PETTY REPAIR MAINTENANCE OF ELECTRIC SUPPLY AT PDDE NC OFFICE AND RESIDENTIAL COMPLEX UNDER GE AF JAMMU

Amount

Attending complaints for checking of existing electrical points wiring upto size 6 sqmm in any Buildings for continuity ,no light including carrying out minor repairs etc as required to make the item functional and replacing burnt wire ends, small pieces of wire, tightning of loose connections etc all as specified. Note: Contractor shall provide his tradesmen/labour along with necessary tools to rectify defects from 0830 to 1700 Hrs on all working days to the complaint cell and complaints will be attended on the same day itself.Recovery for non attending complaints will be three times rate quoted by the Contractor. (b) One complaint shall be considered as Each Job (c) The contractor shall depute ITI holder electrician & semi skiilled helper to attend complaits, with proper uniform as finalised by Engr-in-Charge, with name tag. (d) Material required for attending complaints will be given as supply only item. (e) Any parts required to be replaced shall be replaced and paid separately as "supply only " against relevant item (s) of this schedule. (f) Taking down the 'Supply only' item is included in the rate quoted against of Sl item No. 1 of BOQ.

Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately.

M&L for point wiring for light/fan/Bell with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping or existing conduit with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc. complete all as specified and directed.

All as per item No.3 above but for one multipin 5 amps socket outlet on same board.

All as per item No.3 above but for one multipin 5 amps socket outlet on independent board

All as per item No. 3 above but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multi pin 15 amps socket outlet flush type on independent board.

M & L switch piano button flush type, single pole one way 5 amps complete all as specified and directed.

M & L switch bell push piano flush button single pole one way 5 amps complete all as specified and directed.

M & L piano switch two way flush button SP 16 amps complete all as specified and directed. .

M & L 5 pin socket outlet 2 in 1, 3 pin, 5 amps flush type complete all as specified and directed.

M& L 5 pin switch socket combination 2 in 1, 5 amps flush type complete all as specified and directed.

M & L switch socket combination 5 in 1, 5 and 16 Amp flush type controlled by one switch complete all as specified and directed.

M & L ceiling rose, 3 phase on PVC square blocks surface bakelite 65 x 50 mm, 3 terminal complete all as specified and directed.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

M & L flush type fan regulator 230V, electronic rotary stepped complete all as specified and directed.

M & L Call bell ding dong AC, 23 Volts, single pole type complete all as specified and directed.

M & L Switch Modular (piano) flush button single pole one way 6 amps 1 module with suitable plate and cover complete all as specified and directed.

M & L Switch Modular (piano) flush button single pole one way 16 amps with suitable plate and cover complete all as specified and directed.

S & F Socket outlet flush modular (piano) type 5 pin 6 Amps with suitable plate and cover complete all as specified and directed.

S&F in repair Socket outlet flush universal modular (piano) type 6 pin 6/16 Amps with suitable plate and cover complete all as specified and directed.

Supply only three modular sheet fitting.

Supply only four modular sheet fitting.

Supply only Six modular sheet fitting.

Supply only twelve modular sheet fitting.

Supply only copper wire 1.5 Sqmm single core

Supply only copper wire 2.5 Sqmm single core

M&L for sub main wiring with two run of 6 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLS cable in and including electrical grade PVC conduits of desired colour not less than 1.2 mm thick and 25 mm wide & 6 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

All as per item No. 27 above but size 2.5 Sqmm two runs and with 2.5 Sqmm FRLS copper wire for earth continuity.

S & F LED tube light fitting 18/20 watt wall mounted LED batten with aluminum housing & integrated electronic driver complete all as specified and directed.

S & F LED tube light fitting 9/10 watt wall mounted LED batten With aluminum housing & integrated electronic driver complete all as specified and directed.

S & F in repair by flushing to walls MCB distribution board Double door SPN 230 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc complete all as specified and directed.

S & F in repair by flushing to walls MCB distribution board Double door SPN 230 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc complete all as specified and directed.

