PROVN OF TOILET BLOCK FOR OFFRS AND PROVN OF SEATING ARRANGEMENT AND ALLIED SERVICES NEAR BLDG NO C-20 UNDER GE (FW) KOLKATA

Amount

(B/R PORTION) Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for laying pipes etc or for manhole shaft n exc 10 sqm on plan and n exc 1.5m in depth and getting out Soft and loose soil all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point in any type of soil all as specified and directed.

Material and labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation (using 40 mm graded granite stone aggregate) in foundation etc complete all as specified and directed.

Material and labour for RCC type B-1 1:2:4 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams etc basement slabs, under rammed piles and mass concrete all as specified and directed.

Material and labour for RCC type B-1 1:2:4 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roof , landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

Material and labour for providing Reinforced Cement Concrete(1: 2 : 4) type B1 using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m all as specified and directed.

Material and labour for providing Reinforced Cement Concrete(1: 2 : 4) type B1 using 20 mm graded aggregate as in Chajja etc all as specified and directed.

Material and labour for providing Reinforced Cement Concrete(1: 2 : 4) type B1 using 20 mm graded aggregate as in columns, pillars, piers, posts and struts all as specified and directed.

Use and waste of form work to sides of columns, pillars, posts, struts, pairs and stanchions, rectangular or square for rough finished flat surfaces of concrete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; roof beam and similar work; vertical or to batter all as specified.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works, not exceeding 200 mm thick (Horizontal or slopping) for rough finished flat surfaces of concrete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for TMT bars but 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

S&F for 4 mm thick of Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for brickwork with fly-ash bricks (with old size bricks), straight or curved on plan exc 6m mean ratio any radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:6 internal fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of brick work or concrete ceiling surfaces in CM 1:3 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

S&F for liquid water proofing compound complete all as specified and directed

S&F for anodised aluminium powder Coating minimum thickness of powder coating 50 micron to frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for providing on new plaster surfaces of walls applying two coats of distemper oil emulsion over one coat of primer all as specified and directed.

M&L for providing on new plaster surfaces of ceilings applying three coats of white wash all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing all as specified and directed.

S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelim PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, 100mm complete all specified.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all specified.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for 150mm aluminium handles, cast type, anodised complete all specified.

M&L for hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick plain cement concrete type B-1, 1:2:4 using 20mm graded aggregate in plinth protections complete all as specified and directed.

M&L for 100mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) in floors complete all as specified and directed.

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over laid screed bed 20 mm thick CM 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm/600x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and over laid backing coat 10mm thick plaster CM 1:4 complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rendering 20mm thick screed bed on fair faces of roof surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed

M&L for 25mm thick plain cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub bases of floors complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application and over applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre complete all as specified.

S&F for 110mm dia PVC (SWR) soil pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm bore PVC bends etc complete including necessary scoffloding to any height of building all as specified and directed.

S&F in cast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead complete all as specified and directed.

S&F for Salt-glazed stoneware gully traps Size 150x 150mm , square or round mouthed, type "S" type including all items all as specified and directed

S&F for 100 mm dia Cast iron sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors etc complete all as specified and directed.

S & F for CI bend / Tee 100 mm bore etc complete including necessary scaffoliding up to any height of building complete all as specified and directed

S&F for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate in forming channel, benching inside manhole (1/2 or 3/4 section ) in manhole and as coping including form work all as specified and directed.

S&F for 15mm dia bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F for 20mm dia bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F for 25mm dia bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F for 1000ltr capacity rotational moulded polyethylene water storage tanks (cubiod with closed top) hoisted and fixed in position all as specified in SSR Part l complete all as specified and directed.

S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F for 15mm stop/ angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F for 25mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L for 150mm internal dia salt glazed stone ware drain pipes laid in tranches and jointed as specified in SSR Part 1 etc complete all as specified and directed.

M&L concrete bed to drain pipe including packing under and haunching against the side of drain pipe after laid and tested in PCC 1:3:6 type C2 for 150 mm bore pipes complete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

Material and labour for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slab for manholes set in CM 1:4 including necessary form work all as specified and directed.

S&F for table top wash basin Size 470x345x150 mm with pop up drainer complete all as specified and directed. Make: cera Cat No. A2020116,or equivalent make as specified in tender.

S&F for Pillar cock including all fittings complete all as specified and directed. Make : Cera Cat no : G1017101, or equivalent make as specified in tender.

S&F for two way angle cock including all fittings all as specified and directed. Make : Cera Cat no : G1017211or equivalent make as specified in tender.

S&F for Angle cock with wall flange including all fittings all cpmplete as specified and directed. Make : Cera Cat no : G1018201 or equivalent make as specified in tender.

S&F for EWCs with seat cover including all fittings all a specified and directed . Make : Cera Cat No:1013206, or equivalent make as specified in tender.

S&F for Health faucet ABS body with 1 meter SS braided connection pipe including all fittings all as specified and directed. Make : Cera Cat No: F8030109AB or equivalent make as specified in tender.

S&F for towel ring including all fittings all as specified and directed. Make : CERA Cat No. F5013115 or equivalent make as specified in tender.

S&F for Paper Holder with flap guard including all fittings all as specified and directed. Make :Cera Cat No: F5013110 CH ,or equivalent make as specified in tender.

S&F for Soap dish including all fittings all as specified and directed. Make : Cera Cat No: F5013106 or equivalent make as specified in tender.

S&F for towel rack (24'') shelf including all fittings all as specified and directed. Make :Cera Cat No: F5013121 CH, or equivalent make as specified in tender.

S&F for Bottle trap 300 mm including all fittings all as specified and directed. Make Cera Cat No: F8060406 ,or equivalent make as specified in tender.

S&F for urinal size 375x 390x590mm snow white colour including all fittings all as specified .Make : Cera Cat No: S4020112, or equivalent make as specified in tender.

S&F for Urinal division plate including fittings complete all as specified and directed. Make : Cera Cat No: S 4090101 or equivalent make as specified in tender.

S&F for Urinal spreader including all fitting all as specified and directed. Make: Cera Cat No: F8070201 or equivalent make as specified in tender.

S&F for for Mirror size 700x500 mm , 5mm thick glass mirror double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection . Make : Cera Cat No. B 3510106 or equivalent make as specified in tender.

M & L for Surface dressing not exceeding 15 cm deep in soft/ loose soil complete all as specified and as directed.

M&L anti- skid digital , full body, Ceramic tiles Matte finish (in light shade ) 8 to 10 mm thick Size of tiles shall not be less than 1200mm x 600mm , in floor / skirting / dado etc complete all as specified and as directed.

M&L anti- skid digital , full body, Ceramic tiles Matte finish (in dark shade ) 8 to 10 mm thick Size of tiles shall not be less than 1200mm x 600mm in floor / skirting / dado etc complete all as specified and as directed.

M&L for 15 mm thick screed bed in CM (1:6) , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free non skid tiles complete all as specified and as directed.

M&L for 10 mm thick screed bed in CM (1:3) , in skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free non skid tiles complete all as specified and as directed.

Material and labour for providing Plain Cement Concrete (1:3:6) type C2 using 40mm graded aggregate as in foundation, filling and mass concrete all as specified and directed.

Material and labour for brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 etc complete all as specified and directed.

Material and labour for Reinforced Cement Concrete nominal mix type B1 (1:1.5:3) using 20 mm graded aggregate in floor Beams, Roof beam, cantilevers, bressummers, lintels complete all as specified and directed.

Material and labour for Reinforced Cement Concrete nominal mix type B1 (1:1.5:3) using 20 mm graded aggregate Columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour for Reinforced Cement Concrete nominal mix type B1 (1:1.5:3) using 20 mm graded aggregate in floors Slabs, roof slab, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for Reinforced Cement Concrete nominal mix type B1 (1:1.5:3) using 20 mm graded aggregate in footings, foundation beams; plinth beams etc basement slabs, under rammed piles and mass concrete all as specified and directed.

Material and labour for mild steel TMT bars 6mm and 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

Material and labour for rendering 10mm thick on brick wall or concrete surface in cement mortar (1:4) finish even and smooth without using extra cement complete all as specified.

S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters, aluminium section weighing 0.55 Kg/metre including necessary jointing cleats, glazing clips rubber packing handle 2 Nos in each door, hinges, Mortise lock vertical type size 100 mm 4 levers of brass in each door, anodised aluminium snap beading screws etc with 5.5 mm thick tinted glass ordinary quality as per manufactures instruction complete all as specified and directed. (NOTE: Quoted rate shall be deemed to include for all hardware, lock and sheet glass).

S&F 5.5 mm thick toughened frosted glass fixed in aluminium / Upvc beads (beading included with shutter ) or as in hinge door , partition , windows , automatic doors and similar work including cutting to shape , drilling holes as required complete all as specified and as directed.

S & F solar control film 25 micron reflective type (garware sun control or equivalent ) complete all as specified and directed.

M&L for applying 2mm thick wall care putty (in two layers) on old cleaned / prepared surfaces of walls, soffits of chajja, roof slab etc, for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length for upto 4 storey building height including necessary scaffolding, safety and protective measures complete all as specified and directed.

Material and labour for 100 mm thick cement concrete type D-2 1:4:8 (using 40 mm graded granite stone aggregate) in flooring/ hard standing finished even and fair surface complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Preparation of new surface of brick/stone wall any description over 10cm girth or width applying one coat of primer over two coats of synesthetic enamel paint all as specified and directed . Note: colour should be match existing colour.

M&L for 25mm thick prepolished coloured decorative cement concrete chequred tiles/ Endura tiles of size 400x400 jointed and pointed in neat cement slurry with white or coloured to match including over 20mm thick screed bed CM 1:6 complete all as specified and directed.

Material and labour for rendering 10mm thick in CM 1:4 mixed with WP compound on external fair faces of brick work or concrete surface finished even and smooth without using extra cement. Note: Water proofing compound shall be measured separately.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for PCC 1:2:4 type B1 20mm graded aggregate as in copping, bed , hold fast etc. all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B1 20mm graded aggregate as in landings, cover slab (for manhole etc) chullah hoods, chajjas, water troughs, mangers, shelves, and similar articles with plain faces including chamfers, weathering's, throating etc and set in cement mortar 1:6 complete with joints to match except blocks or slabs, complete all as specified and directed.

S & F ornamental MS framed work such as grills, gate, gratings etc with end of bars shouldered and revets welded etc framed guard bars barrel iron door ladder framed balusters walk ways, railing, conforming to Fe-290, Gde-E-165,including, complete all as specified and as directed.

M & L Providing precast reinforced cement concrete RCPC drain cover 100 mm thick of size 600mm x 450 mm as in drain cover with capacity 3MT complete all as specified and as directed.

(E/M PORTION) M & L for concealed type point wiring with 1.50 sqmm (nominal area) FRLSH insulated and unsheathed mould stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/celling including mould steel terminal boxes 1.25 mm thick conforming to IS - 5133(Part -I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked ) for mounting switches/ regulator / bell push etc including 1.50 Sqmm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point / bell point/ ceiling fan / exhaust fan point controlled by one way switch complete all as specified and directed. (a) One light/fan point controlled by one switch.

All as per item No 106 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No 106 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

All as per item No 106 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke ( FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green copper conductor as continuous earth wire with lugs complete all as specified and directed.

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

S & F Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Blank plate, 1 module complete all as specified and directed.

S & F Modular type White cover plate with frame 3 module complete all as specified and directed.

S & F Modular type White cover plate with frame 4 module complete all as specified and directed.

S & F Modular type Metal Flush box 3 module complete all as specified and directed.

S & F Modular type Metal Flush box 4 module complete all as specified and directed.

S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.

S & F exhaust fan 250 mm sweep, AC single Phase 230 / 240 volts, metal body with louver shutters and connecting up with and including twin core twisted flexible copper conductor cable of suitable dia ,nut bolt and accessories, and winding, pending etc connecting up including taking down with re -fixing provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqmm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed.

S & F in repair LED Ceiling light fitting 35/36W recess type as in repair , minimum colour temperature 6500K with suitable driver complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed . Make Crompton LCTLSN-36-CDL or equivalent make as specified in tender.

Supply and Fixing in replacement of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor (multistranded), 1100 volts grade connected with suitable cable gland and aluminium lugs of any size laid in trenches or passing through pipes including testing after laying, including taking up old UNSV cable complete of 16 Sqmm, 4 Core size all as specified and directed.

M&L for sand cushioning /sand covering for underground cable protection and consolidated and compacted with clean dry sand complete all as specified and as directed.

M&L bricks with sub class 'B' locally available laid in trenches above sand cushioning for cable protection complete all as specified and as directed.

Taking down and shifting of XLPE under ground cable of any description 1100 volt grade, cross sectional area 16 Sqmm to 35 Sqmm 2/3½/4 Core including necessary aluminium thimbles, jointing and testing, complete all as specified and as directed.

M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through & including PVC conduit of suitable size in Surface/concealed all as directed.

All as per Srl. Item No. 129 above but with 2 run of 4.0 Sqmm cable and 4.0 Sqmm as earth continuity conductor.

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with 200 amps rated bus bar complete all as specified and as directed.

S & F MCB 'C' curve single pole neutral , 32 Amps with breaking capacity 10kA,complete all as specified and as directed. Make: Cat No.408617 Of Legrand or equivalent make as specified in tender.

S & F MCB 'C' series single pole 5 to 32 Amps, breaking capacity 10KA complete all as specified and as directed. Cat No. 408587, Make: Legrand or equivalent make as specified in tender.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

M/S SRINIVASA CONSTRUCTION (BID ID -3118198)

Shanti Construction Company (BID ID -3120515)

Tirupati Buildcon Pvt. Ltd. (BID ID -3119819)

AZIM ENTERPRISES (BID ID -3117948)

RADHA ENTERPRISE (BID ID -3116700)

MODERN AGENCY (BID ID -3118269)

HYDROTEC (BID ID -3120316)

Shree Mahabir Builders (BID ID -3116849)