Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹37.3 L+₹5.5 L (17.2%)Rejected-Finance 24 25 MANGAL ARCADE TELCO ROAD OPP HOTEL DOUBLE TREE MOHAN NAGAR CHINCHWAD PUNE 411019 | PUNE | MAHARASHTRA | 411019 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹40.0 L+₹8.2 L (25.8%)Rejected-Finance FLAT NO 203 SEC 14 PLOT NO 142 SHIVSRUTI PARK APARTMENT E WING 1ST FLOOR MOSHI PRADHIKARAN TAL HAVELI DIST PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹40.9 L+₹9.1 L (28.6%)Rejected-Finance | L4 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KIRKEE
GE CENTRAL KIRKEE RANGE HILLS ROAD KIRKEE PUNE-411003
REPAIRS AND MAINTENANCE TO WATER SUPPLY DISTRIBUTION SYSTEM AND ALLIED WORKS AT BEG AND CENTRE AND DEPOT BN INSTALLATIONS OF AGE EM I C KIRKEE UNDER GE CENTRAL KIRKEE.
2022_MES_534849_1
8664/E8 OF 2022-2023
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
BEG AND CENTRE area
Class D Category a(ii)
7 documents required · 7 mandatory
₹500
Yes
GE CENTRAL KIRKEE
₹80,000
Yes
22 Aug 2022
30 Jun 2022
28 Jul 2022
30 Jun 2022
26 Jul 2022
14 Jul 2022
30 Jun 2022 - 13 Jul 2022
Amount
Excavation in trenches n.exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for laying of pipes etc and getting out in soft / loose soil complete all as specified and as directed.
Excavation in trenches n.exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for laying of pipes etc and getting out in road cuttings / hard dense soil complete all as specified and as directed.
Removing surplus soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and as directed.
Returning filling in trenches including spreading, leveling, watering and well ramming in layers n.exc. 25 cm thick complete all as specified and as directed.
Taking up cast iron water mains (including all fittings) of 80mm bore dia of pipe with spigot and socket ends from trenches complete all as psecified and as directed.
Taking up cast iron water mains (including all fittings) of 100mm bore dia of pipe with spigot and socket ends from trenches complete all as psecified and as directed.
Taking up cast iron water mains (including all fittings) of 150mm bore dia of pipe with spigot and socket ends from trenches complete all as psecified and as directed.
Taking up cast iron water mains (including all fittings) of 200mm bore dia of pipe with spigot and socket ends from trenches complete all as psecified and as directed.
Taking up cast iron water mains (including all fittings) of 250mm bore dia of pipe with spigot and socket ends from trenches complete all as psecified and as directed.
Taking up cast iron water mains (including all fittings) of 300mm bore dia of pipe with spigot and socket ends from trenches complete all as psecified and as directed.
Cutting cast iron pipes in position for insertion of fittings, mechanical joints for 80mm bore dia of pipe complete all as specified and as directed.
Cutting cast iron pipes in position for insertion of fittings, mechanical joints for 100mm bore dia of pipe complete all as specified and as directed.
Cutting cast iron pipes in position for insertion of fittings, mechanical joints for 150mm bore dia of pipe complete all as specified and as directed.
Cutting cast iron pipes in position for insertion of fittings, mechanical joints for 200mm bore dia of pipe complete all as specified and as directed.
Cutting cast iron pipes in position for insertion of fittings, mechanical joints for 250mm bore dia of pipe complete all as specified and as directed.
Cutting cast iron pipes in position for insertion of fittings, mechanical joints for 300mm bore dia of pipe complete all as specified and as directed. NOTE FOR Sl ITEM No. 11 to 16 :- Fittings shall be measured and paid seperately.
Laying only 80 mm bore CI pipes with spigot and socket ends laid in trenches including thorough cleaning of old CI pipe by descaling internally with steel brushes equal to bore of pipe, scraping washing properly complete all as specified and as directed. NOTE:- Serviceable pipes as obtained from Sl Item No 5 shall be reused.
Laying only 100 mm bore CI pipes with spigot and socket ends laid in trenches including thorough cleaning of old CI pipe by descaling internally with steel brushes equal to bore of pipe, scraping washing properly complete all as specified and as directed. NOTE:- Serviceable pipes as obtained from Sl Item No 6 shall be reused.
