GE ELECT/TOKEN-56/2026-2027

Supply, installation, testing and commissioning in replacement of factory made and tested (including CPRI type tested certified panel) LT Panel board ,cubical compartmentalized , out door type, mounted on angle iron legs 50x50x6mm thick, suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system accomodated with 01 No ACB 4 pole, 800 Amp, 50 KA, 415 Volt AC Horizontal draw out type motorized, front operated with Microprocessor based LCD protection release for adjustable over current, short circuit and earth fault protection fitted with aluminium bus bar link 1200 Amps for incomming and outgoing cable connection. The panel shall be dust and vermin proof. IP-65 class protection and shell be made of 3.15 mm CRCA MS sheet, and 50x50x6mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, front and rear opening type, with apron for cable entry closing locking arrangement . including excavation, earth work and platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class 'B', old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed sotne aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 45 cm above the nearest road level complete all as specified and directed by Engr-in-Charge.

Supply, installing, testing and commissioning in replacement of factory made and tested (including CPRI type tested certified panel) LT Panel board ,cubical compartmentalized , out door type double door , platform mounted, suitable for 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with insulated aluminium bus bars four pole installed on porcelain/SMC insulator. The fixing of double doors shall be on MS hinges with anti-theft provision (the door can’t be removed from enclosure without cutting the enclosure). The panel shall be dust and vermin proof. IP-65 class protection and shell be made of 3.15 mm CRCA MS sheet, and 50x50x6mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, front and rear opening type, with apron for cable entry closing locking arrangement including internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size ( but not less than 2.5 Sqmm) and comprising of the following complete all as specified and directed by Engr-in-Charge.:- INCOMING :- (i) MCCB 4 pole, 630 Amps, 50 Hz, 415 Volts, 50 KA with microprocessor release - 01 No (ii) Voltmeter 0-500 volts digital type with 4 way rotary selector swicth -01No (iii) Ammeter digital type with 4 way rotary selector switch-01No (iv) CTs ratio 630/5 A ,class 1, ISI marked -01 sets of three (v) Indicating lamp- 01 set of three (vi) Aluminium bus bar of rating 1000 A- set of four (vii) On load changeover switch 630 Amp - 01 No (b) Outgoing :- (i) MCCB 4 pole, 315 Amps, 50 Hz,415 Volts, 36 KA with thermal magnetic release - 02 Nos (ii) MCCB FP, 250 Amps, 50 Hz, 415 Volts, 25 KA with thermal magnetic release - 02 Nos (iii) MCCB FP, 100 Amps, 50 Hz, 415 Volts, 16 KA with thermal magnetic release - 03 Nos PLATFORM FOR PANEL :- Platform for the panel with PCC 1:4:8 type D-2 with 40 mm graded crushed stone, 15 cm thick in foundation, brick work in CM 1:6 with sub class 'B', old size bricks, rendering 15 mm thick in CM 1:6 on exposed surfaces and 100 mm thick PCC padding 1:3:6, type C-1 using 20 mm graded crushed stone aggregate on top and grouting bolts etc for panel. The platform shall be such that it is of a height 45 cm above the nearest road level. Note :- (i) All out going feeder shall be connected by cable through suitable size gland plate / glands. (ii) All MCCB with adjustable protection for over load and short circuit and conforming to IEC60947/IS 13947/Pt.II/1993 (Latest Version). The MCCB should have Ics=100%Icu. The MCCBs shall have spreader links and barriers as standard feature of manufacturer

