COMPREHENSIVE REPAIR / MAINT OF LAUNDRY PLANT AND OT LIGHT FITTINGS AND CONNECTED WORKS AT MH SHILLONG UNDER GE SHILLONG.

Amount

Repair, maintenance and servicing of Washing Machine front loading 50 Kg Make-BTC and attending break down as and when required including dismantling and reassembling all dismantled parts, cleaning the sludge/ dirt/ Oil/ grease from machine, refilling with new oil and like consumable items, complete, all as specified and directed by Engr-in-Charge. Note : (i) Supply and fixing of the spare parts shall be measured and paid separately. (ii) The servicing of machine to be carried out by authorised dealer of BTC company and contractor's quoted rate shall be inclusive of the same. (iii) All defective spare parts shall be approved by Board of Officers conveyed by accepting officer for replacement.

All as per item no -1 but Steam Boiler automatic 700 kg/ Hrs- 02 Nos

All as per item no -1 but Hydro Extractor machine top loading 25 Kg- 02 Nos

All as per item no -1 but Drying tumber front loading 50 Kg- 02 Nos

All as per item no -1 but Slicing Machine 12 Kg- 02 Nos

All as per item no -1 but Calendaring machine double boiler 600 x 1830 mm steam heated- 01 Nos

All as per item no -1 but Air Compressor with flat Bed Press auto temp Controller 7.5 HP motor- 02 Nos

All as per item no -1 but Hand press heavy duty cap 1.2 KW 07 Kg- 03 Nos

Supply and fixing the following spare parts for laundry plant including taking down old unservicable one complete all as specified and directed: -

(a) Electric motor of cap 05 HP rewinding

(b) Ball bearing

(c) Contactors 25A, 415 Volts AC 3 50 Hz

(d) over load relay, 63 Amps 415 Volts

(e) Digital timer

(f) Temperature Indicator

(g) V- belt Size A-54- 02 Nos

(h) V- belt Size B-77- 02 Nos

(j) V - belt Size A - 99

(k ) V- belt size B- 84

(I) Plaster of paris

(m) Relay for panel

(n) Temperature controller for boiler

(o) Sole old valve

(p) Pump nozzle

(q) HT Electrode

(r) Flexible steam pipe3/4 " x 1/2"

(s) Hydro rubber bush 25 Kg

(t) Hydro gate rubber std size

(u) Washer Gate rubber std size

(v) Hudro brake as reqd at side

(w) bush for MS type

(x) Spring for brake 10 SWG

(y) Reversing timers

M&L for Painting to external surfaces of laundry plant comprising the machines mentioned at item no 9.01 to 9.24 above with two coats of synthetic enamel paint after preparation complete all as specified and directed by Engineer - in- charge.

M & L for Sub main wiring with four single core 6 Sqmm PVC insulated unsheathed cable multi- stranded copper conductor drawn through and including PVC conduit of size 25 mm dia with all fittings and fixing accessories on roof, walls, ceiling etc. including two single core 6.00sqmm PVC insulted unsheathed multi stranded copper conductor earth wire including taking down old one, complete, all as specified and directed. Note: Four run of single core cable and two run earth wire, PVC conduit will be measured as one length.

Supply and fix MCCB Distribution board, TP&N, vertical, double door, sheet steel, enclosure powder coated with 100 Amps rated bus bar with neutral link, 415 Volts, 4 way, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection including taking down old one complete all as specified and directed. Make: Havells / L&T Schnieder/ GE/ C&S.

Supply and fix MCCB, four pole, 415 Volt, 100 Amps, 25 kA rupturing, with sheet metal enclosure, including taking down old one, complete, all as specified and directed. Make: Havells/ L&T/ Schnieder/ GE/ C&S.

Supply and fix MCCB, four pole, 415 Volt, 40 to 63 Amps, 16 kA rupturing, with sheet metal enclosure, including taking down old one, complete, all as specified and directed. Make: Havells/ L&T/ Schnieder/ GE/ C&S.

Supply, install, testing and commissioning of outdoor LT distribution feeder pillar IP-65, CPRI approved of suitable size factory made totally enclosed dust and vermin proof, double leaf shutter in front and single leaf shutter in rear made out of 3.15 mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly painted with powder coated paint and aluminium bus bar 200 amps, 415 volts, 50 Hz 3 phase and 4 wire system with the following items connected as under including supplying and fixing on MS channel 75mm x 40mm x 5mm in PCC foundation and PCC work around the panel board within two feet area, complete, as specified and directed. INCOMING (a) MCCB 4 pole 315 Amps, 415 V, 35 KA-01 No (c) LCD multi-functioning meter-01 No (d) Phase indicator Lamps (RYB phases)-01 Set (Set of Three) LED Cluster type (e) CTs 100/5 amps-set of three (f) Aluminium bus bar 300 Amps-03 Nos and 150 Amp -01 No (g) Internal Wiring for panel incl insulators, sleeves etc OUTGOING (a) MCCB TPN 160 Amps, 415 V, 25 KA-02 Nos (a) MCCB TPN 100 Amps, 415 V, 25 KA-02 Nos (b) MCCB TPN 63 Amps, 415 V, 25 KA-02 Nos

