Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.4 LAccepted-AOC NO 9 6 203 1 G2 DURGA BHAVANI NAGAR CHAMPAPET HYDERABAD 500059 | HYDERABAD | TELANGANA | 500059 | L1 | Accepted-AOC lowest | |
| 2 | L2₹49.9 L+₹42,300 (0.85%)Rejected-Finance | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹50.0 L+₹50,302 (1.02%)Rejected-Finance 94A APR COLONY BILHARI JABALPUR MP | JABALPUR | MADHYA PRADESH | 482020 | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹50.4 L+₹91,709 (1.85%)Rejected-Finance | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹51.0 L+₹1.5 L (3.10%)Rejected-Finance | L5 | Rejected-Finance Not lowest |
Tender Value
₹48.4 L
EMD Value
₹96,800
Closing Date
11 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
PROVISION OF INTEGRATON AND TEST FACILITY FOR VEHICLE MOUNTED LASER ORDINANCE DISPOSAL SYSTEM MARK I (LORDS MK I) AT CHESS LASER COMPLEX, KANCHANBAGH, HYDERABAD.
2023_MES_619867_1
GE I KBAGH TOKEN 75 OF 2023 2024
Open Tender
Civil Works
Item Rate
240 days
GE I R and D Kanchanbagh
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹96,800
Yes
26 Dec 2023
21 Sept 2023
13 Oct 2023
21 Sept 2023
11 Oct 2023
5 Oct 2023
21 Sept 2023 - 28 Sept 2023
Amount
BUILDING:
Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including getting out and disposal of excavated earth up to 50m and lift up to 1.5 m as directed by Engr -in- charge All kind of soil
Excavation work in ordinary soil by mechanical means ( hydraulic excavator) / manual means in foundation trenches or drains ( not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottom lift up to 1.5m including getting out the excavated soil and disposal of surplus excavated soils as directed within a lead of 50 mtr
Providing and laying PCC 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size derived from natural sources) in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolanna / Ordinary Portland / portland slag cement admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete , to improve durability and workability without impairing strength including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engr-in- Charge for the following graded or concrete all works up to plinth level . (i) Concrete of M-25 grade with minimum cement content of 330 Kg/ Cum for foundation, plinth level
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolanna / Ordinary Portland / portland slag cement admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete , to improve durability and workability without impairing strength including pumping of concrete to site of laying, curing, carriage for all leads, but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engr-in- Charge for the following graded or concrete all works above plinth level up to floor V level. Concrete of M-25 grade with minimum cement content of 330 Kg/ Cum for beam, lintel and slab
Centering and shuttering including strutting, propping etc and removal of form for Foundations, fitting, bases of columns etc
All as per item No.6 above, but Lintels, beams, plinth beams, girders, resumes and cantilever
All as per item No.6 above, but Columns, pillars, piers, Abutments, post and struts
All as per item No.6 above, but suspended floors, roof, landing, balconies and access platforms
Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete up to plinth level :- Thermo - Mechanically Treated bars of grade Fe- 500D or more
Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level :- Thermo - Mechanically Treated bars of grade Fe- 500D or more
Steel reinforcement for RCC work ready to use "cut and bend" rears of approved make from factory / workshop to construction site including placing in position and binding all complete above plinth level . Thermo / Mechanically Treated bars of grade Fe- 500D or more
Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:4 complete
15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and finished the surface fair and even without using extra cement complete .
15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces and finished the surface fair and even without using extra cement complete .
6mm thick cement plaster 1:3 ( 1 cement : 3 fine sand) on ceiling surface finished with a floating coat of neat cement and thick coat of lime wash on top of ceiling when dry for bearing of RCC slabs and beams
Distempering Two or more coats on new work with Ist quality acrylic distemper , having VOC ( Volatile Organic Compound) content less than 50 grams / liter of approved brand and manufacture of required shade and colour complete as per manufacturer's specification
Finishing wall New work ( Two or more coats applied @ 1.43 liter/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 liter / 10 Sqm with 100 % premium acrylic emulsion paint having VOC less than 50 gm/ liter and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted ) with silicon additives
White washing on new work ( three or more coats) with lime to give an even shade
Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling CP brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engr -in- Charge. (Glazing, paneling and dash fasteners to be paid for separately) :- For fixed portion powder coated aluminum ( minimum thickness of powder coating 50 micron)
For shutters of doors, windows & ventilators powder coated aluminum (minimum thickness of powder coating 50 micron) including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required ( Fittings shall be paid for separately)
Providing and fixing anodised aluminum grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design / pattern with approved standard section and fixed to the existing windows frame with CP bars / stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminum standard section around the opening all complete as per direction of Engr -in- Charge
Proving and fixing glazing in aluminum door, window, ventilator shutters and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawings and the directions of Engineer-in-charge:- (i) With float glass panes of 5mm thickness ( weight not less than 12.50 Kg/ Sqm)
Supplying and fixing rolling shutters 80x1.25 mm M.S. laths with 1.25 mm thick top cover of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
Extra for providing mechanical device chain and crank operation for operating rolling shutters Exceeding 10.00 sqm and up to 16.80 sqm in the area
Steel work in built up tubular hot finished welded type tubes ( round, square or rectangular hollow tubes etc) trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc complete
Providing and fixing steel work in gratings, frames, guard bars, ladders, railing, brackets, purling, gates and similar works welded in built up sections / frames work, including cutting, hoisting, fixing in position and applying priming coat of approved steel primer using structural steel as required
Providing and fixing 0.56mm aluminuim color coated profile with centre to centre pitch of 175mm , depth of 46mm, top crest width of 41mm, bottom valley width of 80mm overall profile width of 1144, cover width 1050mm at all height, levels and locations colour finish aluminum alloy roofing sheets of alloy IS designation 31500, temper H x8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance.
