Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC A SECTOR BHAGWATI BHAVAN VIJAY NAGAR LAL GHATI BHOPAL M P 462030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹27.6 L+₹1.0 L (3.90%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹33.0 L
EMD Value
₹65,900
Closing Date
20 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BHOPAL
GE BHOPAL BAIRAGARH BHOPAL
SPL REP TO BLDG NO P 106 12 SRW AND ADDITION ALTERATION TO BLDG NO P 48 NCC OFFRS MESS DGNCC 29 AT SI LINES UNDER GE BHOPAL
2023_MES_576244_1
8960/E8
Open Tender
Civil Works
Item Rate
183 days
BHOPAL
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE BHOPAL
₹65,900
Yes
17 Mar 2023
20 Jan 2023
22 Feb 2023
20 Jan 2023
20 Feb 2023
3 Feb 2023
Amount
Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline
Taking down chowkats or frames exc 1.50 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.
Demolition of brick work or stone masonery built in cement mortar complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Taking down cement plaster, terrazzo/cement dado, skirting etc of any description on brick/stone walls, concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Demolition of Cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp,insultion, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Formwork to chajjas, troughs and similar items including edges rough finished complete all as specified and directed.
M&L for Formwork to fins, louvers, fascia with rough finished surfaces complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10 cm wide complete all as specified and directed.
M&L for cement concrete 1:2:4 type B0 (using 12.5 mm nominal size graded crushed stone aggregate) mixed with water proofing compound as levelling course of roof padding finished even and fair complete all as specified and directed. Note:- Water proofing compound shall be measured and paid for separately.
M&L for RCC 1:1.5:3 type A1 (using 12.5 mm graded aggregate) (Nominal mix) in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and directed.
M&L for Brick work with Flyash bricks, straight or curved on plan to any radius in half brick thick walls using modular bricks build in CM 1:4 complete all as specified and directed.
M&L for brick work with fly ash bricks in CM 1:6 using modular bricks straight or curved on plan to any radius complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick wall surface finished even and smooth without using extra cement mixed with water proofing compound all as specified and directed. (water proofing compound measured and paid seperately)
M&L for 10 mm thick rendering in CM 1:3 on fair face of brick/ concrete surfaces as in ceiling complete all as specified and directed.
Supply only Integral water profing compound complete all as specified and directed.
S&F chicken wire mesh, mild steel 12mm mesh size and 0.56mm dia of wire complete all as specified and directed.
M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete etc as specified and directed.
M&L for hard core of broken stone /boulder, broken to gauge nexc 63 mm complete all as specified and directed
M&L for vitrified Ceramic light shade tiles 10mm thick (square/rectangular) polished, area of each tiles n exc 0.36 sqm , in floorslaid by using 3mm spacer and jointed in neat cment slurry and and pointed in epoxy mortar to match over and including 20mm thick screed bed in cm 1:6 complete all as specified and directed.
All as per item No 24 above but on vertical surface over and including 15mm thick backing coat of plaster in CM 1:4
M&L for tiles cleaning by using appropriate chemical of approved make with using prescribed machine also as necessary to remove stain/ dust etc and maintain beauty of tiles in OTM /MD Accn in the area of AGE B/R-I complete all as specified and directed.
M&L grinding and polishing kota/marble/terazoo/mosaic flooring all as directed and specified.
M&L for Granite work 18-20 mm thick (of any type/ colour) (table rubbed and polished/ moulding) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing n white cement (1:2) using marble dust with admixture of pigment to mactch with shade or granite and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Supplying, fabricating and fixing powder coated (minimum thickness 50 micron) aluminium sections of required size for door windows frames shutters and partitions including aluminium hinges of required size jointing cleats, screws sash fasteners, plug for fixing with walls, columns, etc complete all as specified and directed.
S&F solar control film 25 micron reflective type sticked to glass pain as per instruction of manufactures complete all as specified and directed.
S&F Sheet glass 4 mm thicknexc 0.5 Sqm in each pane fixed in aluminium/wooden frame complete all as specified and directed.
S&F Sheet glass 4 mm thick area excd 0.5 Sqm in each pane fixed in aluminium/wooden frame complete all as specified and directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and directed.
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
S&F in repairs 25 mm dia Stainless steel curtain rod decorative type incl curtain rings & nobs complete all as specified and directed.
