RAJFED/CCF/F/2022-2023/477 Dated 11-06-2022_HARDW

a) .Pallet Die Material should be EN-24 OD – 530 mm ID – 420 mm Face width – 154 mm Coller Depth – 17 mm Coller OD – 489 mm Hole size 10mm The firm-giving rate for this item should mention the out put guarantee from each die.

b) Press Roll Shells with Lock Material EN – 24 OD – 207 / 211mm ID – 150mm Face Width – 117 Grove Depth – 6mm and as per our sample

c) Pallet Die with 4 Nos. of Press Roll Shells with lock specification given as above

A) T – Shaft: As per our sample Material en-24

B) Extra mouthpiece suitable for roller holder shaft (T- Shaft) made of spring steel. As per our sample

Die Holder Ring (Front Rear Wearing Ring) As per our sample. Material Alloy Steel OD – 560 ID – 410, Face width (Thickness – 35) Having 8 Nos. holes at equal distance

Pellet Die Cover As per our sample. Material : Alloy Steel

Eccentric Shaft: Material EN- 24 and as per our sample

Bearing Cover (Plates) for Eccentric Shaft Material : EN – 24, and as per our sample

Set of Sieve for Hammer mill (Grinding Machine). Each set should be made of 2 N0s. (Top and Bottom) made from MS sheet 4mm thick and having holes dia. 6mm / 8mm and shape and size should be as per our sample

Spare Sieve sheets suitable for our fixed gravity type sieve. Each sieve sheet should be made from Stainless Steel having holes 6mm dia and as per our sample L – 70”,W-17 .25”

Roller Studs (Center Bolts) with one cup nut and four piece of tansion ring. Material EN – 24, and as per our sample

Shearing Pin (Bolt) Material MS and as per our sample

Check Nut for Eccentric Shaft Material EN – 24, and as per our sample

Elevator Buckets : Material from 2.5mm thick MS Sheet

Molasses Beaters : Material Ni hard and as per our sample Appox. wt. 650-700 gm.

Molasses Cutting Knives Material Ni hard and as per our sample Appox wt. 520-550 gm.

New Rotor pellet Feeder conditioner rotor hollow pipe & arms should be of Stain Less Steel while end shaft should be of solid MS. Size and shape should be as per our sample

Paddles suitable for screw conveyor made from harded MS, as per our sample

Chain sprocket made from alloy steel having: 1" Pitch: 13 Teeth 21 Teeth 24 Teeth 57 Teeth

Scrapper Assembly made of tempered MS and as per our sample. i) Front ii) Rear

Die Holder Capsule for Senior Pallet Mill. Material EN - 24

Paddle shaft with discharger conveyer in 2” dia. Length of Screw shaft 50” Length of paddle Shaft 100”

Paddle shaft for intake conveyer in 1.5” Length of Paddle shaft 1 x 8’ Length of screw shaft 3x8’

Gun Metal Bush Shaft 8” with collar

Gun Metal Bush Shaft 8” with &without collar

Gun Metal Bush Shaft 2” Gun Metal Bush

Gun Metal Bush Shaft 1.5” Gun Metal Bush

Bearing Cover for Capsule of 13.5” dia material EN – 24, as per our sample

Pellet Die Machine Gate of MS with SS liner (inside) as per our pallet machine

Cooler Pipeline with cyclone as per sample

Pellet cooler as per sample

Electric Motor (semance) Delta star 150 HP

Gear Motor 5 HP (semance make)

Body of Molasses Machine as per sample

Cooler Pipeline as per sample

Slat Conveyor Machine length 36 Feet 4"x12" as per sample

3 hp Gear Motor

5 hp Gear Motor

10 hp Gear Motor

BEARINNGS a) 32224 (Make_ZWZ)

b) 32217 (Make_ZWZ)

c) 1313 K (Make_ZWZ)

d) UCP 208 40mm (Make_NTN)

e) UCP 208 1.5” (Make_NTN))

f) UCP 211 2” (Make_NTN)

Elevator Belt width 10,” 4 Ply 36 Mtr. (Make_MRF)

V – Belts (Make_Fanner) a) A – 54

Tyre F- 80 (Make_Fanner)

Fire Packing Sheet

Namda Pecking

Welding Rod No. - 8

Welding Rod No. – 10

Nut Bolt a) 6 Soot 8” b) 6 Soot 3.5” Half Thread c) 6 Soot 1. 5” d) 5 Soot 4” e) 3 Soot 1” f) 3 Soot 1.5” g) 3 Soot 2” h) 3 Soot 2.5” i) 3 Soot 3” j) 2 Soot 1.5” k) 1/2”x1” l) 1/”x1.5” m) ½”x2” n) ½”x3.5” Half Thread o) ½”x4” Half Thread p) 2 Soot 1.5” - do-with nut

L N Key Bolt a) ½”x1” ¾”x 2” 2 ½ Soot 1”

Washer and Nut a) 6 Soot b) ½ Soot c) 3 Soot d) 5 Soot e) 2 Soot

Fevicol

UNION AUTO AND ALLIED WORKS