Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹25,000
Closing Date
22 Jun 2026, 10:12 pmDue tomorrow
Similar tender results from the same govt authority in the past 3 years.
Rural Development and Panchayat Raj Department
PUMP MOTOR REPAIR AND MAINTENANCE
58137
RDPR/2026-27/IND14351
Open
RDPR Gram Panchayat Office Meenukunte TP Yelahanka
3 documents required · 0 mandatory · 3 optional
The tenderer should be a manufacturer who must have manufactured, tested and supplied the equipment (s) similar to the type specified in the ‘Schedule of Requirements’ up to at least xxxx % of the quantity required in any one of the last 3 years. The equipments offered for supply must be of the most recent series models incorporating the latest improvements in design. The models should have been released on or after xxxxx and be in satisfactory operation for xxxxx months as on date of tender opening. Certificates to be provided as per Section XII of Tender Document.
In case of authorized representative/dealer of a manufacturer - The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per General Conditions of Contract and Special Conditions of Contract. Manufacturers Authorization Form to be provided as per Section XIII of Tender Document.
In case of authorized representative/dealer of a manufacturer - The tenderer, as authorized representative/dealer , has supplied, installed and commissioned satisfactorily at least xxxxx % of the quantity similar to the type specified in the Schedule of Requirements in any one of the last three years which must be in satisfactory operation for at least xxxxx months on the date of tender opening. Certificates to be provided as per Section XII of Tender Document.
The legal status, place of registration and principal place of business of the company or firm or partnership.
Details of experience and past performance of the tenderer on equipment offered and on those of similar nature within the past three/five years2 and details of current contracts in hand and other commitments.
A detailed description of the essential technical and performance characteristics of the goods.
A list giving full particulars, including available sources and current prices, of spare parts, special tools, etc., necessary for the proper and continuing functioning of the goods for a period of two years, following commencement of the use of the goods by the Purchaser.
GST Registration Certificate
GSTR3B for Dec 25
Similar Work Done Certificate
Labour Department Certificate
Sample Submission Acknowledgement
IT Returns for Last 3 Financial Years
Average Financial Turnover Certificate for Last 3 financiial Years exceeding 30 Lakhs per financial year
₹500
₹25,000
15 Jun 2026
15 Jun 2026
23 Jun 2026
20 Jun 2026
Oil Seal Steel Bush(oil seal sleeve)
Oil Seal(pump oil seal)
intermediate Piece (I.P.) with I.P. Leaded Bronze Bush
Rewinding of motor of 20 HP
Rewinding of motor of 17.5 HP
Rewinding of motor of 15 HP
Rewinding of motor of 12.5 HP
Rewinding of motor of 10 HP
Rewinding of motor of 7.5 HP
Rewinding of motor of 5 HP
Rewinding of motor upto 3 HP
Transportation of Pumping machinaries
Motor Base with Pin
Circlips(small)
Bearing (Gun Metal Bush) centrifugal cost aluminium bronze bearing bush
Tip Carbon/Ferrode Padding
Thrust Bearing block assembly (TB Bottom)
Carbon housing(TB Plate)
Lock Ring(Circlip Big)
Labour Charges (Overhauling of pump only)
Pump coupling (Stainless)
Pump Key (Stainless Steel) Upto 8 stages
Pump Shaft (Stainless Steel) Counter less ground with key way upto 8 stages
Steel Bush (I.D.O. SS sleeve)
D.O. Bearing( I.D.O LB bush)
Discharge Outlet (D.O.) Bearing(LB bush) and D.O Steel bush(SS sleeve)
Impeller Shell moulded with aluminium & bronze
Supply and fixing of Voltmeter
Supply and fixing of Ammeter
Supply and fixing of LED Indicator
Supply and fixing of wiring kit(SD upto 25HP)
Supply and fixing of wiring kit(DOL upto 7.5HP)(MR)
Supply and fixing of No-Volt (NV) Coil
Supply and fixing of Terminal Plate (connector 60A)
Supply and fixing of Terminal Plate (connector 30A)(MR)
Supply and fixing of RYB Rotary Switch(volt selector)
Supply and fixing of Single Phase Preventer(20 to 30 HP)
Supply and fixing of Single Phase Preventer(7.5 to 15 HP) (MR)
Supply and fixing of 15 Amps Relay (MR)
Supply and fixing of 23 Amps Relay (MR)
Supply and fixing of 33 Amps Relay
Supply and fixing of 25 Amps Contactor
Supply and fixing of 16 Amps Contactor(MR)
Erection of panel Board & MS Box (Outdoor type) (Gulbarga PRED, Pg.No.57, lt.No.12.2)
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron and M.S. flat with bolt, washer etc and painted with 2 coats of red oxide and then two coats of approved paint 75x75x6mm (PWD ELE SR 2014-15, Pg.No.49, lt.No.6.39.3)
Refilling available earth around pipe lines, cable in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m and lift upto 1.5m including cost of all labour complete as per specification PRE SR 2011-12, P-3,1-6.
Labour charges for Laying U.G. Cable upto 3.5 core 25 Sq.mm as per PWD Electrical SR 2010-11, P-68,1-1, Class A PVC cable
Lifting of struck up submersible pump set above 300 ft (BWSSB SR 2017-18/O150G/Sl No.27)
Lifting of struck up submersible pump set upto 300 ft (BWSSB SR 2017-18/O150G/Sl No.26)
Labour Charges Overhauling
Lifting of submersible pumpsets
Re-errection charges of Pumping machinery including overhauling and painting
G.l. Pipe Threading including transportation
Labour Charges (for over hauling)
Supply and fixing of CT coil 50/5 & 75/5
supply and fixing of Blade set 25A
supply and fixing of Blade set 16A(MR)
Supply and fixing of hylum brand hand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc and fixing of exciting wood or metal box using NF Screw
Supplying and fixing polished wood board made out of not less than 15mm thick planks at both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered wooden plugs screws etc
Fabricating, Supplying and mounting MS Box made out 14 SWG suitable for Foor/Wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front over equipped with temper proof locking arrangements with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enamelled metal paint etc., complete
Labour charges for lowering additional GI pipes of dia 32/50mm dia including transportation charges (New GI pipe required will be supplied by the department free of cost & released GI pipes should be handed over to the department (Labour chargesonly) above 3 lengths
Labour charges for lowering additional GI pipes of dia 32 / 50mm dia including transportation charges (New GI pipe required will be supplied by the department free of cost & released GI pipes should be handed over to the department (Labour charges only) Upto 3 lengths
Labour charges for Lifting of non functioning submersible pump set along with cable and GI pipes
Starter 20 HP- ISO CERTIFIED
Starter 17.5HP - ISO CERTIFIED
Starter 15 HP - ISO CERTIFIED
Starter 12.5 HP- ISO CERTIFIED
Starter 10HP - ISO CERTIFIED
Starter 7.5HP- ISO CERTIFIED
Starter 5 HP - ISO CERTIFIED
Motor 5 HP- ISO CERTIFIED
Motor 4 HP- ISO CERTIFIED
Motor 3 HP- ISO CERTIFIED
Non-Return Valve assembly complete with rubber O rings
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
2026-27 Tender Document-v2.pdf
Tender Document • 1.86 MB
Download all tender documents and submit your bid