Providing three nos. mechanical truck tyre washing facility at Gate No.1(A) and Gate No.IV inside Harbour area including operation and Maintenance (for a period of three years)

Amount

Filling of low laying area with saline sand or dredge spoil to the required level including transportation within a lead of 10 Km. by private trucks with polythene covering at the top to prevent spillage/blowing of same including loading at one end and unloading at other end, spreading in layers, leveling, watering, compacting by VRR in suitable layers with supply of all labour, materials, T&P, all taxes, royalties, Port entry fees, engagement, hire & running charges of all equipments, operation expenses, all POL, cost of water, testing charges, excluding GST etc. all complete as per direction of Engineer-in-charge. N.B:- 10% voids shall be deducted from the measured quantity of sand after compaction to arrive at the payable quantity.

Earthwork excavation in all kind of soil from the existing ground level for foundation trenches including leveling, ramming as per requirement etc. with all leads and lift, disposing the excavated material within initial lead at locations as directed, with supply of all labour, materials, T&P, hire & running charges of all machineries, port entry fees, all taxes etc. all complete excluding GST and as per direction of Engineer-in-charge.

Upto 1.50 mtr Depth

Beyond 1.50 mtr Depth

Earthwork excavation in ordinary soil from the existing ground for laying of DI pipe of 150mm dia. with all leads and lift with supply of all labour, materials, T&P, hire & running charges of all machineries, port entry fees, all taxes etc. all complete excluding GST and as per direction of Engineer-in-charge.

Back filling the pipe line trenches by using the excavated material after laying of the pipe lines as per requirement within initial lead and lift, including leveling, dressing with cost of all labour, T&P, transportation, hire and running charges of all equipments/ machineries, POL, all taxes etc all complete excluding GST as per direction of Engineer-in-Charge.

Supplying, mixing, transporting, laying in proper level & grade Plain Cement Concrete 1:4:8 (1 Cement : 4 Coarse Sand : 8 hard granite metal of 40mm & below size Crusher Broken) for Plain Cement Concrete (PCC) including form works made of ply/ steel shutters, hoisting, laying over compacted surface, compacting by any approved means, finished smooth to the exposed surface to proper level & gradient, barricading the work site, curing etc. with supply of all materials, labour, T&P, all taxes, royalties, hire & running charges of all machineries, transportation charges, cost of water, Port entry fees, testing charges of materials, excluding GST etc. all complete as per direction of Engineer-in-charge.

Cement concrete of M-30 grade for RCC work by using Crusher broken hard granite chips of 12mm to 20 mm size of approved quality, mixing in a Batching plant, transporting the concrete by any approved means, hoisting, laying on road pavement slabs/ drain/ sump/ culvert, roof slab, beam, column and wherever required in panels of required size, providing thermocol at top 50 mm of the panel joints so as to create a gap of 12mm between panels, compacting by mechanical vibrator with 60mm needle vibrator/ plate vibrator, finished smooth to the exposed surface to proper grade and camber, texturing the top surface by brooming with wire brush, curing by ponding, barricading the area for proper safety of the fresh concrete without obstructing the traffic, etc with supply of all materials, labour, T&P, tollage, all transportation charges, engagement, hire & running charges of all machineries, taxes excluding GST and excluding cost of formwork, cost of joints, cost of steel & labour charges for bending & binding of steel etc all complete as per direction of Engineer in Charge. N.B. : 1)Two separate Mix Design shall be conducted with different Cement brand for RCC work & Barricading the site if required. 2)Material testing cost will be borne by the contractor.

Brick work with K.B. bricks having crushing strength 75 Kg/ cm2 to 99 Kg/ cm2 with 1:6 proportion cement mortar, including splays, cutting, curing, racking out joints, complete with supply of all materials, labour, T&P, Port entry fees, taxes, tollage, royalties, scaffolding, excluding GST etc. all complete as per direction of Engineer-in-charge. (for all floors)

12 mm Cement plaster with Cement Mortar 1:4 proportion over brick work and concrete surface including chipping the concrete surface, finishing smooth to the exposed surface, rounding the corners wherever found necessary, watering the wall surface before plastering, with supply of all materials, labour, Port entry fees, curing, taxes, tollage, royalties, T&P, scaffolding excluding GST etc. all complete as per direction of Engineer-in-charge.