S & F in repair by flushing to walls MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc. complete all as specified and directed.

S & F in repair Distribution board iron clad TPN DB, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar. Make-Legrand Cat pt No 5077 20 or equivalent of make L&T / Merlin Gerin multi-9 complete including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge (Note: MCB's and MCCB will be measured and paid separately under relevent items)

S&F MCB SP 6 to 32 Amps, 240 Volts complete all as specified and directed.

S&F MCB SPN upto 32 Amps ,240 Volts complete all as specified and directed.

M&L MCCB TPN 100 Amps ,415 Volts complete all as specified and directed.

M & L MCCB TPN 125 Amps ,415 Volts complete all as specified and directed.

M & L MCB SPN 63 Amps, 230 V,AC complete all as specified and directed.

M & L TPN 63 Amps 415 V complete all as specified and directed.

M & L in repair metal socket enclosure with 240 volt MCB 20 Amps, with metal plug top complete all as specified.

Supply only 10 Watt energy efficient wall mouted LED Bulk head luminaire made off die cast aluminium with opal diffuser complete all as specified and directed.

Supply only 36 watts recess /pendant mounting ultraslim LED flat panel 2' X 2' made of extruded aluminium frame with high LEDs & glare free opal diffuser complete all as specified and directed.

Supply only round sheet for blank area 2.5" dia and 3" complete all as specified and directed.

S&F MCCB Three pole 415V 125 Amps 16 kA incl taking down old unserviceable one complete all as specified and directed. .

S&F MCCB Three pole 415V 200 Amps 25 kA incl taking down old unserviceable one complete all as specified and directed.

S&F MCCB Three pole 415V 250 Amps 25 kA incl taking down old unserviceable one complete all as specified and directed.

S&F PVC electrical insulation tape width 25-30mm and length 35-40 mtrs complete all as specified and directed.

S&F 9 watts LED Bulb complete all as specified and directed.

S&F 18 way modular box complete all as specified and directed.

S&F 14 way modular box complete all as specified and directed.

S&F 12 way modular box complete all as specified and directed.

S&F 6 way modular box complete all as specified and directed.

S&F 4 way modular box complete all as specified and directed.

S&F 3 way modular box complete all as specified and directed.

Taking down carefully the existing unserviceable ceiling / Exhaust fans/ Wall mounted fan of any make/ model and sweep from different sites in the building for overhauling / servicing after disconnecting carefully cleaning and checking unserviceable components, and replacing the defective components such as bearing, rubber bush/bolt, gunmetal bush, capacitor burnt windings flexible cord, shaft and painting etc., including assembling after lubricating the movable components and installing in its original position connecting, testing and commissioning all as specified and directed by the Engineer-in-charge. Note:-Bearing/ Gunmetal bush/ rubber bush bolt/ capacitor / cord flexiable / stator/rotor and painting only will be measured and paid separately under respective item.

M & L for rewinding of ceiling fans 1200/1400mm sweep of any make/model, including removal of existing burnt windings carefully from the slots,cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enmelled copper winding wire of same gauge/same number of turns as that of existing and connecting the coils suitable to operate on 230 volts single-phase AC supply permanent capacitor type, tying the windings and applying air dry insulating varnish and drying the windings including replacing the defective components such as bearing, gun metal bush,rubber bush/bolt, capacitor,flexible cord, shaft and painting including assembling after lubricating movable components complete including testing complete all as specified and directed for :- Note :-(1) Fan will be issued from AGE E/M store yard through gate pass.(2) Bearing/ Gunmetal bush/ rubber bush bolt/ capacitor / cord flexiable / stator/rotor and painting only will be measured and paid separately under respective item.

All as per item no 57 above but exhaust fan of 450/375/300mm sweep of any model/make.

All as per item no 57 above but Wall mounting fan of any sweep , any model/make.

