LADIES PARK NEAR SHANTINIKETAN, BHARTI NIKETAN, KAILASH NAGAR, ZONE 12, BHOPAL

Amount

Ladies park near Shantiniketan, Bharti Niketan, Kailash Nagar, Zone 12, Bhopal

Accupressure Tiles

M.S Bench

WATER COOLER 80LTR

FABRICATED STAND

RO WITH ALL REQUIRED ACCESSORIES

providing and fixinf of cast iron lamp post of 3 mtr lenght without bracket having a decorative base up to the height of at least 1 mtr then decorative vertical section of cast iron with victorian pattern, as per design inclosed the base shall have provision of fixing MCV OR CUTOUTS. the installation will be done by digging a pit of suitable size any size of soil/rock/road including concreting of foundation of cast iron pole etc. by sement concrete of 1;3;2;6 ratios, the pole shall be panted by UV PROTETIVE MATELIC / atractive antique looking pant rick antique a little variation in design may be parmitted subject to approved of enginer incharge.the cast iron material must follow ISI-FG-15 grade specification and having hardness of 135 to 165BHN Make-dawarka casting or home dek or eqvivallent ISO 9001-2008 COMPANY (ANY OYHER EQVIVALENT MAKE WILL BE APPROVED BY ENGINEER INCHARGE

supply and fixing of cast iron light fitting of thr retail of the various portinon of light fitting are giving in the drawing the, the light fitting shall be convert by poli carbonet sheet and should suitable for twelv watt led make; dawarka casting or home deck aur equivalent ISO 9001-2008 company lamp - filips, vipro, helnonics_any other equivalent make will be approved by enginnering charge

supply of installation testing and commissioning of cast iron bollard 660mm lenght with poly carbonate sheet in upper part of the bollard surrounded as per design for light out put having a decorative base PVC piope for cable etc.by cement concrete of 1;3;6 ratios the cast iron material must follow make dwarka casting item code DBL-103-M-C or homodec or equilavent ISO 9001-2008 company (any other equivalent make will be approved by enginner in charge

prividing and fixing kerbstone with led lighting system as per following specification dimension with vertical mounting legs (2 nos) with horizentol square shape steel forcements 500mm*230mm*150mm dimensions visible after mounting 500mm*150mm*150mm as per IRC 86-1983 kerb angle - 45 degree with rubber plugs at both ends of the kerb stones (2 nos) load carring capacity vertical 1465kg horizontol 2349 CEOP certificate ingrace protection and connector rating IP67 electrical fixing FRP JUNCTION BOX CONSISTING OF 10 AMP SWITCH MODULE POWER SUPPLY (SMPS) input voltage 230v ac, output voltage 36 v 2 pole mcb for electrical fixing excavations of soft/hard rock and laying m15 in situ concrete with 3 year running and maintenance

SUPPLY,DELIVERY,INSTALLATION AND TESTING,COMMISSNING PAND FIXING OF MULTI PLAY STATION AREA : 5.48 x 3.04 Meter SAFE AREA : 6.50 x 4.00 Meter HEIGHT : 3.5 Meter PARTICULARS QTY TUBE SLIDE 10' 1NO. MULTI LANE SLIDE 10’1NO. 2 SEATER SWING 1 NO. GATE PANNEL 2 NOS. CROSS PANNEL 1 NO. FRP FLAG 1 NO. SQUARE DECK 1 NO FRP LADDER 1 NO. FRP BUTTERFLY 1 NO. CONE CANOPY 1 NO. 1. SQ. DECK 5’ HT: - The platform is made by fiber reinforced plastic. The top of platform is anti skid surface with multi colour pigmented resin .The back coat of fiber reinforced plastic is such that the mat strands are not visible the surface is tack free and FRP non skid lamination. Leg support pipe should be 80 mm IDGI PIPE with proper fitments. 2. Tube Slide 10’:- There is 1no. Of Tube slide of length 10’feet connected to the platform from one end. It should be made by fibre reinforce plastic having thickness 5mm overall & both side finish. made by special process of FRP like 1st layer of 450 GSM mat with reputed resin and gelcote reputed make only. 2nd layer of CSM mat 300 with ISO resin and self pigment for made slide paint free. And 3rd layer of 450 GSM gelcote, pigment reputed make only with gentle process in filling by feeler and sharp corner grinded by grinder and with wax polish on the sliding-surface. Total thickness 4-5 mm overall with smooth finishing and proper connected with platform with fitment. 3. Multi Lane Slide:- There is 2 nos. of FRP Slide should be made by Fibre Glass Reinforced Plastic having thickness 5mm overall Both side finish. made by special process of FRP like 1st layer of 450 GSM mat with reputed resin and gelcote reputed make only. 2nd layer of CSM mat 300 with ISO resin and self pigment for made slide paint free. And 3rd layer of 450 GSM gelcote, pigment reputed make only with gentle process in filling by feeler and sharp corner grinded by grinder and with wax polish on the sliding-surface. Total thickness 4-5 mm overall with smooth finishing and proper connected with platform with fitment. 4. Double Swing:- The leg support of this item are made up of 60 IDGI PIPE while the top bar is of 60 IDGI powder coated pipe. The two swing are made from 8 mm thick antiskid chequred reinforce rubber belt within suspended 9 MM rubber coated GI chain. The Ball bearing is mounted inside a specially designed nylon clamp. 5. Gate panel/Slide Entry: - FRP modular slide entry panel is providing at the top of the slide gate panel should be made up of FRP 3 to 4 mm thickness and must be both side finished. 6. Cross panel:- The cross panel should be made up of Fibreglass Reinforced Plastic by sandwich mould and must be both side finished with 3 to 4 mm FRP thickness. 7. Frp Ladder: - The ladder is made up of Fiberglass Reinforced Plastic with a conservative thickness of 5 to 6 mm. ladder should have reinforcement to maintain strength and avoid bending. The top surface of the ladder should be such that it should not deserve any kind of skiddy. 8. Frp Butterfly: - FRP butterfly is made up of in Fiberglas Reinforced Plastic 3 MM thick. 9. FRP FLAG :-The FRP Flag is made up from Fiber glass reinforced plastics. 10. Cone Canopy:- FRP cone Canopy Fitted on the top of the platform and made up of fiber glass reinforced plastic with 3 to 4 mm FRP thickness. All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C. base system as per order by engineer in charge Age capacity 3-12 Year.