Laying only 150 mm bore CI pipes with spigot and socket ends laid in trenches including thorough cleaning of old CI pipe by descaling internally with steel brushes equal to bore of pipe, scraping washing properly complete all as specified and as directed. NOTE:- Serviceable pipes as obtained from Sl Item No 7 shall be reused.
Laying only 200 mm bore CI pipes with spigot and socket ends laid in trenches including thorough cleaning of old CI pipe by descaling internally with steel brushes equal to bore of pipe, scraping washing properly complete all as specified and as directed. NOTE:- Serviceable pipes as obtained from Sl Item No 8 shall be reused.
Laying only 250 mm bore CI pipes with spigot and socket ends laid in trenches including thorough cleaning of old CI pipe by descaling internally with steel brushes equal to bore of pipe, scraping washing properly complete all as specified and as directed. NOTE:- Serviceable pipes as obtained from Sl Item No 9 shall be reused.
Laying only 300 mm bore CI pipes with spigot and socket ends laid in trenches including thorough cleaning of old CI pipe by descaling internally with steel brushes equal to bore of pipe, scraping washing properly complete all as specified and as directed. NOTE:- Serviceable pipes as obtained from Sl Item No 10 shall be reused.
Material and labour for Ductile iron fittings such as bends (any type, radius and angle), tapers any type (straight, bend, incresing, decreasing or double socket etc.), Tee piece, single branch 'Y'junction, double branch, collar etc., caps and plugs etc. as per IS: 9523-2000 of class K-7, with internal cement mortor lining, and external zinc and black bitumen coated of dia upto 150 mm bore complete all as specified and as directed.
All as per Sl Item No. 23 here-in-before but dia of 200 mm to 300 mm bore.
Material and labour for fabrication pipe junction Y/T/cross or other shape with MS structural pipe with flanged end, dia-200 mm, thickness-6.35mm, length as per site requirement all as specified and directed by Engr-in-charge.
Supply, laying, jointing and testing Ductile iron K7 class with spigot and socket ends of 100 mm bore dia pipe, suitable for push on rubber joint, with internal cement mortor lining, and external zinc and black bitumen coated pipes in any lengths conforming to IS:8329-2000 including rubber gasket & jointing materials as per IS:9523-2000 laid in trenches/ road/ ducts/ foot path/ on walls/ on floors complete all as specified and as directed.
All as per Sl Item No. 26 here-in-before but 150 mm bore dia.
All as per Sl Item No. 26 here-in-before but 200 mm bore dia.
All as per Sl Item No. 26 here-in-before but 250 mm bore dia.
All as per Sl Item No. 26 here-in-before but 300 mm bore dia.
Taking up worn out GI steel tubing including all fittings from trenches of 15 mm bore complete all as specified and as directed.
Taking up worn out GI steel tubing including all fittings from trenches of 20 mm bore complete all as specified and as directed.
Taking up worn out GI steel tubing including all fittings from trenches of 25 mm bore complete all as specified and as directed.
Taking up worn out GI steel tubing including all fittings from trenches of 40 to 50 mm bore complete all as specified and as directed.
Taking up worn out GI steel tubing including all fittings from trenches of 80 mm bore complete all as specified and as directed.
Taking up worn out GI steel tubing including all fittings from trenches of 100 mm bore complete all as specified and as directed.
Taking up worn out GI steel tubing including all fittings from trenches of 150 mm bore complete all as specified and as directed.
Laying only GI pipes of size 25 mm bore in trenches including thorough cleaning and descaling internally complete all as specified and as directed. NOTE:- Serviceable pipes as obtained from Sl Item No 33 shall be reused.
All as per item No. 38 here-in-before but GI pipe of size 40 mm bore. NOTE:- Serviceable pipes as obtained from Sl Item No 34 shall be reused.
All as per item No. 38 here-in-before but GI pipe of size 50 mm bore. NOTE:- Serviceable pipes as obtained from Sl Item No 34 shall be reused.
All as per item No. 38 here-in-before but GI pipe of size 80 mm bore. NOTE:- Serviceable pipes as obtained from Sl Item No 35 shall be reused.