12 MM thick Cement plaster with cement mortar (1:4) proportion, over concrete work, finished smooth to the exposed surface, rounding the corners wherever found necessary including punning with supply of all materials, labour, T&P, Port entry fees, staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding GST as per direction of Engineer-in-charge

Supplying, cutting, straightening, bending, binding, tying the grills hoisting and placing in position the reinforcement of Fe-500 steel confirming to I.S. specifications of SAIL/ TISCON/ RINL/ JINDAL or of any approved make with supply of binding wire 18 to 20 gauge as required for the work with supply of all labour, materials, T&P, Port entry fees, all taxes, testing charges etc. excluding GST all complete including cost of reinforcement steel and as per direction of Engineer-in-charge NB: (i) No wastage shall be paid. (ii) Steel coefficient shall be considered as per IS 1786 for payment purpose with bar bending schedule.

Supplying of structural steel MS tested rounds/ square bars and RTS BARS , MS square bars , channels , joists, and flats to IS specification of SAIL/ TISCON/ RINL/ JINDAL etc. as directed upto the satisfaction of Engineer-in-charge with supply of all materials, labour, T&P, port entry fees, taxes, tollage, scaffolding charges excluding GST etc. all complete as per direction of Engineer-in-charge .

Providing, Fabricating , welding or riveting or bolting steel built up sections, trusses and framed work including cutting , drilling holes, hosting, fixing in position and applying a priming coats of red oxide paint, scaffolding, safety measures to the workmanship, complete with supply of all materials, labour, T&P, taxes, excluding GST etc. all complete as per direction of Engineer-in-charge .

Providing three coats of interpenetrating polymeric network ( IPNET) anti corrosive polymer coating or equivalent on concrete or steel surface with supply of all materials, labour, T&P, all taxes, royalties excluding GST etc. all complete as per direction of Engineer-in-charge .

Supplying and fixing door frame made of pre-painted steel section cold rolled steel of 8 mm minimum thick over all size of section 60x50mm minimum galvanized including EPDM section gasket fixing to concrete, by special self expansion screw etc. all with cost and supply of materials, labour, T&P, taxes, tollage, royalties, staging, curing with all transportation charges etc. excluding GST etc. all complete and as per direction of Engineer in charge

Supplying and fixing door shutter made of cold rolled steel style and rails of size 30x26 mm minimum around and lock rail minimum 130x23 mm size pre painted steel hollow section made with 0.6 mm minimum thick C.R. steel galvanized and pannel with 10 mm minimum thick cement bonded particles board etc. all with cost and supply of materials, labour, T&P, taxes, tollage, royalties, staging, curing with all transportation charges excluding GST etc. all complete and as per direction of Engineer in charge

Providing rigid, smooth, leak proof good quality centering & shuttering with formworks made out of new ply / Steel shutters, providing openings on walls as per requirement, maintaining proper alignment etc. in both horizontal and vertical plane, chipping & coaltaring after each use of shuttering materials, dismantling the same after stripping off period including supply of all materials, labour, T&P, tollage, all transportation charges, royalties, all taxes, excluding GST, etc all complete as directed by the Engineer in charge.

For Foundation and plinth

Lintel & Chajja

Shoring and shuttering for foundation work for preventing the collapse in horizontal / vertical / angled way with supply of all materials, labour, T&P, transportation, staging, taxes, port entry fees etc. all complete excluding GST as directed by Engineer in charge.

Collecting, Conveying, Supplying and transportation of Quarry Dust of approved quality, conveying the same by private Trucks with all leads including loading at one end and unloading at the other, spreading quarry dust over the approved surface, compacting with VRR at minimum 8 to 10 Ton static load for both Dry & Wet rolling, all complete including testing charges as well as cost of all materials, labour, T&P, royalties, Taxes, hire & running charges of all equipments, Port entry fees, operator expenses, cost of water, fuel, lubricants, excluding GST etc. all complete as per direction of Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of IRC Grade-I (90 mm to 63 mm ) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tones in stages to proper grade and camber, applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust , watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transportation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as per direction of Engineer-in-Charge.