Providing and fixing of percolated / mill finish aluminum ridges plain ( 500 -600mm) pre- coated colour or mill finish aluminum roofing accessories in 0.71mm thickness , alloy 31500 (IS designation) (Aluminium alloy (AA) 3004 (ISO designation) for colour coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15- 18 microns using self drilling/ tapping SS screws of size 6 x 50mm with washer complete
Providing and laying ceramic glazed floor tiles of size 300 x 300 mm or more ( thickness to be specified by the manufacturer) of !st quality conforming to IS : 15622 of approved make in colours and shade except white ivory, Grey, fume Red Brown, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 Coarse sand) , jointing with grey cement slurry @ 3.3 Kg/ Sqm including pointing the joints with white cement and matching pigment etc complete
Making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources) of 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand , including necessary excavation, leveling & dressing & finishing the top smooth.
Returning filling in trenches incl spreading,levelling , watering& well ramming in layers n.exc 25 CM thick
Supplying and filling in plinth / under floor with sand under floors including watering, ramming, consolidating and dressing complete
Supplying , filling, spreading and spreading hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface.
Disposal of building rubbish / melba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer -in- charge beyond 50m initial lead for all leads including all lifts involved.
Providing and fixing aluminiuim extruded section body universal type hydraulic door closer ( having brand logo with ISI , Is : 3564, embosed on the body, door weight up to 36 to 80 kg and door width from 701 to 1000mm) with double speed adjustable with necessary accessories and screws etc complete
Providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality) for aluminum door including necessary cutting and making good etc complete
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level :- (i) PCC 1:4:8 ( 1 cement : 4 manufacutred sand derived from Recycled concrete aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size recycled aggregate (RA).
PCC 1:2:4 ( 1 cement : 2 manufacutred sand derived from Recycled concrete aggregate (RCA) up to 25 % : 4 graded stone aggregate 20 mm nominal size recycled concrete aggregate (RCA) up to 25 %)
Providing and fixing 12.5mm thick tapered edge Glass reinforced Gypsum board conforming to IS : 2095 (Part 3) : 1996 false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from MS sheet and galvanised with zinc coating of 120gms/ sqm ( both side inclusive ) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm at 1200mm centre to centre, one flanges fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x 10 x,50mm of required length with nut & bolts of required size , Gypsum board of 12.5mm thick with white paper layer on face side of size 600 x 600 mm as directed
Forming groove 10 mm wide and 5 mm deep of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :
Excavation work in ordinary soil by mechanical means ( hydraulic excavator) / manual means in foundation trenches or drains ( not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottom lift exceeding 1.5m up to 3.0m depth including getting out the excavated soil and disposal of surplus excavated soils as directed within a lead of 50 mtr
Providing and laying cement concrete, 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing,
INTERNAL ELECTRIC SUPLLY:-
Material and labour for point wiring complete with ISI marked 1.5 Sqmm PVC insulated unsheathed multistranded single core cable with copper conductor (FRLS) 1100 volts grade drawn through and including PVC rigid conduit 20 mm or higher dia ISI marked as required at site including conduit accessories such as Junction Boxes, Inspection Covers etc, concealed/surface type on stone/brick masonry walls, roofs, floors etc by means of saddles and clamps etc including PVC gang boxes as required at site for concealed/surface conduit wiring and modular plates & covers as required at site for housing switches sockets, regulators etc. including providing of 1.5 Sqmm PVC insulated multistranded unsheathed FRLS copper conductor as earth continuity conductor and connecting to common earth dolly all as specified for and connecting up complete for the following:-
One light point controlled by one way modular switch 6 amps
One ceiling fan point / Exh fan pont controlled by one 6 Amps one way switch and regulator
One 3 pin 6 amps switch socket outlet point on independent board.