S&F in repair 18mm /19mm thick block boards, interior grade commercial type fixed with screw plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed.
S&F 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed by Engr-in-charge
S&F 0.6 mm thick decorative laminate type 1, of surface finish, white color and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.
S&F stainless steel Auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment +_ 2.50mm & depth adjustment 4mm complete all as specified. Make : Godrej / Hettich.
M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering,doors, etc to be prepared for hanging or sliding with and including either hooks and hingsor steel hanging door fittings(including of steel sheeting or other covering.(Fe-410-W(Gde-E250) complete all as specified and directed.
S&F magnetic catches for cupboards with plastic body and striking plate not less than 40mm including letting in and fixed complete all as specified and directed.
S&F 75mm brass handle, cast type, polished bright complete all as specified and directed.
S&F 40mm wide of flap continuous (piano) hinges, brass , bright finish complete all as specified and directed.
M&L 1 mm thick, one coat white cement putty on walls/ceiling all as specified and directed
M&L for preparation of newly plastered surfaces and applying three coat of white wash on ceiling complete all as specified and directed.
M&L for preparation of old decorated surfaces of ceiling and applying two coat of white wash all as specified and directed.
M&L for Preparation of new plastered surface wall and applying with two coat of Acrylic Smooth exterior paint of shade as approved by GE (applied @ 1.67 ltr/10 sqm each coat) over and including a coat of primer of exterior primer applied (@ 2.20 kg/10 sqm) complete all as specified and directed. [ Make: Apex Ultima of Asian Paint or equivalent make as per list of make]
M & L Preparation of old plastered surface wall and applying Finishing walls with Acrylic Smooth exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of cement base exterior putty primer applied @ 2.20 kg/10 sqm) [ Make: Apex Ultima of Asian Paint or equivalent make as per list of make]
M & L for applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.
Preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified.
M&L for 3mm thick wall care putty on wall complete all as specified and directed
S&F GI frame work size of grid 605 mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylong sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two eaqual flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.
S & F gypsum ceiling board, 12.5 mm thick as per IS 2095 (Part 1): 2011, tapered edge, fixing to ceiling section and perimeter channel using dry wall screws of size 3.5 mm X 25 mm at 230 mm c/c including jointing and finishing to a flush finish of tapered edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint complete all as specified and as directed.
M & L for prefabricated glass fiber reinforced gypsum beads/ cornices architecturally crafted decorated 100 mm wide and fixing complete all as specified and as directed.
M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a cot of red oxide, zinc chrome primer.
M&L for Earth work in excavation in dense soil by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
M&L for Earth work in excavation in Ordnary rock by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm onplan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
M&L PCC 1:4:8 type D-2 40mm graded stone aggregate in foundation, filling and mass concrete etc as specified and directed.
M&L for Formwork to sides of concrete foundations, footings, columns, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surface complete all as specified and directed
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.with rough finished surface complete all as specified and directed
M&L for Reinforced cement concrete (nominal mix) 1:1.5 :3 Type B1 (using 20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) 1:1.5 :3 Type B1(using 20 mm gradedaggregate) in beam cantilevers ,bressummers , lintels over 1.5 m span complete all as specified and directed
M&L for Reinforced cement concrete (nominal mix) Type B1 1:1.5 :3 (20 mm gradedaggregate) in Columns, pillars, Piers , Posts and struts complete all as specified and directed
M&L for 15mm thick rendering in CM 1:6 on fair faces of brick/concrete surfaces finished even and smooth w/o using extra cement complete all as specified and directed
M&Lfor 25mm thick cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) complete all as specified and directed
M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles over complete all as specified and directed.
M&L for glazed ceramic colour tiles, in vertical surfaces exc 0.11 sqm but n exc 0.18 sqm, 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including10mm thick CM (1:4) as in backing coat complete all as specified and directed.
S&F 4.8mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane complete all as specified and directed.
S&F 4.8mm thick plain sheet glass ordinary quality exc 0.50Sqm in each pane complete all as specified and directed.
S&F 105x60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. complete as specified made out of 1.25mm thick ms sheet complete all as specified and directed
S&F 125x60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. complete as specified made out of 1.25mm thick ms sheet complete all as specified and directed
S&F IInd class HW factory made 35 mm thick glazed and skelton shutter, open rebated and prepared to receive glass, gauges, etc ( with or without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitreated beads for securing glass, etc fixed to chowkats all as specified and directed.