Providing, laying, spreading and compacting stone aggregates of IRC Grade-II crusher brocken (63 mm to 45 mm ) size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite and to fill up the interstices of coarse aggregate with Quarry dust , watering and compacting to the required density as per clause 404 of MORTH specification for Road & Bridge works with supply of all material labour transportation hire and running charge of equipments, taxes , tollage , royalties etc all complete but excluding GST as per direction of Engineer-in-Charge.

Construction of dry lean cement concrete (DLC) sub base over a prepared sub grade with coarse and fine aggregate confirming to IS:383, the size of coarse aggregate not exceeding 25mm., aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600.1, cement content not to be less than 150Kg./Cum., optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10MPA at 7 days, mixed in a batching plant, transported to site, laid and compacting with vibratory roller 8 to 10 ton capacity , finishing and curing as per clause 601 of MoSRT&H specification for road & bridge works (4th revision), barricading the work site etc. with supply of all materials, labour, T&P, all taxes, royalties, hire & running charges of all machineries, transportation charges, cost of water, Port entry fees, testing charges of materials, excluding GST etc. all complete as per direction of Engineer-in-charge.

Supplying and laying 125 Micron polythene separation membrane with overlapping of 300 mm at joints including cleaning the surface before placing the membrane etc., complete including cost of all materials, labour, T&P, tollage, taxes excluding GST etc, all complete as directed by the Engineer In Charge. (N.B. : No payment will be made for overlapping.)

Supplying & forming 12mm wide x 85mm deep longitudinal joints by fixing 12 mm dia 640mm long HYSD bars @ 450mm C/C painted 50mm at center with anti-corrosive paint including providing & fixing bitumen paper, painting one side of concrete surface (250mm thick) with bituminous black paint, cutting grooves of required size and sealing the grooves with bitumastic filler etc, complete with cost & supply of all materials, reinforcement, T&P, labour, Hire and running charges of all machineries, safety measures, taxes excluding GST etc., all complete as directed by Engineer-In-Charge.

Supplying & forming 12mm wide x 60mm deep contraction joints by fixing 32 mm dia 450mm long mild steel round bars @ 300mm C/C including painting two third of the bars with anticorrosive paint & covering the same with 125 micron polythene fitted & cutting grooves of required size and sealing the grooves with bitumastic filler etc, complete with cost & supply of all materials including dowel bars, T&P, labour, Hire and running charges, of all machineries, safety measures, taxes excluding GST etc. all complete as directed by Engineer-In-Charge.

Exterior painting two coats over a coat of primer to wall surface with acrylic based weather coat paint of approved quality & shade by brush to give an even surface to the satisfaction of the Engineer-in-charge having resistance to Fungus, Fading, including scraping, cleaning, brushing, removing the flakes, applying uniformly two coats including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding, etc. complete but excluding GST as directed by the Engineer-in-charge. (for all floor)

Distempering two coats over a coat of primer using washable oil bound distemper of any approved quality and shade including cleaning the wall surface and dadoes filling the holes, cuts and depressions with plaster of paris, sand papering to give an even surface up to the satisfaction of Engineer-in-charge with supply of all materials, labour, T&P, taxes, scaffolding charges excluding GST etc. all complete as per direction of Engineer-in-charge. (for all floor)

Painting two coats with approved quality & shade enamel paint on new wood work/ iron work/ plaster surface over one coat of red oxide primer including scraping, cleaning, filling the holes with cement mortar etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding cost of GST as per direction of Engineer-in-charge.

Supplying, fitting, fixing of Vitrified floor tiles ( premimum Quality 600 x600 mm size) in floors, treads or steps and landing on 20 mm thick bed of cement mortar 1:4 (1cement: 4 sand) including cutting to size, jointing the joints with white cement and pigments laid to proper slope and level including rubbing and cleaning complete including supply of all materials, labours, T&P, taxes, port entry fees, curing, transportation charges, etc. excluding GST, etc. all compete as per direction of Engineer-in-charge .