All as per item No. 38 here-in-before but GI pipe of size 100 mm bore. NOTE:- Serviceable pipes as obtained from Sl Item No 36 shall be reused.
All as per item No. 38 here-in-before but GI pipe of size 150 mm bore. NOTE:- Serviceable pipes as obtained from Sl Item No 37 shall be reused.
Supply, fix and laying in trenches / fixed to wall upto 15mtr height, galvanised steel water tubing 15 mm bore, medium grade with and including all medium grade fittings complete all as specified and as directed.
All as per Sl Item No. 44 here-in-before but of size 20 mm bore.
All as per Sl Item No. 44 here-in-before but of size 25 mm bore.
All as per Sl Item No. 44 here-in-before but of size 40 mm bore.
All as per Sl Item No. 44 here-in-before but of size 50 mm bore.
All as per Sl Item No. 44 here-in-before but of size 80 mm bore.
All as per Sl Item No. 44 here-in-before but of size 100 mm bore.
All as per Sl Item No. 44 here-in-before but of size 150 mm bore.
Supply, fix and laying in trenches / fixed to wall HDPE pipe of 15 mm bore and including all fittings complete all as specified and as directed.
All as per Sl Item No. 52 here-in-before but of size 20 mm bore.
All as per Sl Item No. 52 here-in-before but of size 25 mm bore.
All as per Sl Item No. 52 here-in-before but of size 40 mm bore.
All as per Sl Item No. 52 here-in-before but of size 50 mm bore.
Material and labour for taking apart and re-assembling stuffing box of sluice valve, stainless steel spindle in position for any type and size of sluice valve and replacement of gland packings complete all as specified and as directed. NOTE:- (i) Nuts, bolts and washers whenever required new shall be measured and paid separately under relevant items of this BoQ as supply only.
Supply and fix in repairs CI body non raising spindle sluice valve with cast iron wheel of size 80 mm bore, class PN-1.6 with stainless steel spindle, brass nut, both ends flanged conforming to IS-14846, fixing with nuts, bolts, washers, rubber gasket etc complete in position of pipe line all as specified and as directed. NOTE:- (i) Nuts, bolts and washers wherever required new shall be measured and paid separately under relevant items of this BoQ as supply only. (ii) Rubber gusket shall be deemed to be included in the quoted rate of this item.
All as per Sl Item No.58 here-in-before but size 100 mm bore.
All as per Sl Item No.58 here-in-before but size 150 mm bore.
All as per Sl Item No.58 here-in-before but size 200 mm bore.
All as per Sl Item No.58 here-in-before but size 250 mm bore.
All as per Sl Item No.58 here-in-before but size 300 mm bore.
Labour only for dismantling and taking out carefully sluice valve head with gate, spindle and stuffing box of size 80 mm to 300 mm bore in position, replacement of worn out stainless steel spindle and nuts with new stainless steel spindle and nuts for sluice valve class PN 1.0, and refixing gate, spindle, nut, valve head with stuffing box including necessary PTFE gland packing, nuts, bolts, washers, gland bolts, rubbers gaskets etc complete all as specified and as directed. NOTE:- (i) Stainless steel spindle, nuts new shall be measured and paid separately under relevant items of this BoQ as supply only. (ii) Nuts, bolts & washers wherever required snew shall be measured and paid separately under relevant items of this BoQ as supply only. (iii) PTFE gland packing and rubber gasket shall be deemed to be included in the quoted rate of this item.
Supply only stainless steel spindle suitable for sluice valve class PN 1.6, 80 mm bore dia complete all as specified and as directed.
Supply only stainless steel spindle suitable for sluice valve class PN 1.6, 100 mm bore dia complete all as specified and as directed.
Supply only stainless steel spindle suitable for sluice valve class PN 1.6, 150 mm bore dia complete all as specified and as directed.
Supply only stainless steel spindle suitable for sluice valve class PN 1.6, 200 mm bore dia complete all as specified and as directed.
Supply only stainless steel spindle suitable for sluice valve class PN 1.6, 250 mm bore dia complete all as specified and as directed.
Supply only stainless steel spindle suitable for sluice valve class PN 1.6, 300 mm bore dia complete all as specified and as directed.
Supply only stainless steel nut suitably threaded internally as per spindle thread and to the size of wedge of valve gate suitable for sluice valve of 80 mm bore class PN 1.6 complete all as specified and as directed.
