVC Windows : Supply and Fixing of Tripple Track/ Tripple Channel UPVC Windows, DGU/

Sandvich Glasses (6 mm Reflective Glass + 10 mm Air Gap + 6 mm Plain Toughned Glass)

on two tracks and SS Mesh on One Track, complete as per the requirement of engineer in

SUB TOTAL OF DOOR AND WINDOWS 11,92,073.15 16,26,211.63

6 FINISHING & MISCELLANEOUS

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to

prepare the surface even and smooth complete. sqm 3,160.00 6,21,572.00

Applying priming coats with primer of approved brand and manufacture, having low

VOC (Volatile Organic Compound ) content.

With water thinnable cement primer on wall surface having VOC content less than 50

grams/litre sqm 3,160.00 1,89,600.00

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre

and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior

paint of required shade (Company Depot Tinted) with silicon additives.

New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming

coat of exterior primer applied @ 0.90 litre/10 sqm. sqm 3,160.00 4,61,992.00

Painting with synthetic enamel paint of approved brand and manufacture to give an

13.61.1 Two or more coats on new work sqm 120.00 121.55 14,586.00

6.6 13.114 Melamine polishing on wood work (one or more coat). SQM 155.00 110.75 17,166.25

Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in

6.7 10.25 position and applying a priming coat of approved steel primer using structural steel etc. as

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works kg 225.00 131.00 29,475.00

ROLLER BLINDS - Providing and fixing of Roller Blind of sturdy aluminium top tube of 38mm

diameter, powder coated bottom bar, with suitable roller clutch mechanism and plastic

ball chain. The Roller Blind fabric should possess the below mentioned specifications with

fabric made up of 85% Polyester and 15% Catonic Polyester. Roller blinds with Solar

protection fabric of high tenacity Polyester Yarn & Fungi static Treatment and should block

the light flux & offer elimination of glare and sunlight / heat radiance. Fabric shall have

visible light & solar properties. 1st weave of thickness 0.32mm ±5% (ISO 2286-2) and

weighing 210g/sm±5%. Flame Retardancy as per AS301.3-1999. Fabric Protected by teflon

fabric protector for water and stain resitance. Harmful substance standard Oeko-tex

standard 100. Constrruction of fabric 16.5+1_ Warp and end/cm 17.5+_1 (fill). Aluminium

profile should have temper WP consisting of alloy 63400 along with anodizing of 10 micron

and powder coating of 60 micron. The tensile strenghth of profile should be 9.10 Kg/mm

square and elongation 18.The control clutch drive unit engineered heavy duty chain drive

pulley operating system consisting of gear clutch housing and locking plug containing

minimum 6 ribs and inserted at minimum of 38mm into roller tube. It is self-lubricating

6.8 MR Exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick

manual removal. Universal clutch is most convenient for large windows down to the

smallest windows. It shall be driven by a ball chain pulley with ball chain and can be

positioned at Right hand or Left hand side of the shade. Clutch gear ratio of 1.75:1 for

reduced operating force on larger blinds.. Mounting hardware brackets universal brackets

including end plug bracket with lock down retainer device. Brackets finish of powder

coated metal installation brackets made of stamped and hardened steel. Roller tube

circular-shaped aluminium tube extruded from alloy 63400 and temper WP. Bottom rail flat-

shaped extruded aluminium from alloy 63400 and temper WP. Ball chain shall be 2mm

diameter cord with plastic balls moulded to form an endless ball chain. It is used for raising

or lowering action of the shades. Plastic parts all plastic components are UV-stable

compounds available white.

Installation, Testing & Commissioning of existing modular type Variable Refrigerant Flow/

Variable Refrigerant Volume air-cooled Outdoor units with R410A Refrigerant, vibration

6.9 MR isolators ,with suitable foundation etc. complete as required. The unit shall be filled with

first charge of the refrigerant and ready for use as required.