One 3 pin socket outlet 6 Amps on the same board with other switches.
M&L for point wiring complete with 4 Sqmm PVC insulated unsheathed single core multi stranded copper conductor 1100 V grade drawn through in and including 20 mm dia PVC conduit concealed on walls/ in existing Conduit on Ceiling and Terminated to sunken box of modular type including white cover plates suitable for fixing switches, sockets etc including 4 Sqmm PVC insulated Copper conductor cable as earth continuity conductor and connecting to common earth dolly and taking down old one complete all as specified and directed for 3 in one 3 pin socket outlet. 15 amps, independent:- Make For Copper wire : Finolex/Havells/Gloster/KEI. For PVC conduit : Polyplast/ GM/Mode/Finolex/Plaza NOTE : The Contractor is responsible for arranging all tools required at site.
S&F Rigid non metallic PVC conduit, 20mm external dia, exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, locknut, saddles, pipe hooks etc, complete.
S&F modular switch one way 6 Amps 1 module, 230 V, 50 Hz complete
S&F modular switch one way 16 Amps 1 module, 230 V, 50 Hz complete
S&F modular fan step type regulator, 120V two module, 230V, 50Hz complete.
S&F modular socket outlet 6 Amps 230V AC 3 pin multipurpose type complete
S&F modular socket outlet 6/16 Amps, 230 Volts, 50Hz multipurpose complete
S&F ceiling rose two to three terminal surface backalite surface type AC 50Hz 230 Volts complete.
S&F in replacement indoor industrial type surface/wall mounted LED integral batten 20W, 6500K CCT, aluminum extruded body and polycarbonate diffuser, <10%THD, integral electronic driver complete fixing with all accessories prewired and including connecting up with two core flexible copper conductor cable with suitable size complete all as specified and directed. Make : Havells Cat part:LUMILINE+BS20WLED865SPCSS or equivalent in Philips/Jaguar/Shakthi/ Polycab
S&F in replacement indoor industrial type surface/wall mounted LED integral batten 10W, 6500K CCT, aluminum extruded body and polycarbonate diffuser, <10%THD, integral electronic driver complete fixing with all accessories prewired and including connecting up with two core flexible copper conductor cable with suitable size complete all as specified and directed. Make : Havells Cat part:LUMILINE+BS10WLED865SPCS or equivalent in Philips/Jaguar/Shakthi/ Polycab
S&F linear LED high bay with IP66 type protection, 150W, 230V not less than 5700,130 Lm/W, 50Hz and housing epoxy powder coated dia casted aluminum housing with bright anodised reflector, with additional safety chain and enclosed with heat resistant and toughened glass front visor including driver suitable for 140-270V AC, fixing on pole/wall/bldg channel (including adjustment for up or down in pole or wall) side mounting suitable for 40-60 mm OD pipe and proven of 3 core PVC insulated PVC sheathed copper conductor multistranded wire up to fitting complete. Make-Crompton cat part no LHB11-150-CDL/60-HPM or equivalent in Havells/Philips/polycab
S&F1x30W LED road way lighting luminaries with Pressure die-cast powder coated LED street light toughened glass suitable for Building light clear acrylic cover and complete accessories including Driver with suitable connection Lens embedded pc cover having bottom opening separate driver compartment with IP 66 protection and impact resistance of IK08 complete all as specified and directed. MAKE: Havells cat part no ENDURASUNDOWNSL25WLED765PASYBOTGIHD or equivalent in Philips/Wipro/ Shakhti/ Polycab
S&F Single pole and neutral enclosure with two pin and earth plug and socket complete with on double pole MCB 20Amp ,240V complete all as specified and directed.( for A/C Point )
S&F MCB SP 6 to 32 Amps, 'C'curve, working on 240V ,50Hz, 10KA breaking capacity including electrical connection with the help of lugs/thimbles , complete all as specified and directed.
S&FMCB SPN 40 Amps, 'C'curve, working on 240V ,50Hz, 10KA breaking capacity including electrical connection with the help of lugs/thimbles , complete all as specified and directed.