Supply only ball bearing suitable for any fans of any Sweep any make / model all as specified and directed by the Engineer-in-charge. Make TATA, SKF

Supply only gunmetal bush suitable for ceiling fan / wall mounting fan of any make/model/ sweep of 1200/1400 mm and Exhaust fan of any sweep all as specified and directed by the Engineer-in charge.

Supply only twin core PVC flexible copper conductor of size 23/0076 all as specified and directed by the Engineer-in-charge

Supply only capacitor of 2.5 Mfd. AC 230/240 volts, 50 Hz

Supply only capacitor of 3.15 Mfd. AC 230/240 volts, 50 Hz

S&F capacitor of 4.0 Mfd. AC 230/240 volts, 50 Hz

Supply only of PVC canopies of suitable size for ceiling fan of any make/model(set of two) with screws.

Supply only U clamps with rubber reel and nuts/bolts of suitable size with pins.

S&F of rubber bush kit suitable for exhaust/wall mounting fan of any make/sweep complete.

Taking down existing louvers from any location or any height of bldg. with safety and re-fixed after repair with fastner complete all as specified and directed.

Supply only of metallic / plastic louvers of size 21" x 21" for 350mm/ 450mm/ 300mm sweep exhaust fan including fixing arrangment i.e. nuts , bolts, washers etc. complete all as specified and directed by Engr-in Charge.

S & F Modular regulator electronic rotary step type suitable for ceiling fan of sweep 1200/1400 mm complete all as specified and directed.

Disconnecting water and electric connections from existing position of geyser capacity 25/50 ltr, taking down geysers fixed to walls at any height, transporting to/ depositing in MES store yard for inspection of Engineer-in-Charge to ascertain the serviceability / unserviceability and quantam of repairs involved including transportation of serviceable geyser capacity 25/ 50 Ltr from workshop to building site as directed for fixing in existing position making water and electric connections and testing complete as directed.

Repairs to geyser capacity 25/ 50 Ltr involving the following operations. (a).Dismantling (opening) of geyser complete in MES yard / workshop part by part of all the stationary parts, cleaning the covers and parts as applicable (b).Servicing, cleaning of geyser accessories and parts as applicable such as inner tank body, water inlet/ outlet assembely, heating element etc descaling with acid wash all as directed by Engineer-in-Charge. (c). Assembling of geyser complete with old serviceable parts, replacement of unserviceable parts by new as ordered, renewal of nuts bolts and washers, rubber gasket complete as directed by Engineer-in-Charge. Note:- (i) Parts required to be replaced shall be measured and paid separately as "supply only " against relavant item (s) of this schedule. However, labour element involved in replacement is included in unit rate quoted against this item. (ii) Any minor parts / repairs involved to make the geyser completely functional even if not notified by Engineer-in-Charge shall be carried out by the contractor without any extra cost to the Deptt.

S&F Heating element with rubber washer ('O' ring) cap 1.5 KW. (triangular / round ) any type. Make- Make- Theetta, Micron., DasPass , Bajaj

S&F Heating element with rubber washer ('O' ring) cap 2 KW (trangular/ round ) Type Make- Theetta, Micron., DasPass , Bajaj

S & F indicator bulb neon round / square type single phase 230 Volt

S & F Safety plug 15mm ( brass ) for geyser cap 25/50 Ltr.

S & F Thermostat 30 deg.C to 70 deg.C 230 Volts.

Supply only geyser water (inlet/outlet) assembly brass for geyser cap 25 Ltr of any type.(Geyser make :- Super hot, Racold, Bathwell, Ditz, Kumar, Pearl, Classic, Pieco)

S & F PVC connection 600 mm long complete with brass nut, washers, seals, etc suitable for hot & cold water complete all as specified and directed. Make: Theetta / Micron / DasPass / Bajaj

"Taking out of old unserviceable PVC under ground LT cable of any size and type fixed on pole, wall or laid in floors, trenches, across road crossing etc ,including taking out of cable covers of precast PCC / RCC slab or brick cover etc setting aside serviceable materials in safe custody for reuse and or unserviceable materials consider as schedule of credit complete all as specified and as directed. Note:- i). Dismantling of clamps nuts bolts etc, taking out of GI pipe in cable protection shall be measured and paid seperately under respective item of this schedule. ii).Cost for making good the disturbed surfaces of floors / walls in cement mortar 1:3 shall deemed to be included in the unit rate quoated . However cost for making good the disturbed surfaces of roads with PCC and hard core filling is out of scope of this work and shall be measured and paid separetely "

Supply , laying , testing & Commissioning UG cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm, 4 core, with taking down old cable complete all as specified and directed by Engr-in-Charge.

