Construction of Balance work of Litigation shed at Theog Tehsil Theog Distt. Shimla, HP

Amount

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thi+B13:B32rty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in including all leads and lifts as per direction of the Engineer-in-Charge Walls ( any thickness) including attached pilasters, butteresses, plinth and string course etc.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete including all leads and lifts as per direction of the Engineer-in-Charge

Providing and laying Cement Concrete 1:1.5:3 (1 cement :1.5 Sand : 3 graded stone aggregate 20 mm nominal size ) and Curing complete excluding Cost of form work and reinforcement for reinforced Concrete work in including all leads and lifts as per direction of the Engineer-in-Charge Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters, butteresses, plinth and string courses etc.from top of foundation up to heights and floor

Brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:4 (one cement : four sand) second class bricks complete including all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.complete including all leads and lifts as per direction of the Engineer-in-Charge 40 mmm thick 2nd class Deodar wood.

Providing and fixing shutter with out hings are provided instead of open able shutter for doors windows etc. 35 mm thick 2nd class Deodar wood. including all leads and lifts as per direction of the Engineer-in-Charge

P/F 12 mm thick prelaminated board both side bwp phenol bonded exterior/interior grade panalled shutters with frame of first class deodar wood for doors including bright finished/black enamelled iron butt hinges with necessary screws 40 mm thick frame.including all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws.40 mm thick 2nd class deodar wood including all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing 75 mm x 60mm rounded hand rails in straight length complete in.1st class deodar wood.including all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws .including all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing oxidized M.S. sliding door bolts with nuts and screws etc. complete .including all leads and lifts as per direction of the Engineer-in-Charge 250x16 mm

Providing and fixing oxidised M.S. tower bolts (barrel type) with necessary screws etc. including all leads and lifts as per direction of the Engineer-in-Charge 200x10 mm

Providing and fixing oxidized M.S. handles with the necessary screws etc. complete.including all leads and lifts as per direction of the Engineer-in-Charge 125mm .

White glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3 sand) finished with flush pointing in white cement .including all leads and lifts as per direction of the Engineer-in-Charge 15cm x 20cm

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement including all leads and lifts as per direction of the Engineer-in-Charge 40 mm thick

Providing and laying 20mm. thick acid proof tiles of size upto 300 x 300mm. of specified shade in floors, treads of steps and landing laid on a bed of 12mm. thick cement mortar 1:3(1 cement: 3 sand) jointing with cement slurry mixed with pigment to match the shade of tiles.including all leads and lifts as per direction of the Engineer-in-Charge 40 mm thick

Cement plaster skirting (upto 30cm height) with cement morter 1:3 (1 cement:3 sand) finished with a floating coat of neat cement including rounding of junction with floor. including all leads and lifts as per direction of the Engineer-in-Charge 40 mm thick

Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:3 (1 cement :3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete.including all leads and lifts as per direction of the Engineer-in-Charge

Kota stone slab 25 mm thick in risers of steps,skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing including all leads and lifts as per direction of the Engineer-in-Charge 25 mm thick

Providing and laying heavy duty precast cement concrete interlocking paver block vibro compacted up to M -50 gradei/c border of curb block grey of coloured over sub base of concrete with 25 mm average thivkness of cement mortar 1:4 ( 1cement :4 sand )layed over jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing and polishing complete (sub base concrete floor to be paid for 40 mm thick block including all leads and lifts as per direction of the Engineer-in-Charge .

Providing and laying four courses water proofing treatement with bitumen flet over roofs consisting of frist and third courses of blown or/residual bitumen applied hot at 1.45 kg per sqm of aera for each course second course of roofing left type3 grade 1 (hessian base self finished bitumen elt) and fourth and final course of stone gret 6mm and down size or pea sized gravel spread at 6cu.dmor 0.006cum)per sqm including preperation of surface excluding grating complete including all leads and lifts as per direction of the Engineer-in-Charge .

Providing and fixing 0.60mm thick prepainted steel sheet of approved brand and shade and design in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating including fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge:-0.60 mm ( zero point sixty millimetre) thick sheet complete upto all floor levels including carriage of materials in all leads and lifts.