SUB TOTAL OF FINISHING & MISCELLANEOUS 13,34,391.25 3,80,461.09

BOQ FOR PLUMBING

SECTION DESCRIPTION S.I (AMOUNT) N.S.I (AMOUNT)

A SANITARY FIXTURES & FITTINGS 121006.85 68259.00

B WATER SUPPLY 139182.00 0.00

C INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES) 235604.05 0.00

Total ( Carried Forward) in Rs. 495792.9 68259.00

BOQ FOR PLUMBING

SUB HEAD A: SANITARY FIXTURES & FITTINGS

DSR - DSR Rate NS Rate DSR Amount NS Amount

SL. NO. DESCRIPTION OF ITEMS UNIT Qty

1 17.78 Providing and fixing white vitreous china extended wall Each 5 13,852.45 69,262.25

mounting water closet of size 780x370x690 mm of approved

shape including providing & fixing white vitreous china cistern

with dual flush fitting, of flushing capacity 3 litre/ 6 litre

(adjustable to 4 litre/ 8 litres), including seat cover, and

cistern fittings, nuts, bolts and gasket etc complete.

MR Providing & fixing glazed vitreous china wash basin with R.S. Each 7 5,835.44 40,848.09

or C.I. brackets painted white, 32mm C.P. brass waste of

standard pattern , C.P brass wall flange 32 mm dia. C.P.

brass bottle trap and union 32 mm dia C.P. pipes to wall

flange. complete including cutting and making good the

walls wherever required.

2 17.23 Providing and fixing white vitreous china flat back or wall Each 4 1,299.75 5,199.00

corner type lipped front urinal basin of 430x260x350 mm or

340x410x265 mm sizes respectively.

4 17.13 Providing and fixing white vitreous china water closet

squatting pan (Indian type) :

17.13.2 Orissa pattern W.C. pan of size 580x440 mm Each 2 2,544.50 5,089.00

5 17.16A Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube Each 5 297.55 1,487.75

upto 1 metre long with S.S. triangular plate to Eureopean

type W.C. of quality and make as approved by Engineer - in -

6 17.19 Providing and fixing controlled flush, low level cistern made

of vitreous china with all fittings complete.

17.19.1 10 litre (full flush) capacity-white Each 2 1,839.70 3,679.40

7 17.22 Providing and fixing G.I. inlet connection for flush pipe Each 7 116.10 812.70

connecting with W.C. pan.

8 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of Each 11 883.05 9,713.55

approved quality & make and as per the direction of

Engineer-in-charge.

9 17.22B Providing and fixing CP Brass Single lever telephonic wall

mixer of quality & make as approved by Engineer in charge.

(a) 15 mm nominal dia Each 1 6,113.60 6,113.60

10 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin

including P.V.C. waste fittings complete.

17.28.1 Semi rigid pipe

1.11 Supply, installation, testing and commissioning of beveled

edge mirror 5.5mm thick of superior quality complete with

necessary finxing arrangements as required i.e., screws/

washers/ fastners/ adhesive etc. as per directions of engineer-

NS in-charge. Sqm 9 1,644.52 14,800.64

1.12 Supply, installation, testing and commissioning of Hand

Shower (Health Faucet) with 8mm dia, 1M long PVC tube

NS and wall hook CP brass wall flange. Each 5 1,386.29 6,931.45

1.16 Providing and fixing C.P. brass bib cock of approved quality

18.49 conforming to IS:8931 :

18.49.1 15 mm nominal bore Each 2 418.95 837.90

1.17 Providing and fixing C.P. brass long nose bib cock of

approved quality conforming to IS standards and weighing

18.50 not less than 810 gms.

