Kurinjipadi TP MLA 25-26 PD Shop Work

Amount

Earth work excavating and deposting on bank with initial lead of 10m& intial lift of 2m in hard stiff clay, stiff black cotton, hard red earth shales ,murram, gravel, stoney earth mixed with small size boulders etc completed as per std specification.SS20B

Collection supply and filling of Stone Dust filling approved quarry including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.

Plain Cement concrete of mix 1:4:8 (One part of cement, four part of sand and eight part of aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour chargesetc., complete as per standard specification

Steel centering for sides and soffits including supports and strutting upto 1m height for plain surface such as RCC slab with all cross bracings using mild steel sheet of size 90cmx60cmx10 gauge stiffened with welded miled steel angles of size 25x25x6mm for laid over silver oak for coundary wood joints of size 10x6.5 cm spaced at about 90cm centre to centre and supported by casurials props of 10cm to 13 cm dia spaced at about 75cm centre to centre and suppor etc completed as per std specification.

For coloum upto Litel and Roof

For beams

For beams

Reinforcement Cement Concrete 1:11/2:3 using 20 mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and fabricating charges, centering and shuttering but icluding curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams, etc., shall be finished smooth with cement mortar 1:3, 12mm thick and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications..

Supplying and Fabricating and placing in position MS Steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and blinding wire all floors etc., complete complying with standard specification.

Brick work in CM 1:5 mix using country bricks ground moulded of size 23 x 11 x 7 Cm for the following including curing etc., complete complying with standard specifications.

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS HBG metal to -50mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc, complete.

Floor finishing with ceramic tiles of size 305*305*6 mm colour tiles with design laid in cement morter 1:3 usig 20mm thick and pointing with same colour cement of 3kg including cost and conveyance of all materials to side and all labour charge etc complete

dadooing the sides of walls up to requried height with est approved qualiting colour printed glazed tiles of size 150*150*6 mm and set in CM 1:2 using 10 mm thick and pointing with same colour cement of 4kg including cost and conveyance of all materials.

Plastering with CM 1:5, 12mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Ceiling Plastering with cement mortar 1:3 mix to 10 mm thick for R.C.C. Items including cost and conveyance of all materials to site and all labour charges etc complete

Supplying and fixing of cuddapah slab including all charges etc complete.

supply and fixing of water clost wit p trap

Supply and fixing of CP screw down tap

PVC 4'' dia pipe

RCC precast rings

Rcc precast cover slab

Supply of steel doors and windows and follows

Rolling Shutter 1.80 x 2.40 m

Rolling Shutter 2.1 x 2.40 m

Door 1.00 x 2.10 m

Ventilator 0.90 x 0.60 m

Painting two coat with cement paint approved quality and exteriorcement paint over the plastered surface including cost and all other charges etc.,

Painting TWO coats of new iron works such as steel doors, windows,ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing following electrical arrangement

light point

bulk head

Tube light fitting

fan fitting

run off

service pipe

DPIC BOX

3 pin point

Earthing

provision for water tank 1000 liters and accerosies

Proision Of Name Board

A.STALIN (BID ID -1362280)