Supply only stainless steel nut suitably threaded internally as per spindle thread and to the size of wedge of valve gate suitable for sluice valve of 80 mm bore class PN 1.6 complete all as specified and as directed.
Supply only stainless steel nut suitably threaded internally as per spindle thread and to the size of wedge of valve gate suitable for sluice valve of 100 mm bore class PN 1.6 complete all as specified and as directed.
Supply only stainless steel nut suitably threaded internally as per spindle thread and to the size of wedge of valve gate suitable for sluice valve of 150 mm bore class PN 1.6 complete all as specified and as directed.
Supply only stainless steel nut suitably threaded internally as per spindle thread and to the size of wedge of valve gate suitable for sluice valve of 200 mm bore class PN 1.6 complete all as specified and as directed.
Supply only stainless steel nut suitably threaded internally as per spindle thread and to the size of wedge of valve gate suitable for sluice valve of 300 mm bore class PN 1.6 complete all as specified and as directed.
Supply and fix in repairs gun metal gate valve with iron wheel head, screwed both ends for iron pipes 15mm bore complete all as specified and as directed.
All as per Sl Item No. 77 here-in-before but of size 20 mm bore.
All as per Sl Item No. 77 here-in-before but of size 25 mm bore.
All as per Sl Item No. 77 here-in-before but of size 40 mm bore.
All as per Sl Item No. 77 here-in-before but of size 50 mm bore.
All as per Sl Item No. 77 here-in-before but of size 80 mm bore.
Supply and fix in repairs cast Iron swing check non return valve conforming to IS : 5312 (Part I) of 1969, both ends flanged with rubber gasket, nuts, bolts and washers of sizes suitable for 80 mm bore dia complete all as specified and as directed. NOTE :- Nuts, bolts and washers wherever required new shall be measured and paid separately under relevant items of this BoQ as supply only.
Supply and fix in repairs cast Iron swing check non return valve conforming to IS : 5312 (Part I) of 1969, both ends flanged with rubber gasket, nuts, bolts and washers of sizes suitable for 100 mm bore dia complete all as specified and as directed. NOTE :- Nuts, bolts and washers wherever required new shall be measured and paid separately under relevant items of this BoQ as supply only.
Supply and fix in repairs cast iron foot valve conforming to IS : 4038, with flanged ends, rubber gasket, nuts, bolts and washers of sizes 80 mm bore complete all as specified and as directed. NOTE :- Nuts, bolts and washers wherever required new shall be measured and paid separately under relevant items of this BoQ as supply only.
Supply and fix in repairs cast iron foot valve conforming to IS : 4038, with flanged ends, rubber gasket, nuts, bolts and washers of sizes 300 mm bore complete all as specified and as directed. NOTE :- Nuts, bolts and washers wherever required new shall be measured and paid separately under relevant items of this BoQ as supply only.
Supply only rolled mild steel as in screw bolts (machine made) with hexagonal heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal nut, n.exc. 10 cm long , 10 to 20 mm dia of neck complete all as specified and as directed.
Supply and fix mild steel mechanical joint with rubber, washer, mild steel screw bolts (machine made) with screwed both ends of dia as per flange hole and required length each screwed end to be fitted with washers and one hexagonal nut suitable for bore of pipe 80mm dia complete all as specified and as directed.
All as per Sl Item No. 88 here-in-before but suitable for bore of pipe 100 mm dia.
All as per Sl Item No. 88 here-in-before but suitable for bore of pipe 150 mm dia.
All as per Sl Item No. 88 here-in-before but suitable for bore of pipe 200 mm dia.
All as per Sl Item No. 88 here-in-before but suitable for bore of pipe 250 mm dia.
All as per Sl Item No. 88 here-in-before but suitable for bore of pipe 300 mm dia.
Material and labour for plastering 10mm thick in CM(1:4) on fair faces of brick work or concrete surfaces finished even and fair including taking down existing plastering of any description, racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
Material and labour for plain cement concrete,(1:3:6), type-C2, using 40mm graded stone aggregate as in foundation, filling and mass concrete including necessary form work werever required and including demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.
Material and labour for rolled mild steel framed work with ends of bars shouldered, welded or riveted or forced into spikes, framed guard bars, ladders, framed balusters, walk ways, railings, gates, frame work of water tank, valvepit and similar work conforming to Fe-290.Gde-E-165 including painting with one coat of red oxide primer and two coats of anticorrosive black bituminous paint including dismantling mild steel work of any description not otherwise specially provided for all as specified and as directed.
Supply only pure PTFE gland packing rope suitable for valves / pumps complete all as specified and as directed.
Material and labour for cleaning of sewage pump house inside area and sewage sump not more than size of 15 ft depth and 12 ft dia including collection of mud from sump by 10000 GPH honey sucker vehicle and deposit the same as per PMC guide lines complete all as specified and as directed.
Repairs / periodical maintenance of swimming pool of capacity 5 lakh gallon capacity with variable depth at BEG & centre, the maintenance shall be carried out during term break or any other dates given by the user / department complete all as directed and as specified by Engr-in-Charge comprises of the following works services :- (a) De-watering from swimming pool bed including balancing chamber of swimming pool completely by installing pump at swimming pool. (b) Cleaning of swimming pool bed, vertical walls complete (tiled surfaces) manually by using brushes, muriatic acid, caustic soda or any other cleaning agent without damaging the existing tiles, finally washing the total surfaces with fresh water and make ready for filling up with the fresh water. (c) Cleaning of balancing chamber by using mud pump, removing deposited silt from bottom of chamber, cleaning all vertical walls, removing algies and finally washing with fresh water and make ready for filling up with water. NOTE:- After carry out of maintenance, water shall be re-filled and to be made ready for swimming.
Taking out existing damaged brush from suction sweeping equipment, supply and fixing of new nylon brush (soft quality) with standard base as per manufacturer's size 1.5 feet long & 2.5 Inch wide suitable for fix with suction sweeper complete all as specified and as directed by Engr-in-Charge. MAKE :- MODY or as per existing make.
Supply and fix new nylon brush (soft quality) with wooden base of size 900X65X20mm. As per manufacturing suitable for fix with telescopic handle complete all as specified and as directed
Supply and fix rubbber gasket /packing 4mm thick suitable for valve/pump/suction sweeper complete all as specified and as directed.
Supply, fabricate and fix algae / dry leaves removing net having frame size 30cm x 30cm, made out of stainless steel pipe 19mm dia, duly fixed with nylon net as per the existing and suitable for fixing with existing telescopic handle complete all as specified and as directed.
Supply and fix nylon rope of size 20 mm dia multi stranded super flexible type and all as per specified and directed by Engr-in-charge.
Supply and fix PVC flexible green pipe for dewatering of size 50 mm dia with clamps including all acessories all as specified and as directed by Engr-in-charge.
Supply and fix PVC flexible green pipe for dewatering of size 80 mm dia with clamps including all accessories all as specified and as directed by Engr-in-charge.
Taking out existing unserviceable electrically driven induction motor of capacity upto 5 HP (as per existing make) from foundation, split opening into the parts at work shop and repair the motor by rewinding of motor with supper enamelled copper winding wire of suitable gauge / size as exists by replacing paper insulation of class F, fire proof sleeves and varnishing by cleaning of stator slots, assembling complete motor, oiling, greasing and painting with one coat of synthetic enamelled paint after cleaning and preparing surface for painting, re-installing and testing including replacement of bearings and coupler with the existing pump at site on full load complete all as specified and as directed by Engr-in-Charge.
All as per Sl Item No 107 here-in-above but capacity of motor 7.5 to 10 HP. MAKE :- Kirloskar or as per existing make.
All as per Sl Item No 107 here-in-above but capacity of motor 30 HP. MAKE :- Kirloskar or as per existing make.
Supply and fix terminal box of motor as per existing make complete all as specified and as directed.
Taking out existing unserviceable electrically driven submersible motor of capacity upto 5 HP (as per existing make) from UG sump / pond by using chain and pulley, opening into the parts at work shop and repair the motor by rewinding with super enamelled copper winding wire of suitable gauge / size as exists by replacing paper insulation of class F, fire proof sleeves, varnishing by cleaning of stator slots, assembling complete motor, sealing, oiling, greasing, painting with one coat of synthetic enamelled paint after cleaning and preparing surface for painting, re-installing, testing including replacement of bearings and coupler with the existing pump at site on full load complete all as specified and as directed.