18.50.1 15 mm nominal bore Each 2 618.80 1,237.60

1.18 Providing and fixing C.P. brass angle valve for basin mixer

and geyser points of approved quality conforming to IS:8931

18.53.1 15mm nominal bore Each 20 532.00 10,640.00

1.19 Providing and fixing C.P. brass angle piller tap of approved

quality as per approval of engineer in charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink

as per IS:13983 with C.I. brackets and stainless steel plug 40

mm, including painting of fittings and brackets, cutting and

making good the walls wherever required :

17.10.1 Kitchen sink with drain board

i. Detail of Sanitary fixture are for the information of the

Contractor,however model/makes of all sanitary fixtures shall

be selected by Architect/Interior designer/Project manager

and the same shall be binding for execution.

ii. No additional fixing cost shall be paid for change in type of

sanitary fixtures.

iii. Contractor to receive all the above mentioned items & store

at place as directed at site.

TOTAL CARRIED OVER TO SUMMARY 1,21,006.85 68,259.00

SUB HEAD B: WATER SUPPLY

SL. DSR - DSR Rate NS Rate DSR Amount NS Amount

DESCRIPTION OF ITEMS UNIT Qty

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes

having thermal stability for hot & cold water supply including all

(CPVC) plain & brass threaded fittings including fixing the pipe

with clamps at 1.00 m spacing. This including jointing of pipes &

fittings with one step CPVC solvent cement and testing of joints

complete as per direction of engineer in charge. .

Internal Work - Exposed on Wall

18.7.2 20 mm nominal outer dia pipes. Metre 50.00 306.95 15347.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with

clamps at 1.00 m spacing. This includes jointing of pipes & fittings

with one step CPVC solvent cement and the cost of cutting

chases and making good the same including testing of joints

complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the

18.8.2 20 mm nominal outer dia pipes. Metre 80.00 478.15 38252.00

18.8.3 25 mm nominal outer dia pipes. Metre 50.00 561.95 28097.50

18.8.4 32 mm nominal outer dia pipes. Metre 10.00 679.15 6791.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply including all

CPVC plain & brass threaded fittings This includes jointing of pipes

& fittings with one step CPVC solvent cement, trenching, refilling

& testing of joints complete as per direction of Engineer in

18.9.4 32 mm nominal outer dia Pipes metre 50.00 413.70 20685.00

Providing and fixing brass stop cock of approved quality

3 18.16 complete.

18.16.1 15 mm nominal bore Each 5.00 302.55 1512.75

18.16.2 20 mm nominal bore Each 5.00 326.45 1632.25

Providing and fixing gun metal gate valve with C.I. wheel of

4 18.17 approved quality (screwed end):

18.17.2 32 mm nominal bore Each 2.00 581.25 1162.50

Providing and fixing C.P. bass angle valve for basin mixer and

geyser points of approved quality conforming to I.S:8931 a) 15

mm nominal bore.(Jaquar model no. 1133/approved equal).

Providing and fixing unplasticised P.V.C connection pipe with

PTMT Nuts coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 20.00 112.45 2249.00

Overhead water tank : Providing and placing on terrace (at all

floor levels) polyethylene water storage tank, IS : 12701 marked,

with cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but without

fittings and the base support for tank.

Sub-Total of Water Supply Installation 139182.00

SUB HEAD C: INTERNAL DRAINAGE (SOIL, WASTE & VENT PIPES)

SL. DSR - DSR Rate NS Rate DSR Amount

DESCRIPTION OF ITEMS UNIT Qty Amount

Providing and fixing cast iron trap of self cleansing design with cast iron

screwed down or hinged grating with or without vent arm complete,

including cost of cutting and making good the walls and floors.

17.60.1 100 mm inlet and 100 mm outlet

17.60.1.1 Sand cast iron S&S as per IS: 3989 Each 5 1,512.55 7,562.75

2 17.35 Providing and fixing soil, waste and vent pipes.

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Metre 30 1,092.20 32,766.00

17.35.2 75 mm diameter :

17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Metre 40 992.05 39,682.00

Providing and fixing single equal plain junction of reqd. degree with access

door, insertion rubber washer 3mm thick, bolts and nuts complete.

