REPAIR REPLACEMENT AND CLEANING OF WATER TANKS REPAIR TO EM INSTALLATIONS PERIODICAL SERVICES OVER HEAD RESERVOIR TANKS AND MISC BR WORKS AT DHAR ROAD UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

Taking up or down steel tubing with connections for cleaning for refixing complete of bore 15mm, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing complete of bore 20mm, all as specified .

Taking up or down steel tubing with connections for cleaning for refixing complete of bore 25mm, all as specified .

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia15 mm, all as specified.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, all as specified.

All as per item No 4 above but refixing of old steel water tubing of 15 mm, bore.

All as per item No 5 above but refixing of old steel water tubing of 20mm, bore.

S&F steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 25 mm, all as specified.

Cleaning and removing all scale and dirt etc from tanks and dirt from tanks from mouth of circulaty pipes of capacity exceeding 250 ltrs and not exceeding 500 ltrs including by flushing out water, subbing with brushes cleaning with concentrated hydro chloric acid or caustic soda etc complete & finally washing with fresh water, including Marking or proper date of cleaning with white paint in 50mm of size of font with staencil over a coat of black paint complete all as spcified and directed by Engr-in-Charge.

.Ditto as per per above item No but exceeding 500 lter not exceeding 1000 ltrs

S&F in repair Rotational moulded polyethylene water storage tanks in white colour triple (cylindrical vertical with closed top) hoisted and fixed in position with tank cover threaded Triple Layer including Dismanteling of water tank all as specified in SSR Part-I of Capacity 500 litres all as specified.

S&F in repair Rotational moulded polyethylene water storage tanks white colour (cylindrical vertical with closed top) hoisted and fixed in position with tank cover threaded Triple Layer including dismanteling of water tank all as specified in SSR Part-I of Capacity 1000 litres all as specified.

S&F Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F in repair Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F in repair Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 15 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F in repair Gun metal globe or gate valves high pressure with screwed for iron pipe or for unions of 15 mm bore and fixed in repairs, all as specified and directed

S&F in repair Gun metal globe or gate valves high pressure with screwed for iron pipe or for unions of 20 mm bore and fixed in repairs, all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floor and in paving not exceeding 15 cm thickness ( below or above ground level) complete

M&L for cement concrete of type D2 (1:4:8) using 40mm graded agg in foundation filling and mass concrete or as in foor subase complete all as specified as directed.

S&F PVC Tank cover in repair of capacity 500ltrs to 1000 Ltrs with thread system and locking arrangement incl taking down old tank.

S&F in repair 20mm dia ball brass valves high pressure with poythene ball and flynut complete scwued iron pipes or brass ferrule and fixed

Removal of vegetations from roots etc on wall/Roof area n.exc 1.00 sqm each and making good the disturbed surface by grouting the holes and matching the plastered surfaces 15 mm thick in cement mortar (1:3) complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed by Engineer-in-charge.

S&F PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed with ms clamps with 30mm wide and 3mm thick to walls complete all as specified.(with epoxy joint)

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified.(with epoxy joint)

S&F PVC (SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls etc with ms clamps with 30mm wide and 3mm thick incl dismantling of existing unserviceable pipes of any description and acessaries complete all as specified..(with epoxy joint)

S&F in repair PVC (SWR) bends suitable for 75 mm external dia complete all as specified.(with epoxy joint)

S&F PVC in repair (SWR) junction single, (single T) equal or unequal of 75mm dia.(with epoxy joint)

S&F in repair PVC (SWR) vent cowl of 110mm bore.(with epoxy joint)

PVC pipes, 110 mm external dia, double socketed in any length with rubber ring joints, laid in trenches or in floors SWR pipes, incl dismantling of existing unserviceable pipes of any description and acessaries complete all as specified..(with epoxy joint) .

S&F PVC (SWR) junction single, (single T) equal or unequal of 110mm dia.(with epoxy joint)

S&F PVC (SWR) junction single, (double T) equal or unequal of 110mm dia.(with epoxy joint)

PVC (SWR) branch pieces single Y equal or un equal with access door confirming to IS: 14735, suitable for PVC soil waste discharge pipe 75 mm size complete .(with epoxy joint)

Dismantling of Brickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:4)

ditto as per item No above except bricks

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately)

M&L for rendering 15mm thick in CM 1:6 on brick/stone masonry surface finished even and fair with out using extra cement complete all as specified.

Supply only liquid water proofing compound. Make as per Appx 'E' to Particular Specification.

M&L for preparing new plastered surfaces Applying two coats of OBD/on new plastered surface over a coat of primer of any description of approved tint over new plastered surface.

Preparing new plaster surfaces of walls applying two coats of white wash complete all as specified.

Preparing old surfaces of any description of ceiling applying two coats of white wash complete all as specified.

Preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer , complete all as specified

Preperation of old surface plastered or unplastered by mechanical sander, brooming down or steel wire brushing scraping down oil & grease spots etc and applying One coat of cement base paint on wall surfaces complete all as specified and as directed by Engr-in-Charge

Preparing of old treated surfaces of wall and applying one coats of distempering oil emulsion (OBD), Note :- Rate including required / nessary wall care putty for close of nails hole and patches n.exc 1 sqm complete all as specified.