All as per Sl Item No 111 here-in-above , but capacity 10HP to 15HP.
Repairing / servicing of 30 HP centrifugal pumping set by replacing all worn out parts such as bearing, housing, mechanical seal, shaft, shaft key, 'O' ring etc, varnishing of motor, greasing of motor bearings for making smooth functioning of pumping sets re-installed at site and testing all as directed by Engr-in-Charge. NOTE: - Spare parts will be deemed to be included in the quoted rate.
Repair /servicing of 3 HP to 7.5 HP Centrifugal pumping set by replacing all worn out parts such as bearing, mechanical seal, shaft, shaft key, 'O' ring, impeller, housing etc, varnishing of motor, greasing of motor bearings for making smooth functioning of pumping sets, re-installed at site and tesing all as directed by Engr-in-Charge. NOTE:-Spare parts will be deemed to be included in the quoted rate.
Repairs and servicing of existing pump star delta starter panels of any size and capacity by replacing unserviceable components such as contactor, relays, etc and tightening of all connecting points, cable connections including replacement of wires, push button and indicator lamp complete all as specified and as directed. NOTE :- (i) Parts such contactor, relay and timer required for replacement shall be measured and paid seperately under appropriate items of BoQ given here in after. (ii) Replacement of wires, push button and indication lamp are deemed to be included in quoted rate.
Supply and fix in repairs 3 pole power contactor AC, 415 Volts, with required NO + NC & Coil voltage 380V to 415V, suitable for upto 30HP water pump complete all as specified and as directed. MAKE :- L&T or other equivalent.
Supply and fix in repairs 3 pole power contactor AC, 415 Volt, with required NO + NC & Coil voltage 380V to 415V, suitable for upto 15 HP water pump complete all as specified and as directed. MAKE :- L&T or other equivalent.
Supply and fix in repairs thermal over load relay for 3 Phase AC motor starter, suitable for 30HP water pump, relay setting range 20.0 to 40.0 Amps complete all as specified and as directed. MAKE:- L&T or equivalent
Supply and fix in repairs thermal over load relay for 3 Phase AC motor starter, suitable for 15HP water pump, relay setting range 12.0 to 30.0 Amps complete all as specified and as directed. MAKE:- L&T or equivalent
Supply and fix in repairs electronic timer, 3 - 30 Sec, 415V complete all as specified and as directed. MAKE:- L&T, or as per existing make.
Supply and fix in repairs single phase preventor complete all as specified and as directed. MAKE:- L&T, or as per existing make.
Taking / lifting out existing unserviceable submersible pump capacity upto 5 HP, electrically driven (as per existing Make) from sump / pond using chain & pulley with tripod arrangment, carrying to workshop, opening into the parts at work shop and repairing pump by replacing housing, impeller, impeller key, washer impeller nut, deflector, shaft seal, rotar turning, grinding, segment, thrust, guide bushes, distance sleeve, neck ring, top dual bushes, coupling with sand guard etc including replacement of bearings and couple with the existing motor and lowering in same position complete pumpset at site on full load testing complete all as directed by Engr-in-Charge. NOTE :- Spare parts of pump are deemed to be included in the quoted rate.
All as per Sl Item No 122 here-in-before, but capacity 10 HP to 15 HP.
Supply only calcium based high strength chlorine for water disinfectant as in granular form in factory sealed HDPE container (40 to 50 kg each) having, chlorine concentration level not less than 65% complete all as specified and as directed. Make : Sree Rayalseema Hi- Strength Hypo Ltd or equivalent E-in-C approved makes.
Supply only copper sulphate suitable for swimming pools complete all as specified and as directed.
Supply only alum crystal, free from impurities, class I, suitable for swimming pools complete all as specified and as directed.
Supply only "O" Todoline solution for water testing purpose in 500 ml bottle complete all as specified and as directed. Make :- Nice/Glaxo or equivalent E-in-C approved makes.