17.43.1.2 Sand cast iron S&S as per IS - 3989 Each 12 722.55 8,670.60

17.43.2.2 Sand cast iron S&S as per IS - 3989 Each 10 549.35 5,493.50

Providing and fixing bend of required degree with access door, insertion

4 17.38 rubber washer 3mm thick, bolts and nuts complete.

17.38.1.2 Sand cast iron S&S as per IS - 3989 Each 5 461.65 2,308.25

17.38.2.2 Sand cast iron S&S as per IS- 3989 Each 5 384.75 1,923.75

5 17.39 Providing and fixing bend of required degree .

17.39.1.2 Sand cast iron S&S as per IS : 3989 Each 5 390.75 1,953.75

17.39.2.2 Sand cast iron S&S as per IS - 3989 Each 5 289.75 1,448.75

6 17.57 Providing and fixing collar.

17.57.1.2 Sand cast iron S&S as per IS - 3989 Each 4 409.45 1,637.80

17.57.2.2 Sand cast iron S&S as per IS - 3989 Each 4 256.30 1,025.20

Providing and fixing MS holder bat clamps of approved design to cast iron

(spun) pipe embedded in and Including cement concrete blocks 10 x10

x10cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate

20mm nominal size) including cost of cutting holes and making good the

7 17.37 walls etc.

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes

and fittings with two coats of synthetic enamel paint of any colour such as

chocolate grey, or buff etc. over a coat of primer (of approved quality) for

10 17.65 new work :

17.65.1 100 mm diameter pipe Metre 30 64.20 1,926.00

17.65.2 75 mm diameter pipe Metre 40 48.85 1,954.00

Providing lead caulked joints to sand cast iron/centrifugally cast(spun) iron

11 17.58 pipes & fittings of diameter :.

Providing & filling the joints with spun yarn,cement slurry & cement mortar 1:2(1

12 17.36 cement: 2 fine sand) in SCI/CI pipes.

13 17.48 Providing and fixing single unequal plain junction of reqd. degree.

17.48.1.2 Sand cast iron S&S as per IS - 3989 Each 4 798.80 3,195.20

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring conforming to

IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I.

rain water pipes embedded in and including cement concrete blocks

10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size) and cost of cutting holes and making good

15 12.38 the walls etc. :

Providing and fixing to the inlet mouth of rain water pipe cast iron

16 12.44 grating 15 cm diameter and weighing not less than 440 grams. each 20 47.25 945.00

MAN HOLES :- Constructing brick masonry manhole in cement mortar 1:4 ( 1

cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation

concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40

mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1

cement : 3 coarse sand) finished with floating coat of neat cement and

making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) finished with a floating coat of

neat cement complete as per standard design :

Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy

duty) 560 mm internal diameter, total weight of cover and frame to be not

less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) :

With common burnt clay F.P.S. (non modular)

19.7.1.1 bricks of class designation 7.5 each 2 10,905.05 21,810.10

Gully Trap :Providing and fixing square-mouth S.W. gully trap class SP-1

complete with C.I. grating brick masonry chamber with water tight C.I. cover

with frame of 300 x300 mm size (inside) the weight of cover to be not less than

4.50 kg and frame to be not less than 2.70 kg as per standard design:

19.4.2 150 x 100 mm size P type

with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

RCC pipe : Providing and laying Non Pressure NP-3 class (Medium duty)

R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar

in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc.

19.35 complete .

Sub-Total of Drainage Installation 235604.05 0.00

DSR 2018 REF. Description

SI. No. Unit Quantity DSR Rate (Rs.) DSR Amount (Rs.) NDSR Rate (Rs.) NDSR Amount (Rs.)

I ELECTRICAL WORKS

1 LT SWITCH GEARS & DISTRIBUTION BOARDS :

1.1 LT PANEL BOARDS:

Design, manufacture, supply, installation, testing and commissioning of following LT

switchgear panels suitable for 415 V, 3 phase, 4 wire, 50 Hz power distribution system. The

panel shall be, Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front,

dust and vermin proof type compartmentalized design fabricated out of 14 SWG sheet

steel, complete with aluminium bus bars, separate earth bus bar to be provided through

out the length of the panel. The incoming and outgoing feeders shall be accommodated

in a modular multitier arrangement, adequate size cable alley, painting, earthing,

numbering, danger plate etc. as required as per specifications and drawings.