M&L for RCC (1:2:4) type B-1 using 20mm graded agg as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

M&L Form work to rough finished flat surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Glazed ceramic coloured tiles 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as specified

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:4) complete all as specified

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick in (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match included 15mm thick in CM (1:4) for laying floor finishes complete all as specified

M&L for Non skid ceramic coloured ceramic tiles 7 to 8mm thick in vertical surface (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match included 10 mm thick in CM (1:4) for laying floor finishes complete all as specified

M&L for light shade Virified Ceramic tiles 10 mm thick (square/ ectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar 1:4 for laying floor finishes etc complete all as specified. Make as per Appx 'E' to Particular Specification.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular)polished, area of each tiles not exc 0.36sqm in vertical surfaces such as skirting/dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match included 10mm thick rendering in CM (1:4) on brick or concrete surfaces of finished rough to receive wall tiles complete all as specified.

Taking down top assembly complete (excepet curtains and guide channel of rolling shutter push or pull or manual type and re-fixing the same in same position after necessary repair such as cleaning, replacement of rusted nuts and bolts , including welding/grinding as required for proper and smooth function area of each shutter exc 5 sqm but not exc 10 sqm each complete all as specified and as directed.

S&F in repair steel ball bearing suitable for rolling shutter for smooth functioning of rollng shutter all as specified and as directed

S&F in repair GI pipe medium grade of 40 mm bore (nominal bore) as in suspension shaft for rolling shutter for smooth functionong cut to size inculding necessary drilling etc complete all as specified and directed.

S&F in repair steel spring suitable for mannually operated rolling shutters for smooth functioning complete all as specifed and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; door frame, and similar work conforming to Fe 290 Gde-E-165 all as specified .

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified.

Precast RCC type B-1 (1:2:4), using 20 mm graded stone aggregates cover slabs for manholes, open drains etc. including all mouldings but excluding frame, set in cement mortar (1:4) complete all as specified.

Mild steel bars 6mm to 8mm dia (and flat iron where quered) ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips or welded to flat iron complete all as specified.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified.

M&L Preparing old plastered or unplastered surface, applying two coat of cement base paint of external surface of wall dome / wall saft, beems ,column ,feacea ,chajja of over head reservoir tanks up to 250000 gln and,up to 50 mtr hight in inculiding nessery All equipment, scffolding ,sefty equpment etc complete all as specified

M&L Preparing old plastered surface two coat of white wash paint of internal surface of wall dome / wall saft, beems ,column ,feacea ,chajja of over head reservoir tanks up to 250000 gln and,up to 50 mtr hight in inculiding nessery All equipment, scffolding ,sefty equpment etc complete all as specified

M&L for two coats of exterior emulsion paint (Weather Coat) as in Column, chajja, fin, facia etc on new plastered surfaces including preparation of surfaces complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation etc or insulation boards/slabs/blankets any thickness incl cover fillets.

Providing & fixing False ceiling with Gypsum based ceiling tiles and frame work (with aluminum foil on one side) of size 595 x 595 mm of thickness not less than 9 mm including with GI powder coated frame angle /tee grid frame work for ceiiling with following specfication (a) S&F Angle of side 25x25x1mm powder coated (b) 25x25x1 mm GI powder coated at Bottom tee as in main member (c) 25x25x1 mm thick GI powder coated at bottoam tee as ibn cross members (d) S&F 1.6mm dia GI wire suspenders alongwith adjustable clamps to maintains leveling inculding fixing to ceiling fasteners manufacturers instructions complete. MAKE: VINYL TOUCH of LaGyp (LAFARGE) or equivalent Make as per Appx 'E' to Particular Specification.

S&F Non Asbestos cement bldg board 4mm thick fixed to MS frame work with screws as in ceiling specified and directed.

S&F in repair hood for rolling shutters fabricated with 1 mm thick mild steel, haxagonal,square or circular shape including angle/bottom edge fixed over bracket plate with necessary fixture & fastners and including one shop coat of primer complete all as specified and as directed.

S&F in repair rolling shutter 1.25mm thick with out ball bearingas specified incl top cover and choring road hasp and staple and one shop coat of primer erected in position as including push pull and manuaaly complete all as specified and as directed.

S&F in repair rolling shutter 1.25mm thick with out ball bearingas specified incl top cover and choring road hasp and staple and one shop coat of primer erected in position as including Gear oprated type with beval gear box and crank handle complete all as specified and as directed.

Dismentling of old Stone slabs and tiles of any description or thickness in floors, apron etc. laid bedded and pointed in any mortar.

M&L for machine cut kota stone slab 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 4 for laying floor finishes complete all as specified.

M&L for machine cut kota stone slab 15-16 mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting invertical surface complete all as specified and as specified.