S&F 40 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete and fixed to chowkats all as specified and directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed.
S&F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick prelam PVC colour moulded PVC sheet on the front face & 2mm thick prelam PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified.
S&F in repair 18mm plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed.
M&L for Cabinet Hinges Soft Close SS 8 Crank complete all as specified and directed.
S&F 300mm., ordinary MS rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F 75mm size butt hinges medium weight cold rolled mild steel.
S&F 100mm size butt hinges medium weight cold rolled mild steel.
S&F 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed by Engr in charge.
S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr in charge.
M&L for 20mm dia Drepary curtain rod decorative type Chromium plated mild steel tubing incl curtain rings & nobs, fixed in repair complete all as specified and directed
S&F Steel work in tubular/structural trusses, purlins, etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 or steel sections conforming to Fe 410-W (Gde E-250) quality -A complete all as specified and directed.
S&F pre-painted galvatume aluminium zinc coating GI based corrrugated steel sheet 0.50 mm thick, 150 Az of any color having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self-tapping screws on angle iron frame of each side as directed by Engr-in-Charge.
All as per item No 85 above but plain sheeting, in ridges completed all as specified and directed.
Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 incl necessary fixing to walls as directed.
S&F 15 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed.
All as per item No 88 above but 20mm bore.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth
S&F 15 mm wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed by engr in charge. Cat No: 5001B Make : Jaquar or equivalent as per list of make as approved by GE.
S&F Soap dish holder Make Jaquar Cat No 1131N or equivalent as per list of make as approved by GE.
S&F Towel ring Make Jaquar Cat No 1121N or equivalent as per list of make asapproved by GE.
S&F wash down water closet with seat cover , waste pipe, cistern with lid & fittings (complete set) and fixing complete all as per manufacturere instructions Cat No: 92045. Make Hindware or equivalent as per list of make as approved by GE.
S&F 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed by engr in charge. Cat No: 5041 Make : Jaquar or equivalent as per list of make as approved by GE.
S&F Towel rack 24 inches long with hanger, chromium plated fixing complete all as specified and directed by engr in charge. Cat No 35781 Make: Jaquar or equivalent
S&F Toilet paper holder chromium plated recessed type fixing complete all as specified and directed by engr in charge. Cat No 35751 Make: Jaquar or equivalent as per list of make as approved by GE.
S&F handshower (Health faucet) with 8mm dia 1 meter long flexible tube and wall hook fixed in repairs Cat No- 573 Make: Jaquar or equivalent as per list of make as approved by GE.
S&F looking mirror approved quality with wooden back and edge, complete polishing , fixing in repairs complete all as specified and directed.
S&F chromium plated grating doom 100 mm dia with waste hole complete all as specified and directed
S&F PVC connection 15mm size with PTMT nuts of length 600 mm fixing complete all as specified and directed by engr in charge.
S&F 15 mm stopcock (Angle valve) cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
M&L PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75mm bore complete all as specified and direcetd.
S&F in repairs 15mm wall mixture with provision for bath telephone shower and overhead shower all as specified and directed. Make. Prayag or Jaquar or equivalent.
S&F PVC(SWR) pipes 75 mm bore single socketed in any length with rubber rings joints laid in trenches
All as per item No 106 above but 110mm bore.
S&F PVC(SWR) bend of the following bore 75 mm
S&F PVC(SWR) bend of the following bore 110 mm
S&F PVC(SWR) junction single (single 'T') equal or unequal of the following bore 75 mm
S&F PVC(SWR) junction single (single 'T') equal or unequal of the following bore 110 mm
S&F PVC(SWR) Vent cowl of the following bore 75 mm
S&F PVC(SWR) Vent cowl of the following bore 110 mm
S&F glass Shelf assembly consisting of 8 mm thick sheet shelf with CP brackets guard and railing 500 mm size.
S&F corner glass Shelf assembly consisting of 8 mm thick sheet shelf with CP brackets guard and railing 300 mm size.
M&L for 150 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
Removing excavated material (soil) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point.
Removing excavated material (rock) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point.
Dismantling Asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I
S&F 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe with epoxy coated aluminium rod.
S&F in repairs gunmental, globe or gate valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed.