Supplying, fitting, fixing of 6.5mm to 8mm thick glazed ceramic wall tile of approved quality and size, shade, print over 12mm thick CM (1:1) cement slurry including cutting to size and jointing with white cement and matching pigment laid to proper level, slope, cleaning and polishing with all cost of materials, labour, T&P, taxes, port entry fees, curing, transportation charges etc. excluding GST, etc. all complete as per the direction of Engineer-in-charge.

40mm thick (avg.) graded concrete in CC 1:2:4 using 6mm to 8mm size chips (Bajree) with 2% water proofing compound of approved quality over roof surface including mixing, hoisting and laying the concrete in position in all floors, finished smooth to the exposed surface in proper slope & gradient, consolidating with any approved means, curing etc. all complete with supply of all materials, labour, T&P, taxes, port entry fees, tollage, royalties, excluding GST, etc. all complete as per direction of Engineer-in-charge.

Supplying, fitting and fixing of MS black pipes of following diameter as per IS 1239 specification of apporved quality including cost and supply of materials, labour, T&P, taxes, tollage, royalties, staging with all transportation charges, port entry fees excluding GST etc. all complete and as per direction of Engineer in charge

150mm dia size ( Heavy grade ) for encashing

100mm dia size for suction/ delivery

65mm dia size for sprinkling

80mm dia for delivery line at pump portion

Providing and engaging Hydraulic excavator of 1cum. bucket capacity/ JCB on hour basis for excavation / leveling and removing debris / earth from catch pit/ settling pond or where found necessary through out the years for three truck tyre washing point including engagement, hire and running charges of machineries, cost of driver, P.O.L., all taxes, port entry fees excluding GST etc. all complete as per direction of Engineer-in-charge. (No idle hours will be paid)

Engagement of tractor with trailer for transportation of debris from catchpit of truck tyre washing point & disposing them with all lead & lift through out the years for three trcuk tyre washing point etc complete including hire and running charges of machineries, cost of driver, P.O.L., all taxes, port entry fees excluding GST etc. all complete as per direction of Engineer-in-charge. (No idle hours will be paid)

Back filling in foundation trenches by using the excess excavated material by the side of drain, culvert, sump & settling pond as per requirement within all lead and lift, leveling, dressing, watering, compacting by any approved means with cost of all labour, T&P, transportation, hire and running charges of all equipments/ machineries, POL, all taxes, port entry fees etc all complete excluding GST as per direction of Engineer-in-Charge.

Supplying, fitting, fixing of bolts, nuts & washer of approved quality to iron works etc. Including cost of materials, labour, transportation, all taxes, port entry fees etc all complete excluding GST as per direction of Engineer in charge

Supplying, fitting and fixing of 1/2"x3/4" MS socket with brass nozzle of approved quality (ISI mark of heavy quality) with adjustable system for jetting/ sprinkling of water over truck tyre etc. including cost of all labour, T&P, transportation, hire and running charges of all equipments/ machineries, welding, fabricating, POL, all taxes, port entry fees etc all complete excluding GST as per direction of Engineer-in-Charge. a) On either sides of the truck tyre wash area considering 3 rows each sides with 6 sprinkling nozzles . (for 3 sites)

Supplying of following dia DI Butter Fly valves body DI Epoxy seat EPDM operation hand lever rating PN- 10, IS3095/2000 of standard make of heavy quality and as required etc. including cost of all labour, T&P, transportation, hire and running charges of all equipments/ machineries, welding, fabricating, POL, all taxes, port entry fees etc all complete excluding GST as per direction of Engineer-in-Charge.

80mm dia for fixing at pump portions

100mm dia for fixing at pump portions

Supplying, fitting, fixing of 12 mm thick MS Plate for fixing in suction delivery pipes 80/100 mm dia of size including cost of all labour, T&P, transportation, hire and running charges of all equipments/ machineries, welding, fabricating, POL, all taxes, port entry fees etc all complete excluding GST as per direction of Engineer-in-Charge.