PROVIDING AND FIXING INSTALLATION AND TESTING,COMMISSIONING OF ADVENTURE CLIMBER AREA : 3.9 x 2.13 Meter SAFE AREA : 4.9 x 3.00 Meter HEIGHT : 3.04 Meter Nylon Clamps : 7 Nos. Providing & fixing of Adventure climber multiplay having area of 3.9 meter x 2.13 meter & height of 3.04 meter from ground level. It should be stand with the help of vertical support 80mm NB pipes. Both the Platform are connected with the help of "S "bridge ladder should be made with 20mm NB & 25mm NB pipes. One end of "S"bridge is connected with the spiral climber should be made with 40mm NB pipe for its center support & 25mm NB pipe is used for its spiral . 1 No. of steel ladder in centre support should be made by 40mm NB & 25mm NB pipes. The 3 step oval shape ladder made by 32mm & 25mm NB pipes is used to climb from front. The crystal shape ladder should be made with 40mm & 20mm NB pipes to climb from another end. All the sharp edges and corner properly grinded to give Smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. Slide should be made in a single mould piece there is no any joint in the slide.FRP components should be paint by 3 layers of PU paint. And install by C.C. base system as per order by engineer in charge.

GIRAFFE WAVE SLIDE (3.7M)

SUPPLY DELIVERY INSTALLATION AND TESTING COMMISSIONING OF MARRY GO ROUND 4 SEATER AS PER SPECIFICATION DIA 1.2M HEIGHT : 1.0 METER Its total required area 1.2 Dia Mtr. Outer frame should be made by 25mm IDGI B Class pipe and handle should be made by 20mm IDGI B class Pipe connective with 50mm IDGI centre pipe. Sheet should be made by GI sheet 16 Gauge. Centre pipe connected with 2 No. of heavy duty boll bearing 6323 SKF. Total height 1.0mtr from ground level. Grouted in C.C. base system. All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C. base system as per order by engineer in charge Age capacity 3-8 Year. SUPPLY DELIVERY INSTALLATION AND TESTING COMMISSIONING OF ADVENTURE CLIMBER 4.8 MX 1.5 M AS PER SPECIFICATION AREA : 2.0 M X 0.5 M HEIGHT : 1.0 METER ACCESSORIES : 1 NO. GAZAN PIN Providing & fixing of Hopping See Saw Its Required 2.0 mtr x 0.5 mtr & height is 1.0 meter from ground level. The leg support should be made by 50mm NB Pipe & handle should be made by 25MM NB pipe. Handle railing & 2 inner frame support should be made by 25mm NB pipe. All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C. base system as per order by engineer in charge .

SUPPLY DELIVERY INSTALLATION AND TESTING COMMISSIONING OF MARRY GO ROUND 4 SEATER AS PER SPECIFICATION DIA 1.2M HEIGHT : 1.0 METER Its total required area 1.2 Dia Mtr. Outer frame should be made by 25mm IDGI B Class pipe and handle should be made by 20mm IDGI B class Pipe connective with 50mm IDGI centre pipe. Sheet should be made by GI sheet 16 Gauge. Centre pipe connected with 2 No. of heavy duty boll bearing 6323 SKF. Total height 1.0mtr from ground level. Grouted in C.C. base system. All the sharp edges and corner properly grinded to give smooth finishing so that children are not hurt with playing on it. The pure polyester powder coating (oven baked) done on the pipes extend the life of equipments. And install by C.C. base system as per order by engineer in charge Age capacity 3-8 Year.

SIDE PICNIC TABLE

PROVIDING AND SUPPPLYING DUSTBIN ACCORDING TO SPECIFICATION DRAWINGS AND DIRCTION OF ENGINEER INCHARGE.

AIR WALKER: SUPPLY FIXING & INSTALLATION

PARALLEL BARS: SUPPLY FIXING & INSTALLAT

FITNESS EXERCISING BARS: SUPPLY FIXING

Bidder Name

Amount

sanjay constructions(GSTN-23ADEFS6958C2Z0)

VIJAY JETHANI AND ASSOCIATES(GSTN-23ABYPJ6048A1ZO)

MANOJAVAYA BUILDCON(GSTN-23BGQPK4512E1ZN)

sanjay constructions

MANOJAVAYA BUILDCON

VIJAY JETHANI AND ASSOCIATES

MANOJAVAYA BUILDCON