PAINTING/ POLISHING AND REPAIR OF MISC FURNITURE ITEMS AT BABINA CANTT

Amount

Material and labour for preparation of old existing polished surfaces of Peg Table (FD-25(M)/ 277/384) by scrapping and rubbing down by emery paper including removing oily spots, ink dots , filling the cracks and pores with paste and putty and polishing with sprit polish Numbers of coats (as per IS code) for glossy finish is achieved to the entire satisfaction of Engr-in-charge. The tint of polish shall be exactly same as of existing polish colour of furniture or as approved by Engr-in-charge.

As as per item No. 1 above but on Chair writing / CBA (FD 20,280)

As as per item No. 1 above but on Hat stand with mirror (FD -233)

As as per item No. 1 above but on Chair wooden Bottom (FD 225/285)

As as per item No. 1 above but on Chair dining (FD 228,279)

As as per item No. 1 above but on Table office Officer (W) (Internal/external) (DB)

As as per item No. 1 above but on Table writing (Internal/external) (FD33/275)

As as per item No. 1 above but on Chair dining Offrs (FDMAP-II/02)

As as per item No. 1 above but on Chair Easy (FD 17,229)

As as per item No. 1 above but on Sofa set 5 seater (FD-258)

As as per item No. 1 above but on Sofa set 5 seater (FD/MAP-II/02)

As as per item No. 1 above but on Stool dressing (FD-27/374)

As as per item No. 1 above but on Side Board (Internal/external) FD-241)

As as per item No. 1 above but on Sofa set 5 seater (FD-281/373)

As as per item No. 1 above but on Table 3’x2’ W/O drawer (FD-231)

As as per item No. 1 above but on Table 3’x3’ (FD-88/291)

As as per item No. 1 above but on Table dining 6 pers (FD-30/239)

As as per item No. 1 above but on Table dining 8 pers (FD-276/376)

As as per item No. 1 above but on Table dressing gents (Internal/external) (FD-31/230)

As as per item No. 1 above but on Almirah mess utensil (Internal/external) (FD-93(M)

As as per item No. 1 above but on Teapoy (FD-34(M)/232)

As as per item No. 1 above but on Table 3’x2’ with drawer (FD-283)

As as per item No. 1 above but on Bed plywood top (FD 21 ,245, 246,247)

As as per item No. 1 above but on Chair dining JCOs/OR (FD/MAP-II/05)

As as per item No. 1 above but on Table bed side (Internal/external) (FD-210)

As as per item No. 1 above but on Table Centre (FD-235/274)

As as per item No. 1 above but on Table dressing ladies with stool (Internal/external) (FD/MAP-II/07)

As as per item No. 1 above but on Table office clerk (W) (Internal/external) (DB)

As as per item No. 1 above but on Table dressing ladies (Internal/external) (FD-378)

M&L for preparation of old existing painted surfaces of steel furniture Almirah large steel 1/2H x1/2S (Internal/external) (FD-1033) by scrapping the old and finish and rectifying dents and making them smooth by applying putty upto the required level and again smoothening the complete surfaces with sand paper and and applying one coat of primer wherever required and finally spray painting with synthetic enamel paint tint as per existing (OG /Olive Green/White) of approved quality and shade upto the entire satisfaction of Engr-in-charge.

As per item No.30 above but on Bed hard steel (FD/E6/MAP/08)

As per item No.30 above but on Book shelf open large Steel (FD-69)

As per item No.30 above but on Almirah Large steel Glazed (Internal/external) (FD-104(M)

As per item No.30 above but on Almirah Med steel Glazed (Internal/external) (FD-104(M)

As per item No.30 above but on Charpoy MS Tube with ply (TP)

As per item No.30 above but on Charpoy IP hard top (FD/MAP-II/02)

As per item No.30 above but on Almirah large steel 1/2H x1/2S (Internal/external) (FD/E6/MAP/18)

As per item No.30 above but on Almirah medium steel all type (Internal/external) (FD-67/1032)

As per item No.30 above but on Table office clerk steel (Internal/external) (FD-84/1002/1003)

As per item No.30 above but on Table office Offrs steel (Internal/external) (FD-84/1002)

As per item No.30 above but on Chair Verandah (FD/E6/MAP-II/06 &15)

As per item No.30 above but on Chair verandah (FD-256)

As per item No.30 above but on Bunks with matress and Drawer with box (Internal/external) (TP)

As per item No.30 above but on Chair CB Steel with Arm (FD-75)