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheets of approved brand, shade and design in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges:-0.60 mm ( zero point sixty millimetre) thick sheet complete upto all floor levels including carriage of materials in all leads and lifts.

Providing and fixing flashing 38cm overall with 0.60mm thick prepainted sheet of approved brand shade and design in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge:-0.60 mm ( zero point sixty millimetre) thick sheet.

Providing and fixing M.S. B.P Sheet 2.00 mm (two milimetre) thick in eaves board/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid for separtely) complete upto all floor levels including carriage of materials in all leads and lifts.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm X10 mmX2mm and braced with flat iron diagonals 20 mm X5 mm size with top and bottom rails of T.iron 40 mm X40 mm X6 mm with 38 mm dia steel pulley complete with bolts and nuts locking arrangements, stoppers,handles,including applying a priming coat of red lead paint. including carriage of materials in all leads and lifts.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamal paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete upto all floor levels including carriage of materials in all leads and liftsin With enamal paint other then white.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting complete upto all floor levels including carriage of materials in all leads and lifts in Ready mixed paint brushing wood primer pink.

Painting two coats (excluding priming coat) on new wood and wood based surface with enamal paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping complete upto all floor levels including carriage of materials in all leads and lifts in With enamal paint other than white.

Applying Birla white wall care putty or equivalent over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete upto all floor levels including carriage of materials in all leads and lifts.

Finishing wall with weather proof exterior grade emulsion of approved shade Apexultima or its equarlied on undecorated wall surfaces (two or more coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete upto all floor levels including carriage of materials in all leads and lifts.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth as required for making the surface complete upto all floor levels including carriage of materials in all leads and lifts.

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand papered smooth complete upto all floor levels including carriage of materials in all leads and lifts in Cement mortar 1:6 (1 cement : 6 sand)

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design. including all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including all leads and lifts as per direction of the Engineer-in-Charge W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. including all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including all leads and lifts as per direction of the Engineer-in-Charge One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing C.P. brass flush pipe/spreaders for urinal with fitting such as unions,clanmps etc (all in C.P. brass, including cutting holes and making good the same but excluding fitting including carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing C.P. brass wash basin with single hole for pillar tap with C.I.or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge. Flat Back 550x400

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. including carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing C.P. brass towel rail fixed to wooden plugs with C.P. brass screws including carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing toilet paper holder C.P. brass screws including carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing charomium plated brass soap dish with CP brass brackets fixed to wooden plugs including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing division plated for urinals 600 mm x300 mm vitreous china including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge

.Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 .including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge 15 mm nominal bore.

Providing and fixing PVC connection pipe with brass unions :45 cm long 15 mm nominal bore.including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing brass full way valve with wheel of approved quality (screwed end) :including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge.15 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32 mm dia.including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-AL-PE) composite pressure pipe U.V. stablized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall.including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge.1620 mm ( 20 mm OD pipe).

Providing and fixing PE-AL-PE- composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etc.including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge.Female Branch Tee1620 X 1620 X 20 mm thread.

Female elbows 1620 x 20 mm thread.

Female elbows 1620 x 20 mm thread.

Male Theard connector 1620x1620x20mm

Providing and fixing PVC water storage tank double layer of required sizes tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge110x90mm

Providing and fixing ISI marked high pressure PVC spigot and socket, waste and ventilating pipes including fixing with approved adhesive etc. complete.:including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge 110 mm dia.

90 mm dia.

Providing and fixing PVC single equal branch with oval access door, insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.:including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge 110 mm dia.

90 mm dia.

Providing and fixing PVC plain bend including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge 110 mm dia.

90 mm dia.

Providing and fixing PVC single equal branch plain including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge 110 mm dia.

90 mm dia.

Providing and fixing PVC collers including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge 110 mm dia.

90 mm dia.

Providing and fixing PTMT jet spray of approved quality with 1.5 metre tube.including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge.

Providing and fixing 100mm sand cast iron grating for gully floor or nahni trap:including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge

Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including carriage of materials within all leads and lifts as per direction of the Engineer-in-Charge

Mohinder Verma