SPEICIAL REPAIR TO RD IN DHAN SINGH ENCLAVE ALONGWITH FOOTPATH FROM FROM GATE OF DHAN SINGH ENCLAVE TO SHOPING COMPLEX AND ARUMUGHAM ENCLAVE UNDER GE I GOS

Amount

M&L for Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, and making good by applying tack coat @ 5 Kgs per 10 Sqm and laying premixed bituminious macadam well rammed and sealed with paving bitumen 60/70 or VG-30 grade@ 9.8 Kgs per 10 Sqm, blinded with 0.09 Cum of stone chipping of size 6.3mm and again well rolled with 8 to 10 tonne power roller (Iincluding supply of pre-mixed macadam, binder and chipping) depth of pot holes exc 30mm complete all as specified and directed by Engineer-in-Charge.

M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm & depth exc 50 mm & n exc 100 mm. Complete all as specified and directed by Engineer-in-Charge.

M&L for 150 mm thick water bound macadam in two layers of 75 mm each (compacted thickness), with coarse aggregate of stone (granite / trap/ basalt) of grading 2 (63 mm to 40 mm size) or of grading 3 (50 mm to 20 mm size), spread, rolled and consolidated to required gradient and camber required ,complete all as specified & directed.

M&L for preparing un-surfaced water bound macadam by brushing with wire brushes for removing caked mud etc sweeping with brooms & finally fanning the cleaned surface with gunny bags to remove all loose dirt etc, providing evenly a tack coat of bitumen at the rate 10 kg per ten Sqm & providing Bituminous premix semi-dense asphaltic concrete 40 mm consolidated thickness with 5.50% binder content by weight of total mix, rolled & compacted to required camber & gradient , complete all as specified & directed.. (Mix shall be obtained from HOT MIX PLANT and spreading shall be done with MECHANICAL PAVER).

M&L for Preparing existing black top surface or bituminous macadam surfaces by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top/concrete surfaces than applying evenly priming tack coat with paving bitumen 60/70 or VG-30 penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface area , complete all as specified & directed.

M&L for applying bituminous premixed semi dense asphaltic concrete 40mm thick (consolidated thickness) with 5.5% binder content of paving bitumen 60/70 or VG-30 grade by weight of total mix including cement filler, on surfaces rolled & compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechanical paver finisher. Complete all as specified and directed by the Engineer-in-charge.

M&L for premixed bituminous macadam laid, rolled and compacted to required gradient and camber n.exc 75mm thickness (consolidated thickness) with 4% binder content of VG -30 by weight of total mix, mixed in hot mix plant and laid by mechnical paver finished , complete all as specified & directed.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign matters etc to receive the marking and M&L for thermo plastic (Reflective) line marking having 1.0 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed. Note - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

S&F in repair cat eyes/road studs for roadways sign permanent surface mounted type having tough poly carbonate micro replicated corner cube reflector lenses with a protective abrassion resistant ceramor coating having body of weather proof and impect resistant thermoplasit complete as per manufacturer's instruction , complete all as specified & directed.

S&F in repair solar cat eyes/road studs size (mm) 125L x 125B x 25H including stem height 53mm approx housing dia cast aluminium (grade LM-6) fully water proof and weather proof and weatherproof coating visible distance upto 400mtr LED-6 super bright amber led (3 Nos each side) yellow charged, flush frequency 1.2 Hz-1.8Hz including solar panel 3.5V/110MA & battery one PC sub ‘C’ type Ni-Cd rechargeable battery 1.2V/2.5AH temp range 20C to 70C fixed on road for roadway sign complete as per manufacturer’s instruction , complete all as specified and directed.

S&F in repair plastic speed bumbs (Speed breakers) not less 400 mm wide blocks & yellow colours fixed with necessary spikes/screws to the road surface etc. , complete all as specified and directed.

S&F in repair ABS Body, 100 cm outdoor convex mirror good quality as approved by GE fixed in road/ground portion complete including hanging/fixing arrangement with adequate mounting arrangement at suitable height, having unbreakable Polycarbonate Convex Lens with hoods as the traffic safety mirror for eliminating blind spots & increase visibility at a broader angle, including excavation for post holes, PCC Type C-2 1:3:6 (using 40 mm graded stone aggregate) in post hole & removal of surplus excavated material to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point , complete all as specified and directed.

Surface excavation not exc 30CM deep and averaging 15CM deep and getting out in soils , complete all as specified and directed.

M&L hard core of gauge 63mm but n.exc 100mm deposited spread and levelled in layers not exc 15cm thick watered and rolled/rammed to a true surface of broken stone or boulders , complete all as specified and directed.

Sand filling under floors are in foundation including watering and consolidation , complete all as specified and directed.

M&L 75mm thick cement concrete type B2, PCC 1:3:6 (40mm graded crushed stone agg) as in path/hardstanding , complete all as specified and directed.

M&L PCC 1:2:4 Type B1 with metallic hardener (20mm graded agg) as in copings,kerbs and like incl weathering slightly rounded or chamfered angles without extra cement for smooth finish, complete all as specified and directed.

M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc , complete all as specified and directed.

M& L rolling in formation ground with manual roller / table vibrator , complete all as specified and directed.

M&L machine pressed pre-cast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and no pigments , complete all as specified and directed.

HARAGOURI SUPPLIERS (BID ID -3487583)

M/S JAGANNATH SASMAL (BID ID -3488941)

M/s Ats Electricals (BID ID -3489988)

R K Traders (BID ID -3488727)

M/S SIWALIK AND CO (BID ID -3489010)

M/s MAA BHAIRABI ENTERPRISES (BID ID -3488090)

DHABALESWAR ENGINEERING WORKS (BID ID -3489162)