As per item No.30 above but on Almirah large steel with shelves (Internal/external) (FD-1031)

As per item No.30 above but on Locker steel (Internal/external) (TD-645)

As per item No.30 above but on Table 3'x2’ W/O drawer steel(FD-1007)

As per item No.30 above but on Chair writing Offrs (FD/E6/MAP/12)

As per item No.30 above but on Table 3'x2’ with drawer steel (Internal/external) (FD-1008)

As per item No.30 above but on Table 3'x3' steel (FD-1009)

As per item No.30 above but on Ladder for loft (FD-238)

As per item No.30 above but on Locker bed side steel (Internal/external) (FD-257/1029)

As per item No.30 above but on Teapoy verandah (FD-255)

As per item No.30 above but on Locker steel dauble door (Internal/external) (TP)

As per item No.30 above but on Table dining OR's (FD-165)

CHARPOY GI PIPE (FD-220) :- M & L for removing of old unserviceable nylon newar from charpoy GI pipe including material & labour for conversion into Charpoy GI plywood top by providing plywood commericial 12mm thick BWR grade ISI marked Make- Greenply/Centaury Plywood/Mysorechip board including two nos MS flat iron size 900x40x5mm fixed with four nos carriage bolts with nuts and washer to the both side of long rails, Plywood shall be fixed on the top of charpoy frame with total 08 Nos carriage bolts with nut and washer including flat iron bolt, 50mm long and 6mm dia by providing suitable holes in the GI pipe . Edges of the plywood shall be rounded and smoothed by applying emery paper. Frame of charpoy shall be fully screwed /replaced the unserviceable parts before fixing the ply top . Rest all as per drawing and directed by Engineer-in-charge

CHARPOY GI PIPE (FD-220) : Long rail : Re- threading and fixing with elbow after removing and cutting the long rail wherever required all as shown on drg and as directed . Threading shall be done 22mm long at one end and 52mm long at other side and re-assembling of GI charpoy as per drg and as directed by Engr-in-charge

CHARPOY GI PIPE (FD-220) : Short rail : Re- threading and fixing with elbow after removing and cutting the short rail wherever required all as shown on drg and as directed . Threading shall be done 22mm long at each side and re-assembling of GI charpoy as per drg and as directed by Engr-in-charge

CHARPOY GI PIPE (FD-220) : Leg : Re- threading and fixing with elbow after removing and cutting the leg wherever required all as shown on drg and as directed . Threading shall be done 22mm long at one end and re-assembling of GI charpoy as per drg and as directed by Engr-in-charge

CHARPOY GI PIPE (FD-220) : Replacement of long rail of charpoys GI pipe wherever required with new long rail made out of 32mm dia GI pipe med grade confirming to IS :1239 Part-I Make- Tata/Surya/ Prakash of length 1.9 mtrs duly threaded one side upto 22mm long at end and other side to 52mm long at end and re-assembling of GI charpoys after replacement of UNSV long rail as directed by Engr-in-Charge. Note ;- 1. The items includes threading both sides in new long rail also. 2. Old unserviceable long rail obtained shall be reused in Item No 61 below.

CHARPOY GI PIPE (FD-220) : Converting long rail into short rail (Obtain from item Sl No 60 above) here-in-before and fixed to Charpoy GI pipe duly threaded 22mm long both side end as directed by Engr-in-Charge.

CHARPOY GI PIPE (FD-220) : Converting short rail into leg (obtain from Sl No 61) here-in-before and fixed complete to Charpoy GI pipe duly threaded 22mm long of the leg as directed by Engr-in-Charge.

CHARPOY GI PIPE (FD-220) : M & L for replacement of GI elbow three way of size 32mm bore with new ISI mark GI elbow (wt not less than 420 gms each) & re-assembling of GI charpoys after replacement of broken elbow complete all as specified and directed by Engr-in-Charge.

CHARPOY GI PIPE (FD-220) : M & L for replacement of broken GI check nuts of size 32mm bore with new check nuts of approved quality complete all as specifed and directed by Engr-in-Charge.

CHARPOY GI PIPE (FD-220) : MS sheet :M & L for replacement of 3mm thick MS sheet by welding to bottom of GI legs as directed by Engr-in-Charge.

CHARPOY GI PIPE (FD-220) : M & L for replacement of broken MS clamps FI 25mmx3mm made to shape & welded with legs duly painted with black paint all as directed.

HINDUSTAN ENGINEERING WORKS

M/S JAI BALAJI TRADERS