Comprising of the following:

One (1) no. 250A 4P Auto Transfer Switch. The ATS shall be suitable for auto as well as

manual mode operation, source priority and time delay setting.

One (1) No. 250A 4P MCCB 10KA

One (1) no. Dual Source KWH Meter with RS 485 port with 1 Set (3 No's) of suitable ratio,

15VA, CL 1.0 C.T,s & control fuses.

One (1) No. Digital Volt, Current & Frequency (VAF) Meter with in built selector switch,

320A/5A CL-1.0,15VA resin cast CTs and control fuses.

Electrolytic high conductivity Aluminium four pole busbars rated at 300 amps having a

maximum current density of 1 amp per sq. mm insulated with heat shrinkable PVC sleeves.

One (1) set of Class B+C/Class I+II (according to IEC 61643) Surge Protection device Single

MOV with built in thermal fuse type with response time < 25 Nano seconds each with 3

numbers for the connection between Phase and Neutral and Spark Gap Encapsulated /

Non-exhausting type with response time of < 100 Nano seconds 1 number between

Neutral and Earth, Lightning impulse current 7 KA(10/350 µsec ) phase to neutral and 25

KA(10/350 µsec) neutral to earth. OBO make

Four (4) Nos. 63A, 10 KA 4P MCBs "C" curve type

Four (4) Nos. 40A, 10 KA 4P MCBs "C" curve type

Two (2) Nos. 32A, 10 KA DP MCBs "C" curve type Set 1.00 2,43,641.10 2,43,641.10

The panel shall be IP52 ingress protection

All MCCBs above 200A rating shall be provided with microprocessor based protection

releases for short circuit, overload with 0.4 - 1 x In adjustable overload protection release.

All MCCBs below and including 200A rating shall be provided with thermal magnetic

protection releases for short circuit, overload protection with 0.8 - 1 x In adjustable

overload protection release.

All MCCBs shall be (Ics=100% Icu)

All MCCBs shall be provided with spreader terminals, phase barriers and rotary handle

operating mechanism.

MCB compartments shall be provided with transparent sheet cover. All outgoing feeders

less than 100A shall be provide with terminal block in cable alley.

1.2 DISTRIBUTION BOARDS :

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

1.2.1 2.4 required. (But without MCB/RCCB/Isolator)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, MCB,

having a sensitivity current 30 mA in the existing MCB DB complete with connections,

1.2.2 MR testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

1.2.3 2.15 required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker

suitable for inductive load of following poles in the existing MCB DB complete with

1.2.4 2.10 connections, testing and commissioning etc. as required.

2 CABLES AND WIRING

Supply of 1100V grade armoured cable having sector / circular shaped aluminium /

copper conductor PVC insulated cores under ground PVC tape wrapped inner sheathed,

GI strip / wire armoured and overall extruded PVC sheathed confirming to IS: 1554, laid on

wall or ceiling using GI clamps and spacers as per route shown at site and further as

2.1 MR directed by Engineer-in charge

185 Sq.mm 3 1/2 core Aluminium cable Metre 95.00 1468 1,39,455.83

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of

2.2 7.7 1.1 KV grade of following size on wall surface as required.

