ADDITION ALTERATION TO VICTUALING RATION STORES AND NAVAL STORE AT OTM PARADIP UNDER GE I CG BHUBANESWAR

Amount

Cutting chasing, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings , step, cills , sunshades,shelves lintels, etc and making good cutting exc 10cm but not exc 20 cm girth complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including quoins ,arches,pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brickwork with fly ash modular bricks, straight or curved on plan exe 6m mean radius, built in cement morter 1:6 complete all as specified and directed.

Rendering 10 mm thick cement plaster in on fair faces of brick work or concrete surfaces, in cement mortar 1:4 complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F Coloured Non Skid ceramic tiles (Premium quality Grade-I) 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incuding cement mortar bedding with 15mm screed bed in cement mortar 1:4 complete all as specified and directed.

Rendering 15mm thick cement plaster in on fair faces of brick work/ concrete surfaces, in cement mortar 1:4 finshed even and smooth without using extra cement complete all as specified and directed.

M&L TMT mild steel bars 6to 8 mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to 500/500D as in main reinforcement complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, beam haunching, girders bressumers, lintels, cantilevers, shelves including supports, over hangs etc also splays between floors and beams etc, flat & rough finished surfaces of concrete complete all as specified and directed.

M &L RCC M-20 type B1 using 20 mm graded stone aggregate (nominal mix) as in slab supported on walls, beams and coloumns in floors roofs landings balconies canopies decks slab and in shelves and the like etc. complete all as specified and directed.

Preparation of old surfaces of wall by complete removal of existing treatment and M&L for applying two coats of oil bound distemper over a coat of chalk whitening complete all as specified and directed.

Preparation of old surfaces of ceiling by complete removal of existing treatment and M&L for applying three coats of white wash complete all as specified and directed.

S&F 18 mm thick plywood BWR Type BB (Commercial Type), fixed with screws to timber frame work complete all as specified and directed.

S&F exhaust fan 300mm sweep AC, single phase, 230volts with louver shutter (with mosquito net) & 1.5 sqmm flexible wire of copper conductor from ceilling rose to ventilation fan complete all as specified and directed.

Cutting holes area exc 400 Sqcm but n.exc 0.10 Sqm built in cement mortar or cement lime mortar & stone walls built in lime mortar and making good dismantly portion in cement mortar (1:3) or Plain cement concrete (1:2:4) Type B1 complete all as specified and directed.

S&F Switch piano 5 Amps, single pole, one way complete all as specified and directed.

S&F ceiling rose 3 terminal surface bakelite 65x30 mm PVC/Polycarbonate, isolated body complete all as specified and directed.

M&L Point wiring complete with1.5 Sqmm PVC insulated FRLSH and unsheathed multistandard copper conductor 1100 V grade in and with & including medium grade PVC rigid conduits with accessories on wall including MS box of suitable size fabricated out of 2 mm thcik MS sheet and 3 mm thick laminated sheet cover for fixing of switches/ sockets etc including 1.5 sqmm copper conductor, FRLSH, unsheathed earth wire for continuity and connecting to earth dolly complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including cement screed with 15mm thick cement mortar of 1:6 complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20 to 25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including backing plaster of 10 mm thick cement mortar of 1:4 complete all as specified and directed.

Taking down chowkats or frame exceeding 1.50 Sq.m and n exc 4 sqm each with shutters (without taking off shutters from the frame) and refixing in other opening complete all as specified and directed.

Preparation of newly plasterd of walls and M&L for applying three coat of white wash complete all as specified and directed.

S&F 6mm thick teakwood lipping with nails to external surfaces of boards of 18 mm thick complete all as specified and directed.

M&L 2nd class hard wood of plain fillets, square , rectangular or triangular in section, sectional areas exc 13 Sqcm & n. exc 25 sqcm clean sawn secured/ fixed with screws complete all as specified and directed.

M&L two coat of synthetic enamel paint over a coat of pink primer over newely wooden surfaces of any description exc 10 cm width or girth when unconnected with other painting or when painted in different tint complete all as specified and directed.

Demolition of reinforced cement concrete of any description and any position complete all as specified and directed.

M/S T.N.CONSTRUCTION

Ajay Associates