All as in item No 2 here-in-before but comprising of the following complete all as specified and directed by Engr-in-Charge.:- (a) Incoming :- (i) MCCB 4 pole, 630 Amps, 50 Hz, 415 Volts, 50 KA with microprocessor release - 01 No (ii) Voltmeter 0-500 volts digital type with 4 way rotary selector swicth -01No (iii) Ammeter digital type with 4 way rotary selector switch-01No (iv) CTs ratio 630/5 A ,class 1, ISI marked -01 sets of three (v) Indicating lamp- 01 set of three (vi) Aluminium bus bar of rating 1000 A- set of four (vii) On load changeover switch 630 Amp - 01 No (b) Outgoing :- (i) MCCB 4 pole, 400 Amps, 50 Hz,415 Volts, 36 KA with thermal magnetic release - 01 Nos (ii) MCCB FP, 315 Amps, 50 Hz, 415 Volts, 25 KA with thermal magnetic release - 01 Nos (iii) MCCB FP, 100 Amps, 50 Hz, 415 Volts, 16 KA with thermal magnetic release - 04 Nos

All as in item No 2 here-in-before but comprising of the following complete all as specified and directed by Engr-in-Charge. :- (a) Incoming :- (i) MCCB 4 pole,400 Amps, 50 Hz, 415 Volts, 35 KA with microprocessor release - 01 No (ii) Voltmeter 0-500 volts digital type with 4 way rotary selector swicth -01No (iii) Ammeter digital type with 4 way rotary selector switch-01No (iv) CTs ratio 400/5 A ,class 1, ISI marked -01 sets of three (v) Indicating lamp- 01 set of three (vi) Aluminium bus bar of rating 640 A- set of four (b) Outgoing :- (i) MCCB 4 pole, 125 Amps, 50 Hz,415 Volts, 36 KA with thermal magnetic release - 06 Nos

All as in item No 2 here-in-before but comprising of the following complete all as specified and directed by Engr-in-Charge.:- (a) Incoming :- (i) MCCB 4 pole, 400 Amps, 50 Hz, 415 Volts, 35 KA with microprocessor release - 01 No (ii) Voltmeter 0-500 volts digital type with 4 way rotary selector swicth -01No (iii) Ammeter digital type with 4 way rotary selector switch-01No (iv) CTs ratio 400/5 A ,class 1, ISI marked -01 sets of three (v) Indicating lamp- 01 set of three (vi) Aluminium bus bar of rating 640 A- set of four (b) Outgoing :- (i) MCCB 4 pole, 250 Amps, 50 Hz,415 Volts, 25 KA with thermal magnetic release - 02 Nos (ii) MCCB FP, 125 Amps, 50 Hz, 415 Volts, 16 KA with thermal magnetic release - 04 Nos

All as in item No 2 here-in-before but comprising of the following complete all as specified and directed by Engr-in-Charge. :- (a) Incoming :- (i) MCCB 4 pole, 630 Amps, 50 Hz, 415 Volts, 50 KA with microprocessor release - 01 No (ii) Voltmeter 0-500 volts digital type with 4 way rotary selector swicth -01No (iii) Ammeter digital type with 4 way rotary selector switch-01No (iv) CTs ratio 630/5 A ,class 1, ISI marked -01 sets of three (v) Indicating lamp- 01 set of three (vi) Aluminium bus bar of rating 1000 A- set of four (vii) On load changeover switch 630 Amp - 01 No (b) Outgoing :- (i) MCCB 4 pole, 400 Amps, 50 Hz,415 Volts, 36 KA with thermal magnetic release - 01 Nos (ii) MCCB FP, 250 Amps, 50 Hz, 415 Volts, 25 KA with thermal magnetic release - 02 Nos (iii) MCCB FP, 125 Amps, 50 Hz, 415 Volts, 16 KA with thermal magnetic release - 02 Nos (iv) MCCB FP, 63 Amps, 50 Hz, 415 Volts, 10 KA with thermal magnetic release - 01 Nos