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed GI steel conduit, with

modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single

core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated

copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed steel conduit as

2.5 1.7 required.

c 1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 120.00 263.00 31,560.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

2.6 1.26 excluding modular plate as required Each 20.00 32.00 640.00

Supplying and fixing following modular switch/ socket on the existing modular plate &

switch box including connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet EACH 70.00 111.00 7,770.00

d 1.24.5 6 pin 15/16 A socket outlet EACH 40.00 175.00 7,000.00

e 1.24.6 Telephone socket outlet EACH 9.00 119.00 1,071.00

f 1.24.7 TV antenna socket outlet EACH 15.00 119.00 1,785.00

Supplying and fixing two module stepped type electronic fan regulator on the existing

modular plate switch box including connections but excluding modular plate etc. as

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

insulated, shielded with fine tinned copper braid and protected with PVC sheath in the

2.9 1.19 existing surface/ recessed steel/ PVC conduit as required. Metre 315.00 33.00 10,395.00

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed

2.10 1.53 Steel/ PVC conduit as required.

Supplying and fixing following size/ modules, GI box alongwith

modular base & cover plate for modular switches in recess etc.

2.11 1.27 as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories

in surface/recess including cutting the wall and making good the same in case of

2.12 1.21 recessed conduit as required.

3 DATA / VOICE WIRING SYSTEM

3.1 MR Data Outlet

Supply & fixing of Plug in type RJ45 computer data outlet in existing faceplate/ GI Box in

wall/ furniture/ floor complete as required. Each 50.00 264.87 13,243.59

3.2 Face Plates

Supply & Fixing of Single Faceplate, Single Port (RJ45-DATA) square plate having spring

a) MR shuttered front access for preventing ingress of dust. Each 50.00 93.59 4,679.54

Supply & Fixing of Dual Faceplate, Duplex Port (RJ45 for data ) and (RJ-11 for voice) or as

required square plate having spring shuttered front access for preventing ingress of dust.

Supplying and fixing in position GI box for data outlet suitable for fixing of RJ 45 face plate

3.3 MR complete as required. Each 50.00 237.95 11,897.74

Supplying and laying HDMI Cable with connectors on both ends in existing conduit /

4 FIRE DETECTION & ALARM SYSTEM

17.2 INTELLIGENT FIRE ALARM SYSTEM

Supplying, installation, testing and commissioning of micro processor based intelligent

addressable main fire alarm panel, central processing unit with the following loop modules

and capable of supporting not less than 240 devices (including detectors) and minimum

120 detectors per loop and loop length up to 2 km, network communication card,

minimum 320 character graphics/ LCD display with touch screen or other keypad and

minimum 4000 events history log in the non volatile memory (EPROM), power supply unit

(230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with

automatic charger. The panel shall have facility to connect printer to printout log and

facility to have seamless integration with analog/digital voice evacuation system (which is

part of the schedule of work under SH: PA System) and shall be complete with all

accessories . The panel shall be compatible for IBMS system with open protocol BACnet/

Modbus over IP complete as per specifications.

Supplying, installation, testing & commissioning of intelligent analog addressable

4.2 17.2.4 photothermal detector complete with mounting base complete as required. Each 108.00 2,846.00 3,07,368.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed

MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector

with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete

Supplying, installation, testing & commissioning of addressable horn cum strobe complete

17.3 PUBLIC ADDRESS SYSTEM

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB,

MP3 player (including 6 zone button paging station) with seamless integration facility with

main fire alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms

4.9 17.3.7 operating at 240 Volt AC Supply complete as required. Each 1.00 1,45,780.00 1,45,780.00

17.5 CABLING & WIRING

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with

annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer

4.10 17.5.2 sheath complete as required. (RED Colour) Metre 420.00 141.00 59,220.00

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in

the existing surface / recessed steel conduit of following pairs, cores and size including

4.11 17.5.3 connections and interconnections etc. as required.

4.12 17.5.3.1 Speaker cable Single pair, 2-core, 1.5 sqmm Metre 1,151.00 51.00 58,701.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries

4.13 17.5.4 and accessories like coupler etc. as required. Metre 800.00 50.00 40,000.00

5 LIGHTING FIXTURES AND FITTING

Supply, assembling, installation, testing & commissioning of following type of light fixtures

and fans. All fluorescent fixtures shall be provided with electronic ballast, power factor

improvement capacitors & lamps and installation arrangement using proper support etc.