Supply, install, testing and commissioning of outdoor LT distribution feeder pillar IP-65, CPRI approved of suitable size factory made totally enclosed dust and vermin proof, double leaf shutter in front and single leaf shutter in rear made out of 3.15 mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly painted with powder coated paint and aluminium bus bar 300 amps, 415 volts, 50 Hz 3 phase and 4 wire system with the following items connected as under including supplying and fixing on MS channel 75mm x 40mm x 5mm in PCC foundation and PCC work around the panel board within two feet area, complete, as specified and directed. INCOMING (a) MCCB 4 pole 250 Amps, 415 V, 35 KA-01 No (c) LCD multi-functioning meter-01 No (d) Phase indicator Lamps (RYB phases)-01 Set (Set of Three) LED Cluster type (e) CTs 100/5 amps-set of three (f) Aluminium bus bar 300 Amps-03 Nos and 150 Amp -01 No

Excavation in trenches in soft / loose soil n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out etc complete all as specified and directed by Engineer in Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in any type of soil etc complete all as specified and as directed by Engineer in Charge.

Removing excavated materials (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed by Engineer in Charge.

Supply lay/ spread in trenches, river sand, clean, including spreading, levelling, punning for laying/ cushioning of cables all as specified and as directed.

Supply lay in trenches fly ash bricks, old size sub class “B” for cable protection, complete, as directed by Engr-in-charge.

Supply, lay in trenches, floors, fix on wall/pole, passing through pipes etc., LT UG cable, 1100 volts grade, PVC/ XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs etc., of size 70 Sqmm, 4core, confirming to IS specifications, complete, all as specified and directed by Engr-in-charge.

M&L for testing and servicing calibration of full descaling (chemical wash) of Boiler tube for Boiler No. 1 & 2 and repair and make serviceable of spare part Burner, Pump, inspection, Fire kit, Water Pump, Temperature Controller & indicator lamp etc., including small spare parts or Boiler No. 1 & 2 with (Note: After completed of work calibration certification for Boiler Nos. 1 & 2 should be produce to department) including taking down old one, complete, all as specified and directed by Engr-in-charge.

Supplying, fixing, testing and commissioning of Shadow less LED light fittings 40 watt suitable for operation Theatre, ceiling mounted type, two no Domes, colour Temperature 3800-5200K, 220 Volts, 125000 Lux 10 to 15cm depth illumination with specially designed for the healthcare industry with latest technology, extreme effective advance features, excellent laminar flow, 5 memory special function, Spot Diameter- 100-150mm, LED Average Life greater than 5000, Diameter of Light 670 mm, intensity Control 10~100 Digital, shadow less operation light with long life with effective and superior technology suits for Operation Room with following features: (i) Light colour pattern Adjustment: The panel & remote is designed with graphical icons to allow user to quickly learn and easily operate. (ii) On/off finger touch switch (iii) Light intensity adjustment (iv) Light colour adjustment and including servicing of existing full light fittings, battery , charger etc. including taking down old one, complete, all as specified and directed. Make- M/S Jolly Technocrats or equivalent make of Philips/ Havells or Any Make approved by CEEC/ CEWC/ CESC/ CENC/ E-in-C valid till bid of Tender

Supplying and fixing sealed Lead - Acid battery 12 Volts, 65 Ah suitable shadow less LED light fitting with connected wiring including taking down old one, complete, all as specified and directed. Make: Exide Type EP 65-12 or equivalent make in Amaron/ Waxtron/ 2-Power/ M/s Instruments & Equipment Co

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing including taking down old one, complete, all as shown in Electrical Plate No 3 of SSR part -I.

Supply and fix MCCB four pole, 415 Volt, 200 Amps, 36 kA with sheet metal enclosure, including taking down old one, complete, all as specified and directed. Make: Havells/ L&T/ Schnieder/ GE/ C&S.

S&F in repair solar collector glass with 5mm thick toughened glass including taking down old one, complete, all as specified and directed by Engineer-in-Charge.

Supply and fix Gun metal gate valve with iron wheel head screwed both ends of size 40MM dia complete all as specified and directed by Engineer-inCharge.

Supply and fix Gun metal gate valve with iron wheel head screwed both ends of size 50MM dia complete all as specified and directed by Engineer-inCharge.

Supply and fix Gun metal gate valve with iron wheel head screwed both ends of size 75MM dia complete all as specified and directed by Engineer-inCharge.

M/S Mani Construction