Supplying and installation of Kirloskar or equivalent make 20 HP/15 KW , 415 Volts 3000 rpm pump set of approved quality with water discharge at 15000-20000 liters per hour at 98 mtr head with star & delta panel board and necessary suction hose pipes, collars, clamps, foot valves, bends etc with supply of all labours & materials, transportation, all taxes, tollage, port entry fees including manufacturing test certificate, warranty card, etc. all complete excluding GST and as per direction of Engineer-in-charge.

Dewatering at work site/ inside the drain by providing 5 H.P pump sets attached with suction and delivery pipes with cost of fuel, operator, watch and ward, transportation charges, including all cost of running and hire charges of pump sets, all taxes, port entry fees etc. all complete excluding GST as per direction of Engineer-in-charge.

Supplying, fitting, fixing of following heavy quality G.I pipe, GI fittings with required union, elbows, jam nut, bend (ISI mark of approved quality), etc including cost of all materials, labour, transportation, all taxes, port entry fees etc. all complete excluding GST and as per direction of Engineer-in-Charge.

50mm dia G.I Pipe

15mm dia G.I Pipe

65mm dia G.I Pipe

50mm dia G.I socket

15mm dia G.I socket

65mm dia G.I socket

50mm dia G.I elbow

15mm dia G.I elbow

65mm dia G.I elbow

50mm dia G.I union

15mm dia G.I union

65mm dia G.I union

50mm dia G.I Tee

15mm dia G.I Tee

65mm dia G.I Tee

50mm dia G.I Short Piece

15mm dia G.I Short Piece

65mm dia G.I Short Piece

20mm dia Fullway valve

50mm dia Fullway valve

50mmx 20mm GI reducer

20mmx 15mm GI reducer

65mmx50 reducer

20mm Bullcock

65mm short piece 100mm long

65mm x100mm reducer

100 mm dia G.I bend

G I Flange 100mm

100mm x 25mm G I Tee

100mm GI short piece 100mm length

25mm short piece 150mm long

25mmx100mm G I Reducer

Cleaning of chocked ferrule points if necessary as per site condition including earth work excavation and refilling with supply of G.I fittings including cost of all labour , T&P, port entry fees, checking the pipe line to ensure no leakage on resuming to required pressure with mending good to damages etc all complete excluding cost of GST and as per direction of Engineer- in charge.

Labour charges for cutting pipes to length & inserting specials in the existing C.I line including earth work excavation , dewatering, shoring shuttering, testing the pipe line, jointing the specials with supply of all labour , T& P, port entry fees etc. all complete excluding GST and as per direction of Engineer-in-charge .

Dismantling C.I. pipes/D.I pipes or equivalent including excavation and refilling trenches after taking out the pipes, manually / by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in Charge including cost of all labour, plumber, T&P, port entry fees etc. all complete excluding GST and as per direction of Engineer-in-Charge.

Supplying of following D.I. pipe & fittings of heavy quality (ISI mark of approved quality) with supply and cost of all materials, labour, T&P, transportation charges, hire & running charges of all equipments, including testing of joints, port entry fees, excluding GST, etc. all complete as per direction of Engineer-in-Charge.

450mmX450mmX150mm dia D.I. double flange Tee

450mmX450mm dia D.I. Socket tail piece (One side flange, one side push joint)

150mmX150mm dia D.I. Socket tail piece (One side flange, one side socket joint)

150mm dia D.I. socket and spigot pipe confirming to IS 8329/2000 class K9 Flange pipe

150mmX90 degree DI socket bend

Kirlosker/ Vag/ Audco or equivalent make cast iron Non Rising Spindle type Sluice Valve confirming to IS 14846

10mm thick MS plate 150mm dia

Providing push-on-joints conforming to IS:3114-1994 to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes using Rubber Gaskets Conforming to I.S 5382 of S.B.R quality including testing of joints as per specification complete including cost of all labour, materials, plumber, T&P, port entry fees etc. all complete excluding GST and as per direction of Engineer-in-Charge. a) 150mm dia push on joint to DI pipe

