Renovation strengthening of EI and fans at Radhey Shyam park Ayurvedic dispensary under in ward no 22E shahdara south zone Sub Head Provision of E.I and Other allied work

Amount

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry encolsure with cover plate having locking arrangement and watering pope etc. ( but without charcoal / coke and salt ) as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated per conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required.Group C

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required 3x2.5 sq.mm

3x4.0 sq mm

3x6.0 sq mm

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing CB DB complete with connections, testing and commissioning etc. as required.( 25 A

supply and fixing of following sizes medium class pvc conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required a)25 mm

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel,making connections, etc. as required 100 A TP&N

Supplying and fixing 8 way, Double door , single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker single pole suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 63 Amp rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding,Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supply of 15 (380mm) sweep 1400 rpm exhaust fan heavy duty complete with shutters, blades etc as reqd.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 400 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

supply of PVC Insulated PVC Sheathed Al. Conductor Armoured Cable for working voltage upto 1.1kV confirming to IS-1554(Part-I) of following sizes:2 x 10 sq.mm

4x25 sq.mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

SITC of 30W LED Flood Light luminiare fitted with lense, made of pressure die cast aluminium housing & toughned glass cover complete with the following specification as reqd.. (b) Total system wattage =30 watt +/- 5% c) Luminaire Efficacy>=100 Lm/w d) Power Factor>=0.95s f) Protection IP-66

P&F of water/weather proof junction/pole box made out of 16 SWG MS sheet steel of size200x150x100mmdeep dully painted complete with one No SP-MCB(6to32Amp) and neutral link & locking arrangement etc as reqd.

S/I/T/C of LED Tube type luminaire 20 Watt rating complete with Extruded Aluminium Batten prewired with high efficient LEDs with the following: a) LED fixtures Wattage 20 ±5% Watt ( Total system wattage) b)Luminaries efficacy ≥ 100 Lumens/ watt c) Pf ≥ 0.95 d) Protection -IP-66

Supply of 5/6 Amp Batten Holder (Polycarbonate) as required.

Supply of 9watt LED bulb suitable for 230-250vots ac at 50z

SITC of single phase/three phase monoblock pump set complete with allaccessories workable on 240/415V ,50HZ ac supply 1hp single phase pump set head from 12-30 meter suction and delivery 25*25mm

supply and fixing of 400mm single phase swing wall fan as reqd.

supply and laying of 6 sq mm aluminium conductor PVC insulated flat twin core W/P wire complete as required

SITC of Desert cooler in metalic body of 18mm gauge ,12 inch deep capacity with fan of 18 inch size having 3 blades heavy duty motor with iron angle stand as per required size and design

Providing and fixing of invertor of 2000 VA 2 Nos 150 AH Batteries with trolley suitable for keeping 2 Nos Battery and 1 no inverter i/c wiring & connections etc as reqd.

Supply of 1.5 Ton inverter split Air Conditioner (5star rating)along with copper condenser coil and free 4 meter copper piping &3 core suitable copper wire PVC hard drain pipe with remote suitable for 230V AC supply complete as required

P&F of 4.0 KVA Voltage Stabilizer with TDR and Triple step, High & Low voltage Cutt off device complete as reqd.

Standard Installation charges for split AC including labour and petty items reqd. for the installation of the same as complete as reqd.

Supply and Fixing of angle iron stand for Split AC as reqd.

S & F of extra copper piping with 3 core electric wire, PVC Hard drain etc. as reqd.

Supply & fixing of Drain Tray for window AC as reqd.

G D Electricals