Taking down carefully the old U/S aluminum/Copper point wiring (light, fan, socket or power) complete fitting such as switches ,ceiling roses ,pendants, sockets, regulators, wall light fittigs , tube light fittings, surface light fitting , ceiling light fittings , any types of fittings etc and making good disturbed surfaces of walls including necessary touch up with the same finishes to surrounding wall, floors etc complete all as specified and directed by Engineer in charge .
M&L for concealed point wiring for one light or one fan or one exhaust fan controlled by one switch complete with and includidng single core PVC insulated unsheathed flexible conductor FR-LS H cables 1.5 sqmm as per IS 694:2010 ISI marked annealed multistranded copper conductor drawn through and including medium machenical strees PVC conduit as per IS 9537 (Part-III): 1983 of suitable nominal size as required at site dia but not less than 20mm noninal size including modular / non modular type all accessories/fitting / metal flush box / cover plate/junctiion boxes/ inspection cover etc ISI marked and sunk terminal boxes flush galvanised metal boxes suitable for fixing with 1.5 sqmm copper conductor PVC insulated, unsheathed flexible multistaranded copper conductor FR-LSH cable as continious earth wire connected to metalic body at one end and common earth dolly to other end including cost of cutting chase and making good to distrubed surfaces of wall with cement mortor 1: 3 including necessary plaster and poiinting in cement mortor 1:3 with white wash / distemper/ other painting complete all as specifiecd and as directed (Note cost of cutting chase and making good shall be included in the quated rates)
All as per Srl item No 126 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No 126 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No.126 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 2.5 Sqmm and 2.5 Sqmm as earth wire.complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No.126 here in before but for one switch socket combination 6 pin 5/ 15 Amps on independent board with wire of size 4.0 Sqmm and 4.0 Sqmm as earth wire.complete all as specified and directed by Engineer - in - Charge.
S & F modular switch one way 6 Amp one module, 240 volts complete all as specified and directed by Engineer - in - Charge
S & F modular bell push 6 Amp one module, 240 volts complete all as specified and directed by Engineer - in - Charge
S & F modular switch one way 16 Amp one module, 240 volts complete all as specified and directed by Engineer - in - Charge
Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6 Amps, 240 volts, controlled by one switch complete all as specified and directed by Engineer - in - Charge
Supply and fixing modular socket outlet 2-in-1, 2/3 pin, 6/16 Amps, 240 volts, controlled by one switch complete all as specified and directed by Engineer - in - Charge
S & F ceiling rose surface bakelite three terminals complete all as specified and directed by Engineer - in - Charge.
S&F in repair electric bell single phase suitable for 240 V complete all as specified and directed by Engineer - in - Charge.
Supply & fixing LED tube light complete fitting 1x18 watt 220V, AC decorative box type with driver , holder including LED tube light connecting up with three core flexible xopper conductor cable of suitable size from ceiling rose comlete all as specified and directed by Engineer in charge .
Supply & fixing LED light fitting mirror type with high out put diffuser 2 feet , 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible coppder conductor cable of suitable sixe complete all as specified and directed by Engineer in charge .
S&F angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in - Charge.
S&F LED lamp 10 Watt B22 CDL complete all as specified and directed by Engineer in Charge
Supply & fixing Recess mounting Spot LED light round downlighter designed with excellent thermally managed luminaire 12 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible coppder conductor cases of suitable size Cat part No-LDRVP-012-C Make Orient or equivqlent complete all as specified and directed by Engineer in charge
Supply & fixing Flexible LED strip uses high brightness SMD LED as the light source for indoor application only.luminaire 24 watt, 220V AC with high efficiency light complete wit driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible coppder conductor cases of suitable size Cat part No-LSTRIP-24-C Make Orient or equivqlent complete all as specified and directed by Engineer in charge
Supply and fixing modular fan regulator complete all as specified and directed by Engineer - in - Charge
S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLS stranded copper conductor drawn in surface PVC casing and caping size 20mm /PVC conduict dia 20mm including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor making good the disturbed surfaces and white wash or colour wash as per adjoining specifications , necessary junction box with covers including connections, PVC flexible pipes to be used while connecting the cable in DBs/Pannel, including taking down old unsv submain wiring complete all as specified and directed by Engineer - in - Charge. (Note : PVC cable and PVC conduit /PVC casing and caping shall be ISI marked)
Supply and fixing factory made epoxy powder coated Distribution Board TP & N 4 ways ( VTPN MCCB DB ) and space for 125 A MCCB as In comer, with metal door ( IP-43 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including Isolated Neutral Bar, Insulated busbar assembly, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts including taking down old unsv VTPN DB complete all as specified and directed by Engineer - in - Charge. Make Legrand/Schneider Note:- Rate of MCCB are excluding in the rate quoted for this item.
Supply & fix MCCB 125 Amp, 4 Pole breaking capacity 16 KA with complete electrical connections by appropriate size of copper lugs , including taking down old unsv MCCB complete all as specified and directed by the Engr-in-Charge.
S & F in repairs sheet metal enclosure double door type surface mounted concealed in wall 8 ways, 240 Volts, ISI marked 200 amps bus bar dust and vermin proof suitable for incorporation MCBs and isolators etc including taking down old unsv DB complete all as specified and directed by Engineer - in - Charge.
S & F in repairs MCB SP suitable for 240 volts, AC supply 6 to 32 Amps , with over load and short circuit protection and rupturing capacity not less than 10KA including taking down old unsv MCB SP complete all as specified and directed by Engineer - in - Charge.
S & F in repairs MCB SP suitable for 240 volts, AC supply 50 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA ,including taking down old unsv MCB SP complete all as specified and directed by Engineer - in - Charge.
S & F in repairs MCB SPN suitable for 240 volts, AC supply 6 to 32 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA , including taking down old unsv MCB SPN complete all as specified and directed by Engineer - in - Charge.
S & F in repairs MCB SPN suitable for 240 volts, AC supply 50 to 63 Amps, with over load and short circuit protection and rupturing capacity not less than 10KA including taking down old unsv MCB SPN complete all as specified and directed by Engineer - in - Charge.
Supply and fix sheet metal enclosures with socket plug top and MCB's with two pin and earth plug and socket complete with one Single pole MCB 240 V grade 25 Amp complete all as specified and directed .
S&F exhaust fan made of study Engineering plasic c omplete with louvers shutter, voltage 230V , 50HZ RPM 1200 coper swinding of sweep 250mm complete with all accessories including making hole in stone/brick wall grouting suitable size with nuts/bolts & making good in all respects complete all as specified and directed by Engineer in charge
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level, connected to galvanized earth lead 4 mm dia by means of nuts, bolts, check nuts and washers of galvanized iron along with galvanized iron protection pipe 15mm dia “medium grade” from plate to earth point all as shown in electrical plate No- 5 of SSR Part – I 2009 including alternate layer of charcoal and salt around the electrode 150 mm thick and excavation in any soil, returning , refilling and removal of surplus soil up to the distance of 50 mtr earth pit made out of PCC 1:2:4 type - B-1 alongwith 40 mm thick cover of RCC ( 1:2:4) reinforced with XPM ( Weight not less than 4 Kg/sqm) , watering arrangement, funnel and wire mesh, 20mm galvanized iron pipe “light grade” used for watering etc. complete and testing con comptetion all as specified and directed by Engineer-in-Charge.
Supply & fixing LED light luminaire 600mmx600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with driver three core flexible coppder conductor cases of suitable size complete all as specified and directed by Engineer in charge
S & F in replacement of sub-main wiring with two single core cables PVC insulated and un-sheathed 10 sqmm (Nominal Area) FRLS stranded copper conductor drawn in surface PVC casing and caping size 20mm /PVC conduict dia 20mm including 10.00 Sq mm (Nominal Area) copper cable as earth continuity conductor making good the disturbed surfaces and white wash or colour wash as per adjoining specifications , necessary junction box with covers including connections, PVC flexible pipes to be used while connecting the cable in DBs/Pannel, including taking down old unsv submain wiring complete all as specified and directed by Engineer - in - Charge. (Note : PVC cable and PVC conduit /PVC casing and caping shall be ISI marked)
S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KV capacity 25 ltr , BEE 5 star rated complete with all accessories suh as safety valve thermostate NRV connection piece etc. complete all as specified and directed
S&F Ceiling fan 1200 mm sweep, 240V complete with all accessories complete all as specified and directed
Deduct Schedule of credit (calculation will be done off line) Rs. 59514.00
RAJPATI CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .