Replacement of old existing Ductable, Split and Window AC Systems in FCI ZO(N) building Noida.

Amount

SITC of Air-cooled Inverter Ductable AC unit comprising of Inverter driven compressor. The indoor unit shall be of ductable type complete with DX coil, filters, blower section with motors & drive refrigerant piping, thermostatic expansion valve distributor, starter and other necessary controls. Each indooor unit shall be connected to separate outdoor unit (1:1), which shall have condenser coil, fans with motors and drive, single inverter compressor, factory pre-charged with Refrigerant gas, oil and factory fitted units shall have inbuilt factory fabricated electrical panel & scanner for electrical safety features like, phase reversal & sequencing, under & over voltage, phase loss, over current etc. All items should be encased in enamel painted anti corrosive, sheet metal cabinet. The units shall be of capacities not less than specified as below:

SITC of following capacities Inverter Air Conditioner High-wall split unit with Cordless control unit with Inverter driven compressor factory pre-charged with R-32 refrigerant gas. The unit prices shall be inclusive of 5m refrigerant piping duly insulated both ways having 5.0 BEE Rating.

SITC of following capacities Air Conditioner Window unit with Cordless control unit with Inverter driven compressor factory pre-charged with R-32 refrigerant gas having 5.0 BEE Rating.

SITC of following capacities voltage stablizer for AC i/c connections etc. as required.

S/F of insulated PVC drainpiping with fittings/ accessories of required diameter for indoor unit.

S/F signal control wire for ACs in flexible pipe on wall surface i/c connections etc. as required.

S/F of required size refrigerant Copper piping duly insulated additional quantity other than slandered quantity mentioned under item no. 1 and 2 to interconnect the indoor and outdoor unit of each ductable split/ non-ductable split unit (the additional pipe rates shall be for both pipeline).

For Hi-wall AC unit (1.5 TR/ 2 TR)

For Ductable AC unit (5.8 TR)

S/F of duct lining of GSS duct from inside with 25 mm thick fibre glass covered as per standard specifications of acoustic and thermal insulation.

P/F Canvas connection to remove the vibration between duct and air conditioner.

Dismantling the unserviceable air conditioner units along with accessories and shifting to basement/ Ground floor as required.

Modification and repair of existing sheet metal ducting/ dampers/ plenums in the main hall & halls on both sides on each floor.

S/F supporting arrangement of MS Angle Iron frame of suitable strength and size for the Outdoor units of ductable split units at the location as per ther requirement of client.

for ductable unit

for high-wall unit

Credit for the following old & unserviceable items of AC system

11.6 TR Ductable AC unit

5.8 TR Ductable AC unit

1.5 TR Split AC unit

2.0 TR AC unit

3.0 TR AC unit

1.0 TR Window AC unit

Iron items (Scrap)

Copper items (Scrap)