5.1 complete as required.

Supply, installation, testing and commissining of 2'X2' recessed mounted Luminaire with

Maximum 36 Watt with Lumen output of 3960 lumen. The product should be SMD based

and have non integral isolated driver with 3KV inbuilt surge protection. THD<10%, PF >0.9,

Product should have life class of 50K burning hour at L70 B50 parameter, Luminiare

operating temp 0 D to 45D. Internal wiring should have teflon coted multi strand wires and

external wire should have PVC coated multistrand wires. LM79 & 80 reports to be part of

a MR technical submission. Each 140.00 2,756.14 3,85,860.08

Supply, installation, testing and commissining of Recessed mouted PDC lowdepth(height

should not be more than 35mm) downlights with maximum 12 Watt with minimum 1320

lumen.The product should be SMD based & have non integral isolated driver with 2KV

inbuilt surge protection. THD<10%, PF >0.9,Product should have life class of 50K burning

hour at L70 B50 parameter, Luminiare operating temp 0 D to 45D. Internal wiring should

have teflon coted multi strand wires and external wire should have PVC coated multistrand

Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C.

slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning,

refilling, making good the chase with matching concrete, plastering and painting the

14.12 exposed portion of the clamps complete. Each 60.00 425.10 25,506.00

1200 mm sweep ceiling fan with down rod complete with all accessories as required.

Installation of exhaust fan in the existing opening, including making good the damage,

1.50 connection, testing, commissioning etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and

providing masonry enclosure with cover plate having locking arrangement and watering

pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth

electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.

(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth

electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as

required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring

6.4 5.9 washer spaced at 50mm) Metre 60.00 131.00 7,860.00

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with

6.6 5.18 existing surface/ recessed conduit/submain wiring/ cable as required. Metre 60.00 37.00 2,220.00

TOTAL OF ELECTRICAL WORKS 22,03,835.66 10,73,608.22

ABSTRACT OF QUANTITIES FOR FIRE FIGHTING

S NO. DSR 2019 Description Unit Qty DSR Rate DSR Amount NS Rate NS Amount

Providing laying, testing & commissioning of 'C' class heavy duty MS

Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges,

tapers, nuts bolts, gaskets etc. in ground including welding,

excavation & providing cement concrete blocks as supports,

anticorrosive treatment with coaltar/asphalt tape as per IS 10221,

refilling the trench etc. of following sizes complete as required.

Supplying, fixing, testing and commissioning of butterfly valve of PN

1.6 rating with bronze/gunmetal seat duly ISI marked complete with

nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes

2 11 as required :

Providing, installation, testing and commissioning of non-return valve

of following sizes confirming to IS: 5312 complete with rubber gasket,

3 14 GI bolts, nuts, washers etc.as required :

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm

dia male and female couplings duly bound with GI wire, rivets etc.

4 16 conforming to IS 636 (type-A) as required :

Supplying and fixing first-aid Hose Reel with MS construction spray

painted in post office red, conforming to IS 884 complete with the

5 17 following as required.

20 mm nominal internal dia water hose thermoplastic (Textile

reinforced) type -2 as per IS: 12585

20 mm nominal internal dia gun metal globe valve & nozzle.

Drum and brackets for fixing the equipmets on wall. Connections

from riser with 25 mm dia stop gun metal valve & M.S. Pipe and

Providing and fixing ISI Marked of approved make Fire Extinguishers

complete with all accessories as per manufacturer's specifications.

7.1 NS CO2 gas nozzle type - 6.5 Litre capacity (IS:15683). Nos 3 14,926.43 44,779.30

7.2 NS ABC dry powder stored pressure type 6 kg capacity (IS:15683). Nos 24 1,847.56 44,341.41

Providing, jointing and testing of automaticaly operated Halotron/

clean agent fire extinguishers(cap-4kg,temperature rating-

68degc,test pressure-30bar) complete with all accessories/fittings.