Labour charges for Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K9, conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately) including cost of all labour, materials, plumber, T&P, port entry fees etc. all complete excluding GST and as per direction of Engineer-in-Charge. a) 150mm dia DI Spigot socket pipe

labour charges for fixing of C.I/D.I sluice valves/ N.R.V/ check valves/ Air valve/ water meter etc including cost of all labour, plumber, T&P, port entry fees etc. all complete excluding GST and as per direction of Engineer-in-Charge. a) One Near 18" Pipe & Other at sump near Gate No.I(A)

Providing, fabricating and fixing a water meter indicator of approved quality on the sump for detecting level of water quantum with H section (50x50x6)mm M.S. channel of 4 Mtr. Height with a brass pulley, making paint with reading mark, including floating water ball with supply of all labour, materials, T&P, taxes, port entry fees etc. all complete excluding GST and as per direction of Engineer-in-Charge.

Supplying, fitting, fixing of 1 HP electric Pump set ( Kirloskar of equivalent make) for water supply with complete fittings including Panel board necessary suction hose pipes, collars, clamps, foot valves, bends etc with supply of all labours & materials, transportation, all taxes, tollage, port entry fees etc. all complete excluding GST and as per direction of Engineer-in-Charge.

Labour charges for Fitting & fixing of pump set with pump foundation, panel board running the pump smoothly etc. all complete with supply of all labours, T&P, port entry fees etc all complete excluding GST as per direction of Engineer-in-Charge.

Supply fitting and fixing of C.I manhole chamber cover of sump of required dia as per ISI specification including supply of all materials, labour, T&P, taxes, port entry fees, scaffolding, etc. all complete excluding GST and as per direction of Engineer-in-Charge.

Supplying, fitting, fixing of 1000ltr capacity PVC sintex tank of approved quality and make pure white colour -3 core water tank over the roof surface including jointing with tared gasket & cement mortar (1:1) encasing the pipe with C.C (1:3, curing the concrete work, testing of joints/ leakage etc. all complete with supply of all materials, labour, T&P, taxes, transportaion, port entry fees etc. excluding GST all complete as per direction of Engineer-in-charge.

Dismantling of existing RCC structures by using mechanical jack hammer or any suitable method, cutting of reinforcement steel and disposing the same at designated place as directed, barricading the work site with supply of all labour, engagement, hire & running charges of all equipments, T&P, all taxes, Port entry fees, providing safety arrangements for workmen, cleaning the site, all transportation, excluding GST, etc. all complete as per direction of Engineer-in-charge.

Engagement of 27 nos. of skilled workers for operation and maintenance of 03 nos. mechanical truck tyre washing system round the clock in 3 shifts (8 Hrs. in each shift) by deploying 3 Nos. of skilled person to attend the operation of the pump house, cleaning works of ramp as well as drain, removing the sludge & discharging through the drain, updating the drain & the ramp regularly in each shift in each pump house, maintaining the records etc. for smooth functioning of the system for a period of 3 years after commissioning with supply of all Labour, T&P, port entry fees, all safety measures etc all complete, excluding GST as per direction of Engineer-in-Charge. NB: (i) The rate of wages against the above item is as per approved labour rate of Govt. of India/ PPT. The contractor must pay the minimum wages as approved by Govt. of india/ PPT during operation of contract. (ii) Any hike in the labour rate from time to time as per labour rate of Govt. of India/ PPT will be borne by the contractor. (iii) The quoted rate against item No.54 above should also include cost of EPF, ESI, any hike in the labour rate, Annual Bonus under Bonus Act, port entry fees. All the documentary evidence in respect of above payment should be submitted to the Division office along with monthly bill. (iv) Records for engagement of labour shall be maintained by the Agency in proper format and produced for payment purpose. It must be signed by official of PRD/ PMC on daily basis.

Skilled labours (For 1st year)

Skilled labours (For 2nd year)

Skilled labours (For 3rd year)

CMRGS INFRASTRUCTURE PROJECTS LIMITED

Encee Rail Engineers and Fabricators Pvt Ltd

Bidyadhar Swain