All as in item No 2 here-in-before but comprising of the following complete all as specified and directed by Engr-in-Charge. :- (a) Incoming :- (i) MCCB 4 pole , 315 Amps,50 Hz,415 Volts, 50 KA, with microprocessor release - 01 Nos (ii) Voltmeter 0-500 volts digital type with 4 way rotary selector swicth -01No (iv) Ammeter digital type with 4 way rotary selector switch-01No (iv) CTs ratio 315/5 A ,class 1, ISI marked -01 sets of three (v) Indicating lamp- 01 set of three (vi) Aluminium bus bar of rating 600 Amps- set of four (b) Outgoing (i) MCCB 4 pole , 250 Amps,50 Hz,415 Volts, 25 KA with thermal magnetic release - 02 Nos (ii) MCCB 4 pole , 100 Amps,50 Hz,415 Volts, 16 KA with thermal magnetic release - 02 Nos (iii) MCCB 4 pole , 63 Amps,50 Hz,415 Volts, 10 KA with thermal magnetic release - 01 Nos

All as in item No 2 here-in-before but comprising of the following complete all as specified and directed by Engr-in-Charge.:- (a) Incoming :- (i) MCCB 4 pole , 250 Amps,50 Hz,415 Volts, 35 KA, with microprocessor release - 01 Nos (ii) Voltmeter 0-500 volts digital type with 4 way rotary selector swicth -01No (iii) Ammeter 0-250 Amp digital type with 4 way rotary selector switch-01No (iv) CTs ratio 250/5 A ,class 1, ISI marked -01 sets of three (v) Indicating lamp- 01 set of three (vi) Aluminium bus bar of rating 500 Amps- set of four (b) Outgoing :- (i) MCCB TP, 125 Amps, 50 Hz, 415 Volts, 25 KA with thermal magnetic release - 02 Nos (ii) MCCB TP, 63 Amps, 50 Hz, 415 Volts, 25 KA with thermal magnetic release - 04 Nos

Supply and fixing LT Panel made out of thermoplastic polycarbonate with IP-65 protection including all fixing arrangment as angle iron or PCC foundation with following specification complete all as specified and directed by Engr-in-Charge.:- Type of enclosure- Thermoplastic Polycarbonate. Busbar rating: 630A Cu. Degree of protection: IP65 (IEC 60529) System Voltage: 415V, 50Hz, 4Wire+E Cable Entry- Incoming/Outgoing from Bottom Installation- Outdoor/Floor Mounting. Finish Shade: Enclosure & Accessories: RAL 7035 Mounting structure: RAL 7016 INCOMER: 320A FP 50kA Microprocessor MCCB with O/L, S/C and E/F protection: 1 No METERING: R/Y/B LED Indicating lamp: Each 1No. Digital Ammeter and Voltmeter: Each 1 No. CT: 300/5A – 3 Nos Control Fuse with base (2/32A)- 6 Nos. OUTGOING: 250A FP 25kA MCCB- 2 Nos. 100A FP 18kA MCCB- 2 Nos. 63A FP 18kA MCCB-1 No TERMINAL BLOCKS: 35 Sqmm TB : 8 Nos. 16 Sqmm TB : 4 Nos

Supply and fixing LT Panel made out of thermoplastic polycarbonate with IP-65 protection including all fixing arrangment as angle iron or PCC foundation with following specification complete all as specified and directed by Engr-in-Charge. :- Type of enclosure- Thermoplastic Polycarbonate. Busbar rating: 400A Cu. Degree of protection: IP65 (IEC 60529) System Voltage: 415V, 50Hz, 4Wire+E Cable Entry- Incoming/Outgoing from Bottom Installation- Outdoor/Floor Mounting. Finish Shade: Enclosure & Accessories: RAL 7035 Mounting structure: RAL 7016 INCOMER: 250A FP 36kA Microprocessor MCCB with O/L, S/C and E/F protection: 1 No METERING: R/Y/B LED Indicating lamp: Each 1No. Digital Ammeter and Voltmeter: Each 1 No. CT: 250/5A – 3 Nos Control Fuse with base (2/32A)- 6 Nos. OUTGOING: 100A FP 25kA MCCB- 2 Nos. 63A FP 18kA MCCB- 3 Nos. TERMINAL BLOCKS: 35 Sqmm TB : 8 Nos. 16 Sqmm TB : 12 Nos