Taking down chowkats with shutters w/o taking of shutters from the frames n. exc 1.50 Sqm

All as per srl item 30 above but exc 1.50 Sqm and n exc 4.00 Sqm

Taking downs shutter not exc 1 Sqm each

Taking downs shutter exc 1 Sqm & n exc 2 Sqm each

S&F for 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, both sides laminated with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F factory made 35mm thick 2nd class hard wood glazed/skeleton shutter open rebated and prepared to received glass, gauge etc with mullions (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part I

S & F 100mm long Hasp and staple mild steel wire type stove enameled black, including bolt to hinge plate and fixed with screws.

Mild steel framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar works conforming to Fe-290 Gde E-165

Hacking out old broken glass panes size quality or description from metal frames incl punching or drilling out old glazing pins/ spring clips and providing and fixing new etc

S&F sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane 3mm thick all as specified

. Ditto as above but pin headed

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aparture 1.18mm complete all as specified and directed

All as per item No 90 above but fixed in repairs

S&F MS butt hinges medium weight cold rolled mild steel 100mm

S&F 300mm long ordinary rat tail rod pattern spring incl roller and plate fixing wooden/MS door frame as requird, complete all as specified

M&L for applying one coat of synthetic enamel paint on old painted wooden surface exc 10cm width or girth all as specified incl preparation of surfaces

All as per item No above but on steel surfaces

M&L for 60mm thick Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thick M-35 Grade with grey cement and pigment of any pattern and including 25mm thick sand scushion all wall in rammred and leveled as approved by GE and as per manufacture Instruction complete all as specified.(Shape and size will be approved by GE)

M&L for 80mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thick M-40 Grade with grey cement and pigment of any pattern as including 25mm thick sand cushion in rammared and leveled approved by GE and as per manufacture Instruction complete all as specified..(Shape and size will be approved by GE)

S&F Steel windows made up of box steel section of 16 gauge ms sheet ub outer frame, shutter farame and centre frame with outer side glazed shutter and inner side wire mesh shutter fixed as shwon in drg consisting with two nos pintol hinges 100 mm long, two nos stove enemaled tower bolts 150 mm long and one no steel handle, deovitailed are welded each panelan complete with necessary cleats and stopers all as specified as directed.

Dismantling of AC corrugated/CGI sheet , any gauge, thickness, including Nainital or similar pattern roof coverings all as specified.

S&F pre painted galvaliume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed. Make as per Appx 'E' to Particular Specification.

S&Fpainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make as per Appx 'E' to Particular Specification.

S&F in repair Vitreous china squatting pan of pattern Orissa Pattern size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe fixed in repair including placing in position in floor and embedded in cushion of PCC 1:7:12 type E-1 and finishing the top surfaces to match with the existing flooring ( Cat Part No 4055 maKE PRAYAG OR EQUIVELENTMake as per Appx 'E' to Particular Specification.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description.Cat part No 501 Make as per Appx 'E' to Particular Specification.

S&F in repair of vitreous china Wash basin white type of size 550x400 mm including CP waste fitting&waste pipe etc with sutiable fixing arrangement to wall including taking down old complete all as specified and directed. (CAT NO:-4641, Make as per Appx 'E' to Particular Specification.

S&F in repair Waste coupling, 32mm dia, of PTMT (half or full threaded) .complete all as specified.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75mm diameter of outlet, all as specified.

Dismantling of cast iron, CI/AC / PVC pipes including all fittings and accessories, of 100/75 mm dia and in any position all as specified.

S&F PVC(SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls/under floor with PVC brackets/clips including under floor will be coverd in PCC 1: 3:6 as complete all as specified(with epoxy joint)

S&F PVC(SWR) pipes, 110 mm external dia double socketed in any length with rubber joints, fixed to walls/ under floor with PVC brackets/clips including under floor will be coverd in PCC 1: 3:6 as complete all as specified.(with epoxy joint)

S&F PVC (SWR) bends suitable for 75 mm external dia complete all as specified.

S&F in repair Bib taps,long body, fancy type,chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, all as specified.Make as per Appx 'E' to Particular Specification.

S&F in repair Angle valves fancy type, chromium plated, cast copper alloy, with long shank and cup screwed for iron pipe or for unions of bore dia 15mm and fixed, all as specified

S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm long (CAT NO:-323-Z, Make as per Appx 'E' to Particular Specification.

S&F in repair Brass chromium plated shower rose with arm 225 mm size with or without swivel joints, any size incl fixing to steel pipe or union complete all as specified.(CAT NO:-BS-73, Make as per Appx 'E' to Particular Specification.

S& expanded metal, cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixed with mild steel staples frame in covering of opening of any description S&F complete to wood or steel member not exc 4 kg per sqm.

M & L for 50mm thick PCC 1:2:4 type B-1 (using 20mm agg. ) as in plinth protection / path/ any paved area finishing cement concrete surface even and smooth complete all as specified and directed.

M&L for PCC 1:2:4 type B1, using 20mm graded aggragate as in kerbs or mud stops, rounded or chamfered on edges and sides of tiles completed as specified.

MandeepConstructionCo

PARAS RAM ASGOTRA AND SONS

MAHADEV ENTERPRISES