S&F sheet metal enclosure MCCB DB VTPN double door type AC 240V 6 way with 250 Amps rated bus bar, vertical complete including incoming MCCB & outgoing MCBs all as directed. Make :-Havells cat part no DOUBLE DOOR DHDLVDRWAFO08 or equivalent in LEGRAND/SIEMENS
Earthing complete with GI earth plate electrode 600mm x 600mm x 6.0mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth 4mm , GI earth wire shall be protected by 15mm dia GI pipe 'medium grade', watering pipe 20mm dia GI pipe 'light grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate up to a thickness of 150mm, filling of black cotton soil in earth pit up to GL, and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 50mm thick RCC cover (1:2:4) type B1 mix with 8mm dia nominal reinforcement @ 75mm c/c both ways etc complete all as shown in electrical plate No.3 connected to earthling test point, including testing on completion, complete all as specified and as directed. NOTE:-1 Rate quoted shall be deemed to include cost of excavation in any type of strata, RFR and removal up to 50metre, PCC pit, funnel and RCC cover plate. 2. GI wire above 7.5m will be measured and paid separately
Earth continuity conductor or main earthling lead fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthling etc as required GI wire 4 mm as earthling lead.
Supply & fixing of light duty exhaust fan,A.C, single phase,50Hz, 230/240 V of size 300 mm sweep, with minimum 900 rpm with louvres, and wire mesh for suitable size to be fixed before fixing of louvers, including making circular hole on a wall suitable for the exhaust fan & making good the destructed surface including two coats of paint to match the wall shade. necessary wiring along with necessary accessories etc, complete all as specified and directed . Make: Havells/CG/Almoner
Supply and fixing of Energy efficient 5 Star Rating, dust proof, ISI Marked, Ceiling Fan 1200 mm Sweep size, white/ivory color, copper winding with minimum air delivery of 230 cu.mtr/min,A.C, single phase, motor with decorative ring, twisted wire, 230 volt 50 Hz including canopy set , flexible copper conductor fixing with necessary lugs, including necessary hook, rubber bush & safety pin shackle assembly all necessary accessories marking MES no on fan motor complete all as directed by Engr-in-charge. Make: CG/Havells/Almonard
Supply & Fixing Air circulator wall fans 230 Volts single phase oscillating 450 sweep suitable for wall mounting ,oscillation up to 90º and metal body powder coated with all fixing arrangements to fix on wall, including provision copper bunched flexible three core 1.5sq.mm PVC insulated cable from ceiling rose to fan including marking MES Number on fan motor complete all as specified and directed. Make: CG/Havells/Almonard
S&F Triple pole and neutral enclosure with three pin and earth plug and socket complete with including triple pole MCB 32Amp ,240V complete all as specified and directed. Make-Havells cat part no DHPDBEN032 or equivalent in legrand/Siemens
M&L for Sub main wiring complete with 4 runs of single core 10 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of non-metallic rigid PVC conduit 32mm dia and its accessories on the surface of and connecting terminal ends to DB's including providing 2 runs of single core 10sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, including taking down old sub main wiring of any type and any size and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Four runs of 10 sq.mm copper conductor, Two runs of 10 sq.mm copper earth continuity conductor and one run of PVC conduit shall be measured as one unit length. (ii)The rate quoted per unit shall be deemed to be inclusive of the extra length of cable /wire required for connection to MCBs .
EXTERNAL ELECTRIFICATION:-
M&L for XLPE insulated , armoured heavy duty electric cable with aluminum conductor , 1100 volts grade of cross- sectional area 50 sq mm 3.5 core complete all as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick using soil complete all as directed.
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed.
Supply and spreading of dry clean natural river sand in trenches/ transformer yard / two pole structure yard for cable protection complete all as directed. Note:- Punned thickness only shall be measured for payment purpose.
M&L for laying common burnt bricks, sub class 'B', of size 230 x 115 x 75 mm in trenches for cable protection complete all as directed.
M & L Galvanised iron tubing 80 mm dia light grade laid in trenches/floors/walls for earth lead protection and cables at road crossing etc complete all as specified and directed.
EXTERNAL WATER SUPPLY:-
Cutting to existing steel tubing for alterations up to 50mm GI tubing including reducers required at site complete making good the surfaces.
Pipes galvanized, “Medium class”, supplied And laid complete including fittings 25 mm (1") dia.
S&F Cast copper alloy Stop Valve, 25 mm size screwed down, high pressure, with butterfly handle screwed both end for iron pipe.
Supply and install inverter type hi wall split AC units indoor & outdoor complete with cordless remote control unit, rotary type and with in built air ionizer and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR ,stabilizer free operation with and including MS wall mounted bracket, copper pipe of 9 RM ,PVC drain pipe of 6 RM & connecting cable 6 RM including installation all as specified and required at site requirement. Make :- Lloyd 1.5 Ton 5 star inverter GLS18I5FWGEV or equivalent in Voltage/LG/Samsung/Blue Star
BHAGYARAM ENTERPRISES
Ravi Enterprises
Venkat Sai Enterprises
SRI SAI ENTERPRISES
SUN LIGHT HOUSE
MOHAMMED GHOUSE
CHARAN ELECTRICALS
Anjana corporation
ELEVATORS MAINTENANCE ENGINEER WORKS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .