NIT NO. 16 (2020-2021) EE(SDW)VI/ ITEM NO.2

Supply of sewage submersible pump of discharge-2450 LPM at 10 Mtr head , CI body , shaft-SS 410, impeller -CF8M, Casing- NiCI, Del Flange Dia- 100 mm, Rated output -7.5kW/10 HP, operated on 3 phase, 50 Hz, 415 V ±10% Maximum -floacting solid -74 mm with 10 mtrs cable Standard accessories with (Single Auto Rail Coupling-1 Set, Duck foot bend-1No, Guide Rail pipe 5 Mtr, Guide rail pipe coupler -1No, Lifting Chain-5Mtr, Make :-KSB/Kishor/Mody/ABS/SU/M&P/Darling any approved make DJB

Supply of suitable for above pumps control panel board for automatic arrangement for 415 volts 3 phase 4 wire 50 Hz AC supply system. Design from MS sheet steel of 1.6 mm & 2 mm thick for frame work and cover, powder coating in approved shade, other accessary items of Ammeter (AE/L&T), voltmeter (AE/L&T), Contactor (L&T), Overload relay (L&T), MCB (30 amp) Single phase prevent and indicating lamps duly wired & painted in feeder pillar double door. Make: Mody / KSB/ SU/M&P any approved make DJB

Providing of Non-Return Valve (NRV) cast iron double flanged single door swing check valve having body, door cover of graded in cast iron to IS:210, Gr.Fg.260, body and door rings of gun metal, hinge pin of stainless steel AISI:410. Flanges to be drilled as per IS:1538 Part-IV & VI. Valves are suitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body (PN-1 Rating). 150 mm dia, Make - Kirloskar/IVC any approved make DJB

Providing of SLUICE VALVE (SV) cast iron double flanged manually operated sluice valve generally conform to IS:14846 having body, door, dome, gland in graded cast iron to IS:210, Gr.Fg.-260 four faces spindle nut of gun metal, inside screwed non-rising stainless steel AISI:410 spindle. Flanges to be drilled as per IS:1538 Part-IV & VI. Valves are suitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1 rating) 150 mm dia, Make - Kirloskar/IVC any approved make DJB

Providing of G.I Pipes 150 mm dia heavy duty -C-Class as per conforming to IS:1239 PART-1 (2004) Make: Tata/Jindal

Providing of G.I Pipes 100 mm dia heavy duty -C-Class as per conforming to IS:1239 PART-1 (2004) Make: Tata/Jindal

S/o G.I. taper 150 mm x 100 mm dia medium class 1mtr long Make- Tata/Jindal

MS clamp for holding 150 mm dia pipe

S/o required off size threaded nut bolts & Washer of good quality

S/o rubber insertion jointing sheet with ISI mark

S/o G.I. Flange 150 mm dia

S/o G.I. Flange 100 mm dia

S/o G.I. Tee 6"x4"

S/o Cross G.I. Tee 6x6x6x6"

Providing of G.I. long bend for 150 mm dia B-Class

Providing of flow meter in outlet line ISI Make

Installation, testing and commissioning of the submersible pump set, laying and fixing G.I. pipe and specials, fixing of the C.I. valves, laying of the copper cable connection of the motor testing commissioning of the pump set on load at site including cartage of the material up to site.

Making Plate form: -Making 02 Nos. supporting arrangement with complete proper foundation and plastering of vertical brick column of size 3.80 x 0.60 x0.60 Mtr. Foundation of size 0.9 x 0.85x0.85 for vertical Hydrant pipe support by Brick work with common burnt clay F.P.S. (Non-Modular) bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1;4 ratio and as per site requirement. 14.25 DSR 2016

Fabrication of platform made out with 10 mm thick chequered sheet 9150 x 1500 mm. The job i/c strengthening the sheet on the angle iron frame made out with the 50x50x5 mm support angle iron. Size of the frame 9150x1500mm

MS Channel of 75 mm X 150 mm X 8mm, length of channel 19500 mm

Supply of GI Pipe 50 mm Dia (heavy duty C-class) Make: Tata/Jindal

Supply and fixing of Handrail support 75 x 75 x 8 mm Height of support 1200 mm.

Fixing of M.S. plate/ M.S. Channel form i/c cutting, welding, grinding loading / unloading complete platform

Gupta Brothers

paramount systems

Goodwill Enterprises

M/S.SUPER TRADERS & ENGINEERS