All as per as per item No-82 but size 16 sq mm, 4 core.

All as per as per item No-82 but size 25 sq mm, 3.5 core.

All as per as per item No-82 but size 35 sq mm, 3.5 core.

All as per as per item No-82 but size 50 sq mm, 3.5 core.

All as per as per item No-82 but size 70 sq mm, 3.5 core.

All as per as per item No-82 but size 95 sq mm, 3.5 core.

Supply and laying of DWC (Double wall corrugated) HDPE pipe, ISI marked, IS-14930 Part-II, having outer dia as 77 mm and inner dia as 63mm, with smooth internal surface and profiled external surface for non pressure under ground cable including all connected accessories/fittings such as coupler, 'O' ring, etc. for protection of under ground cable complete all as specified and directed by Engr-in-Charge. MAKE: Rex-Polyextrusion/Gemini or E-in-C's approed make.

Supply and laying of DWC (Double wall corrugated) HDPE pipe, ISI marked, IS-14930 Part-II, having outer dia as 120 mm and inner dia as 103 mm, with smooth internal surface and profiled external surface for non pressure under ground cable including all connected accessories/fittings such as coupler, 'O' ring, etc. for protection of under ground cable complete all as specified and directed by Engr-in-Charge. MAKE: Rex-Polyextrusion/Gemini or E-in-C's approed make.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil for laying of LT UG cables complete. Note:- The Rate quoted deemed to including cutting and removal of PSP Sheets wherever occured during excavation and the same shall be staged at desired location as directed at site

Returning, filling in, including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick in any soil complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M & L for Cutting through existing road surfaces i.e. surfacing PCC soling etc, and making trench of minimum 500mm wide 100cm in depth along the cross section of road for laying of pipes or UG cables, including returning filing in, well ramming & removal of surplus spoil to a distance not exc. 50 mtrs & repairs to road surfaces to match with existing specification after laying the pipes/cable etc. all as specified & directed.

S&F GI tubing midium grade 40mm dia using water supply including provisioning of suitable fittting mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles including taking out old broken GI pipes, complete all as specified and as directed by Engr-in-Charge.

S&F GI tubing light grade 50mm dia along the wall/in trenches/in duct/in culvert/road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holding of GI pipe alongwith poles including taking out old broken GI pipes, complete all as specified and as directed by Engr-in-Charge.

S&F LT cable joint kit straight through heat shrinkable complete with jointing materials suitable for LT Armoured cable 4 core of size 10 to 50 Sqmm all as directed.

S&F LT cable joint kit straight through heat shrinkable complete with jointing materials suitable for LT Armoured cable 4 core of size 70 to 120 Sqmm all as directed.

S&F AL thimbles in replacement suitable for under ground LT cables of following sizes including cutting of exsting burn/dammaged cable after disconnecting from exsting position ,extending the cable from cable loop including neccesory earth work and reconnecting the same. of Size of 16 Sqmm

All as per Item No. 99 but size 25 Sqmm

All as per Item No. 99 but size 70 Sqmm

All as per Item No. 99 but size 95 Sqmm

S&F PVC insulated sheathed service wire twin core 10 Sqmm aluminium solid conductor 1100 volts grade incl taking down old unserviceable one complete all as specified and directed. .

Supply and fixing change over switches off-load 400 Amps 4 pole sheet metal encloser complete all as specified and directed.

Supply and Fixing MCCB 400 Amps 4 pole 36 KA with adjustable thermal and fixed magnetic setting, fixed in repairs complete all as specified and directed.

Supply and Fixing MCCB 250 Amps 4 pole 36 KA with Sheet metal encloser with adjustable thermal and fixed magnetic setting, fixed in repairs complete all as specified and directed.

Supply and Fixing MCCB 200 Amps 4 pole 36 KA with Sheet metal encloser with adjustable thermal and fixed magnetic setting, fixed in repairs complete all as specified and directed.

Supply and Fixing MCCB 160 Amps 4 pole 36 KA adjustable thermal and fixed magnetic setting, complete all as specified and directed.

Supply and fixing in repair LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including making electric connections using two run of 1.5 sqmm single core unarmoured wire from junction box, fixed in repairs,CA No also engaved on street light complete all as specified and as directed by Engr-in-Charge.

Supply and fixing in repair LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including making electric connections using two run of 1.5 sqmm single core unarmoured wire from junction box, fixed in repairs,CA No also engaved on street light complete all as specified and as directed by Engr-in-Charge.

Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including making electric connections using two run of 1.5 sqmm single core unarmoured wire from junction box, fixed in repairs,CA No also engaved on street light complete all as specified and as directed by Engr-in-Charge.

Supply and pouring transformers oil for transformer 63 to 500 KVA topping with the die electric strength of 45 KV complete all as specified and directed.

M&L for top cover gasket as per required size of 63 to 500 KVA transformer complete all as specified and directed.

M&L for LT bushing gasket as per required size of 62 to 500 KVA transformer complete all as specified and directed.

Aluminium conductor, steel reinforced of any size on LT Poles including straining,binding with insulators with Al/copper binding wire with insulators as in OH conductors, providing PVC Sleeves for jumper and entire satisfaction of Engnr-in-Charge complete all as specified and directed .

Cutting wild grasses,bushes,creepers,unwanted vegetations, etc. from surrounding poles/stays including cleaning cripper climbed on poles as and when directed and removing the spoil and deposit where directed (size of cutting 90x90 cm around pole/stay) entire satisfaction of Engnr-in-Charge complete all as specified and directed . Note:- The Item shall be operated maximum three times in the entire period of the contract.

Trimming of tree branches to clear the HT/LT OH lines girth of tree branches exc 25 mm and not exc 50 mm and stacking the materials where directed to a distance not exc 50 mtr and clearing the site upto entire satisfaction of Engnr-in-Charge complete all as specified and directed .

All as per Item No-117 here-in-before ,but girth of tree branches exc. 51mm and not exc.100 mm.

S & F 20 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.

S & F 25 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc .) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.

S & F 40 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.

S & F 50 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge.

S & F 100 mm bore steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down old unserviceable pipe any type complete all as specified and as directed by Engr-in-Charge. Note for item no. 120 to 124: Excavation and earth work shall be measured and paid seperately under relevant items

M& L for MS/CI/DI fittings such as collar, bends, any type, any dia, any radius upto 150mm bore size, any angle, double end socketted or double flanged or spigot & socket, tail pieces, all socketed or all flanged with an equal & other end tapering bellmouth or flanged plates, connecting pieces straight, both end flanged or socketed of socket & flanged & spigot ends or bellmouth tailpieces, one end flanged & other end spigot or socket or tatering as bell mouth or flanged, caps blank flanges heavy duty suitable for mechanical joint/flanged joint with and including taking down old fitting of any type and any size all as specified & directed by Engineer In Charge Note: Certifiacte for Weight of fitting by the manufacturere shall be submitted before payment.

M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 100 mm bore dia of CI/DI pipe complete all as specified and as directed.

M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 150 mm bore dia of CI/DI pipe complete all as specified and as directed.

Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 20mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge

Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 25mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge

Gun-metal, globe or gate valves, ISI marked, with iron wheel head, screwed both ends for iron pipe of size 50mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge

Bib taps , fancy type cast copper alloy, chromium plated, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule for bore of pipe 15 mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge

Attending day to day emergency breakdowns / complaints of damaged water supply lines of 15 mm to 150 mm bore in distribution system and restoration of water supply by stopping the leakage occured by deputing skilled /semi skilled man power for smooth functioning of water supply, complete all as specified and directed by Engineer-in-Charge.

Note for serial item No. 131 : - (a) Up to 0.50 Cum of the earth work shall be included in the job & more than 0.50 Cum shall be measured and paid separately. (b) The complaint / breakdown shall be rectified by the contractor within 24 Hours. Any delay thereafter, recovery at double the rate quoted per job shall be deducted from the dues of contractor by the Enginer-in-charge without any notice. (c) A proper record of complaint slip shall be maintained by the Engineer-in-Charge for making the payment against these items and recovery if any in case of failure of attending and rectifying the complaint within 24 hours. (d) Two pipe fitter and two helper with required T&P shall always be made available for attending complaints. (e) All material such as bends,unions,nipple,tees,sockets and all other items rate includes each job.MES not given any material and not paid separately

Supply and fixing and testing CI sluice valves, 100 mm dia, both ends flanged and drill in with brass spindle and brass check nuts, hand wheel made out of CI complete suitable for tested hydrostatic pressure 15 Kg/Sqcm. (PN 1.6) and confirming to IS 780, including taking out of existing unserviceable valve complete all as specified and directed by Engineer-in-Charge.

Switch air break gang operated triple pole mechanically operated from ground level mounted on 15 Nos insulators and steel frame out door type switch for vertical installation single break provided with locking arrangement consisting of MS channel HT pole type with drop out fuses (explusion fuse) of 25 Amps - 03 Nos operating rod of 25 mm dia GI pipe medium grade complete conforming to IS - 1318 rated voltage 11000 volts and current rating 200 A complete all as specified and as directed.

Dismantling concrete poles/struts, any size all as specified and directed.

Dismantling cross-arms of M.S. channel or angle sections etc. complete all as specified and directed.

Dismantling insulators any type, any size complete all as specified and directed.

Dismantling air break gang operated switches vertical/horizontal mounted including insulators and operating mechanism for repair/ replacement of broken/worn out components and insulators etc complete all as specified and directed.

Supply and fix Lightining arresters expulsion type complete with all fittings transmission class discharge capacity 65 Kilo Amp suitable for 11000 volts complete all as specified and directed.

Supply and fix Expulsion fuse single pole of 11000 volts grade upto 100 amps capacity suitable for three phase HT supply complete all as specified and as directed

Attending emergency breakdown complaints of external electrification/no light nature in certain portion of building including checking of existing tapping points,GODs ,fuse,connectors,tracing loose connections if any at Transformers,LT/HT Panels,DG Set panels.etc including carrying out minor/major repairs etc as required to make the item functional and replacing burnt/unserviceable parts, tightning of loose connections etc all as specified and restoring electricity complete and smooth all as specified and directed by Engineer-in-charge.Note- Contractor has to deploy Qualified Electrician and Helper with all necessary tools to attend the fault within one hour of the fault intimated by JE/Engineer-in-charge telephonically to the contractor or in person and complaint/fault will be rectified within eight hours of the intimation time.In case of failure to rectify the complaint or for not attending the complaint recovery will be made five times of the rate quoted by the Contractor. Note : (a) Contractor shall provide his tadesmen/labour along with necesary tools to rectify defects within one hour of intimation by JE/Engineer-in-charge and will rectify the fault within eight hour of intimation. (b) One complaint shall be considered as Each Job. (c)The contractor shall employ ITI holder electrician & semi skiilled helper to attend complaits, with proper uniform as finalised by Engr-in-Charge, with name tag. (d) Material required for attending complaints will be given as supply only item. (e) Any parts required to be replaced shall be replaced and paid separately as "supply only " against relevant item (s) of this schedule.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

VIDHATA ELECTRICALS (BID ID -3469698)

M/S VIDYA ENTERPRISES (BID ID -3471994)