Material and labour for construction of masonary valve chamber of internal size 1500mm x1000mmx800mm with 100 mm thick plain cement concrete (1:4:8), type D-2 as in foundation over 150 mm thick hard core, 200mm thick solid block masonry with solid blocks of grade C-5 built in cement mortar (1:4), plastering 15mm thick in cement and sand mortar (1:4) to internal surfaces and external surfaces up to 15cm below ground level and top of floor , finished even and smooth without using extra cement, with 3.15mm thick mild steel sheet cover including 50mm x 50mm x 6mm thick mild steel angle frame fixed in plain cement concrete (1:2:4), type B1 coping with 4 Nos of 25x6mm flat iron 150mm long as in hold fasts, handles, hinges with locking arrangements, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil, demolition of valve pit including disposal of surplus soil to a distance not exceeding 50m complete all as specified and as directed.
Supply and fix 10 sq.mm 3 core flexible copper conductor cable with flexible conduit of suitable size complete all as specified and as directed.
Supply and fix 10 sq.mm 3 core submersible copper cable with flexible conduit complete all as specified and as directed.
Supply and fix in repairs electronic water level indicator including buzzer, 5 level type, complete with sensor including sensor cable up to 50mtr distance, wiring in PVC conduit/casing and capping etc for OH tanks and UG/Semi UG water reservoir. with all accessories including dismantling / taking down un serviceable one all as specified and as directed.
Cleaning of RCC over head reservior of 1,40,000 gallon capacity internally by brushing walls, floors and thorough washing, removing all dirt, mud etc through drain out pipe complete and writing the date of cleaning and due date with suitable letter size with black paint all as specified and as directed.
Cleaning of RCC over head reservior of 50,000 gallon capacity internally by brushing walls, floors and thorough washing, removing all dirt, mud etc through drain out pipe complete and writing the date of cleaning and due date with suitable letter size with black paint all as specified and as directed.
Cleaning of RCC over head reservior of 20,000 gallon capacity internally by brushing walls, floors and thorough washing, removing all dirt, mud etc through drain out pipe complete and writing the date of cleaning and due date with suitable letter size with black paint all as specified and as directed.
Cleaning of Pressed steel water OH reservior 10,000 gallon cap internally by brushing walls, floors and through washing and removing all dirt, muds etc through drain out pipe complete and write the date of cleaning and due date with suitable letter size with black paint all as per specified and direction of Engr -in-charge. (Note: Total-02 Nos and Each Tank for one cleaning will be considered as one job ) Sylet Mess OHT -2.
Cleaning of pressed steel water reservior of 10,000 gallon capacity internally by brushing walls, floors and thorough washing, removing all dirt, mud etc through drain out pipe complete and writing the date of cleaning and due date with suitable letter size with black paint all as per specified and as directed.
Cleaning of RCC semi UG clear water sump 50,000 gallon capacity internally by brushing walls, floors and thorough washing, removing all dirt, mud by pumping out or by manuually complete and write the date of cleaning and due date with suitable letter size with black paint all as specified and as directed.
Cleaning of RCC semi UG clear water sump 25,000 gallon cap internally by brushing walls, floors and through washing and removing all dirt, muds etc by pumping out or by manuually complete and write the date of cleaning and due date with suitable letter size with black paint all as per specified and direction of Engr -in-charge. (Note: Total Semi UG Sump-03 Nos, Each Semi UG Sump for one cleaning will be considered as one job )
Material and labour for cleaning of MES water supply installations / campus of BEG shylet mess PH approx area 2500 sqm by surface dressing or trimming of natural ground to remove small unequalities n.exc. 15 cm deep, including removing vegetation / shrubs / brush wood / under-growth, cleaning of drains and carrying away the rubbish to a distance n.exc. 50 mtr complete all as specified and as directed.
All as per Sl Item No. 139 above but TB-I old PH approx area 1500 sqm.
All as per Sl Item No. 139 above but BEG Dhobhi ghat PH approx area 1500 Sqm
All as per Sl Item No. 139 above but BEG PH Depot Bn OHT area approx area 2000 Sqm
All as per Sl Item No. 139 above but TB-I MAP PH approx area 1500 sqm
All as per Sl Item No. 139 above but Sewage pump house approx area 200 Sqm
Material and labour for taking out and relaying any type of HDPE pipe from trenches of size 150 mm to 200 mm diameter along with new fittings and accessories required for jointing in existing or new locations including cleaning complete all as specified and as directed.
Supply, fix and laying of CPVC pipe of size 25mm diameter incluing all fittings and accessories and taking unservice pipe complete all as directed by the Engr -In-Charge
Repairs/replacement of GI fittings such as 'T', bend, elbow, reducer, socket, union and barral piece of size 15 mm to 25 mm dia as per site requirement complete all as specified and as directed. NOTE:- The quoted rate is deemed to be included the cost any one of the GI fitting as stated above including replacement charges of the same.
All as per Sl Item No. 147 here-in-before but of size 40 to 50 mm bore.
All as per Sl Item No. 147 here-in-before but of size 80 to 100 mm bore.
Material and labour for painting of pressed steel water tank 10,000 gallons capacity complete to all internal and external surfaces comprising of four Nos side wall, floor, roof and all internal bracings, supports of steel water tank with one coat of aluminium paint as priming (drinking water quality) and one finishing coat comprising of total two coats of aluminium paint all as specified and as directed.
Material and labour for painting of pressed steel water tank 10000 gallons capacity including removing of old painted rust, dirt, fungus, complete from structure of 18 mtr steel staging pressed steel water tank 10,000 gallons capacity one coat of aluminium paint as priming (drinking water quality) and one finishing coat comprising of total two coats of aluminium paint to all internal and external surfaces comprising of four Nos of side wall, floor, roof and all internal bracings, supports of steel water tank all as specified and as directed. NOTE :- Safety measurements and necessary T&P will be provided by contractor without any extra cost to govt.
Supply and fix in replacement of heavy duty automatic star delta starter, type DX-P with robust 4 pole contactor & LR1D OLR, electronic star delta Timer in stainless steel S.S. enclosure (Motor rating AC-3 Duty , 415 Volt, 50Hz, 3Ph) of size 30 HP 415 volts , Relay range 23-32 Amps complete all as specified and as directed. MAKE:- C&S Cat part No BE3-DXP204-314 or equivalent to L&T/BCH
Supply and fix in replacement of Heavy Duty Automatic Star Delta Starter Type DX-P with robust 4 Pole Contactor & LR1D OLR, Electronic Star Delta Timer in S.S. enclosure (Motor rating AC-3 Duty , 415 Volt, 50Hz, 3Ph) of size 12 HP 415 volts , Relay range 07-10 Amps complete. Make :- C&S, cat part No BE3-DXP204-314 or equivalent to L&T/BCH
Supply and fix in replacement of heavy duty DOL Starter, type DX-P with robust 4 pole contactor & LR1D OLR in stainless steel enclosure (motor rating AC-3 duty, 415 Volt, 50Hz, 3Ph) of size suitable upto 7.5 HP, 415 volts, relay range 09 -14 Amps complete all as specified and as directed. MAKE :-- C&S Cat part No BE1-DXP204-316 X or equivalent to L&T/BCH.
Supply and laying in replacement of old/un serviceable HDPE pipe in trenches / fixed to wall /on surface, PN-6 , DN-90, SDR-13.6, IS 4984 CM/L-7600128415 of size 90 mm bore and including all fittings, connectors, clamps, flange joints etc to connect existing submersible motor including taking out complete all as specified and as directed.
Supply, fix and laying of HDPE pipes in trenches of size 200 mm dia, HDPE pipe, PN-6, DN-200, SDR-17, IS :498412016 CM/L-8580589 along with new fittings and accessories required for joining in existing or new locations including all necessary tools and plants including items required for heating/bonding etc complete taking out from trenches all as specified and as directed.
Supply and fix in repairs cast iron air release valve 50 mm dia conforming to IS : 5312 (Part I) of 1969, with both ends flanged complete all as specified and as directed. NOTE :- Nuts, bolts & washers wherever required new shall be measured in appropriate item as supply only.
Material and labour for spray painting of motor and pump with two coats of Anti corrosive paint over a coat of red oxide primer for capacity 10HP to 30 HP complete all as specified and as directed.
Material and labour for spray painting of motor and pump with two coats of Anti corrosive paint over a coat of red oxide primer for capacity 3HP to 7.5 HP complete all as specified and as directed.
Supply only hydrated lime suitable for water treatment all as specified and as directed.
metro electrical services
SKS Electricals
D H L ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .