SPL REP TO ROOF TREATMENT PLASTERING JOINERY SANITARY FITTINGS IN BLDG NO P 01 AT JCO S CLUB J AND B SUB AREA SIG COY IN AGE BR I UNDER GE DANAPUR CANTT

Amount

Taking down chowkats or frames exc 1.5 sqm and n exc 4 sqm each with shutters (without taking off shutter from the frame) and removing to or from store complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to or from store complete all as specified and directed.

S & F Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side and back fill to chowkats with PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate complete all as specified and directed.

~Ditto~ all as per item No 3.00 above but size of frame is 125x60mm complete all as specified and directed.

S & F steel windows with side hung shutter incl box type butt hinges with bow handle,steel peg stay, tower bolts ( each shutter having two tower bolts 100mm long ) complete (with glazing bars) dovetailed or welded complete all as specified and as directed.

~Ditto~ all as per item No 5.00 above but without glazing bars complete as specified and as directed.

S & F Steel ventilator with top hung shutter including, hinges, peg stay, complete all as spesified and directed

S & F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. complete all as specified and directed.

Supply & fixing, in repair, MS curton rod with plastic coated decorative type with 02 Nos bracket, clamp etc complete set ( length exceeding 0.750m but Not exceeding 1.50m as required basis) for Door/window complete all as specified and directed

Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S & F factory made solid Panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, all as per specification and drawing complete all as specified and directed.

S & F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as directed.

S & F in repair 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

M & L PCC 1:2:4 type B1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works complete all as specified and directed.

S & F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified and directed.

S & F, Aluminium Butt hinges (ISI marked), medium weight of size 100 mm complete all as specified and directed.

S & F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm complete all as specified and directed.

S & F 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F Aluminium handles, cast type, anodized 150 mm size complete ISI Marked complete all as specified and directed.

S & F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long complete all as specified and directed.

S & F of 150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S & F mild steel, 300 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S & F MS PVC sheathed 20mm dia drapery rod including Bracket ,end ball, rounded block (coated with brown/cherry/Golden colour) of approved pattern and shade complete approved by GE complete all as specified and directed.

S & F 4 mm thick sheet glass, ordinary quality, and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed.

~Ditto~ all as per item Ser No 25.00 above but glass is frosted or grounded on one side complete all as specified and directed.

S & F Pressed steel frames for cup board chowkats of size 60x40mm of 1.25mm thick with one or more rebates including necessary fixing lug, hold fasts, butt hinges etc,complete including taking down old cub board frame complete all as specified and as directed

S & F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves complete all as specified and directed.

S & F Hasp and staple, mild steel, safety type, stove enameled black, including bolt to hinge plate and fixed with screws of 125mm size complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar including removal to a distance exc 250 m but n.exc 500 m complete all as specified and as directed.

M & L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

~Ditto~ all as per item Ser No 31.00 above but except bricks complete all as specified and as directed.

Excavation in trenches in soil n.exc 1.5 m wide and n.exc 1.50m in depth for foundation, pier holes etc n exc 10 sqm on plan and getting out complete all as specified and as directed.

M&L cement concrete 1:4:8 type D-2 using 40mm graded aggregate in foundation, filling and mass concrete complete all as specified and as directed.

M&L reinforced cement concrete 1:2:4 Type B-1, using 20 mm graded aggregate in foundation, footing, foundation beams,plinth beams, bases for columns,pedestal, under reamed piles, mass concrete, etc complete. all as specified and directed

M&L reinforced cement concrete 1:2:4 Type B-1, using 20mm grared aggregate as in columns, pillars, posts, struts etc complete.

Form work to sides of rough finished surfaces of concrete foundations, footings, sides and sofits (if any) of foundations & plinths beams and similar wk flat etc complete.

Form work to rough finished square, rectangular or polygonal concrete surfaces as in sides of columns, pillars, posts, struts,etc complete.

M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete all as specified and directed

~Ditto~ all as per item Ser No 39.00 above but 5mm dia and over in stirrups, spacers and binders complete all as specified and directed

Lifting of existing RCC roof load of building for replacement of brick pillar through hydraulic lifting/mechanical method complete including all other framework, scafolding etc for removing/demolition existing Brick pillar etc complete all as specified and as directed. Note : Each arrengment of lifting shall be measured as each/one Job

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

M & L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 10mm thick in cement mortar 1:4 on fair face of bricks/concrete surfaces in ceiling finishing even and smooth without using extra cement complete all as specified and directed.

Supply only water proofing compound (liquid), ISI marked.

M & L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over and including one coat of primer complete all as specified and directed.

M & L Preparation of old plastered surfaces of wall and applying two coat of cement base paint incl removal of existing treatment complete all as specified and directed.

M & L for two coats of OBD on newly plaster wall surfaces incl applying with 3 mm thick Birla / JK Putty over a coat of primer of surfaces complete all as specified and directed.

M & L Preparing new plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and directed.

M & L Preparation of new plastered surfaces of wall and applying three coat white wash complete all as specified and directed.

M & L preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M & L preparation of old decorated surfaces of wall by complete removing of existing treatment and applying two coats Oil bound distemper incl applying with 3 mm thick Birla / JK Putty over a coat of primer of surfaces filing or cracks, holes on wall by putty etc complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and change of existing colour including removal of sclaed paint and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed

Taking up or steel tubing & connections including cleaning for refixing dia of pipe 15mm etc complete all as specified and directed.

Taking up or steel tubing & connections including cleaning for refixing dia of pipe 20mm etc complete all as specified and directed.

S & F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc complete all as specified and directed.

S & F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 20mm bore etc complete all as specified and directed.

Fixing only old galvanised steel tubes & connections with new fittings on wall & ceiling 15 mm bore complete all as specified and directed. Note :- Old pipe shall be reused retrived from item No 56.00

Fixing only old galvanised steel tubes & connections with new fittings on wall & ceiling 20 mm bore complete all as specified and directed. Note :- Old pipe shall be reused retrived from item No 57.00

S & F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed.

S & F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed.

S & F in repair 500 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position incl dismantling existing tanks complete all as specified in SSR Pt-I complete all as specified and directed.

S & F in repair PVC ball valve 20mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms) complete all as specified and directed. Make- Prayag/Polytuff.

S & F in repair bib tap 15mm chromium plated long body with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by the Engineer-in-Charge.

S & F in repairs angle cock 15mm chromium plate screw down screwed for iron pipe of brass ferrule etc complete all as specified and directed.

S & F in repairs pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed.

S & F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed.

S & F in repair shower rose chromium plated with swivel joints of size 125mm cast copper alloy CP, fancy type with CP neck 9" long made to shape complete all as specified and directed.

S & F in repairs 600mmx450mmx6mm bevelled edge mirror mounted in 40mm wide PVC frame of approved size and colour on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S & F in repair stainless steel soap dish of standard size complete all as specified and directed.

S & F in repairs Vitreous China wash basin white flat back size 450x300 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, complete all as specified and directed.

S & F in repair PVC connection 450mm long with two PTMT nuts (Prayag) complete all as specified and directed.

S & F in repair CP towel rail, 20mm dia, D type,60cm long complete all as specified and directed.

S & F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides complete all as specified and directed.

S & F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC). complete all as specified and directed.

Dismantling/hacking out PCC floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M & L for Non skid ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed (1:4) etc complete all as specified and directed.

M & L for 450x300 x7 mm thick glazed ceramic tiles (Digital pattern) including highlighter colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specified and directed.

M&L PCC 1:2:4 type B1 (20mm graded stone aggregate) , 25 mm thick as in sub top layer of floor and finished rough to receive the floor tiles.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including incl Screed bed or bedding layer of Cement Mortar (1:6), 15 mm thick for laying floor finishes, necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M&L Machine cut Kota stone slab flooring 20-25mm thick as in skirting, over cement mortar laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete incl 10mm thick plaster in CM 1:6 complete all as specified and directed.

Taking down CI/PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc of 110 mm dia. complete all as specified and directed.

~Ditto~ all as per item Ser No 85.00 above but 75 mm bore complete all as specified and directed.

S & F PVC (SWR) bends/ shoes any radius of 110 mm dia complete all as specified and directed.

S & F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed.

S & F PVC (SWR) vent cowl of 75 mm dia complete all as specified and directed.

S & F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe, all as specified and directed.

Demolition of cement concrete of any description and in any position and removing the rubbish from the work site complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 20mm graded aggregate as in plinth protection/ flooring etc finishing even & smooth without using extra cement complete all as spd and directed.

Demolition of existing treatment of roof/ parapet , Mud puska on roof /parapet including plastering, brick tiles, stone slabs and leeping any thickness including removal of debris from site complete all as specified and as directed.

M & L for 25mm thickness (average) for plain cement concrete 1:2:4 type B-0 (using 25 mm graded stone aggregate), as in padding / levelling course for maintain to proper slope of roof including necessary form work as required complete all as specified and directed.

M&L for 15 mm thick screed bed in CM 1:4 with water proofing compound @ 200ml /50kg of cement as per manufacturer's instruction finished surface even and smooth with out using extra cement including taking down of complete existing cement plaster etc complete all as specified. (Note : WPC will be measured & paid for separately).

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.

Taking down carefully copper / aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's with MCB and making good the disturbed surfaces of walls complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls complete all as specified and directed.

M & L for Point wiring with in repair PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall (cutting except on ceiling for fan point only, on ceiling PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding MS boxes for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed. Make of cable: Polycab/Havell's/Finolex/Mescab and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

~Ditto~ All as per srl item No 100.00 above but one bell point controlled by one bell Push complete all as specified and directed.

~Ditto~ All as per srl item No 100.00 above one 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified and directed.

~Ditto~ All as per srl item No 100.00 above one 5 Amps socket out let point on independent board controlled by one switch complete all as specified and directed.

~Ditto~ All as per srl item No 100.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent boardcomplete all as specified and directed. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

Supply and fixing switch piano flush button single pole one way 5 amps, 230 Volts complete all as specified and as directed.

Supply and fixing switch piano flush button single pole one way 15 amps, 230 Volts complete all as specified and as directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, 230 Volts complete all as specified and as directed.

Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite 63.5mm dia three terminal, fixied complete all as specified and as directed.

Supply and fixing electronic fan regulator 450 watt 240 volts AC step type complete all as specified and as directed.

Supply and fixing bell push single pole, 6 amps, 240 Volts, flush type complete all as specified and as directed.

Supply and fixing Lamp holder, insulated body with back plate suitable for batten/angular fittings fixed complete all as specified and as directed.

Supply and fix LED Lamp 7/8 watt complete all as specified and directed.

Supply and fixing Bell multi music type AC, 230 Volts,single pole fixed complete all as specified and as directed.

Supply and fixing in repair LED tube light batten box type with decorative end caps suitable single tube 1x 18/20 watt T8 lamps type complete with both end bi-pin holder and all accessories internally pre wired and fixed to wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Havells, Cat No: REGALBATTENT8UPTO1X22WDSBSWH or equivalent model of Bajaj/Philips/Crompton.

S&F in LED tube light fitting single tube 1x 9 watt 230 volt wall mounted luminaire industrial type made of sheet metal box type suitable for T- 8 tube complete with electric electronic driver and bipin holder including one no tube18/20 watt fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Bajaj/ Wipro/ Havells / Philips/CG.

M&L sub main wiring with 2 run of4.00 sqmm (nominal cross-sectional area) PVC insulated (FRLS) unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor including one run of 4.00 sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed cable with stranded copper conductor as continuous earth wire connected in common earth dolly drawn in PVC rigid non- metallic conduit complete all as specified and as directed. (NOTE : (i) PVC non rigid nonmetallic conduit shall be measured & paid separately under relevant item of this Schedule ‘A’. (ii) Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length). Make of cable:-Polycab/Havell's/ Finolex

M & L for 25 mm dia PVC conduit having a wall thickness not less than 1.5 mm with all accessories (including cutting chases & making good the disturbed surface to its original specification) with all accessories for submain wiring cable complete all as specified and directed. Make of Conduit :- Plaza/Harsh/Kalinga Premium/AKG.

Supply and fixing Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, triple pole and neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete all as specified and as directed. Make : Legrand/Schneider/Siemens/L&T

Supply and fixing Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, single pole and neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete all as specified and as directed. Make : Legrand/Schneider/Siemens/L&T

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection complete all as specified and directed. Make : Schneider/ Legrand/ L&T / ABB.

Supply and fixing MCB SPN 5 to 32 amps 10 KA, C-series including connection complete all as specified and directed. Make : Schneider/ Legrand/ L&T / ABB.

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 40mm bore upto 5m lenght for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 5 of MES schedule 2009 part-I and connected complete all as specified including testing on completion.

Supply and fixing LED security light fitting 25 watts capacity 240 volts 50 Hz IP-65 including all accessories such as driver, SPD etc complete with GI pipe light grade 25mm dia bracket of size minimum length 0.80 mtrs with suitable clamp for fixing to wall complete all as specified and as directed. Make: Havells cat part no:-ENDURAPEARLSL30WLED757SASYTOPCMPCG or equivalent of Bajaj/ Crompton / Philips .

Supply and fixing MCB TPN 63 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge. Make : Legrand/Schneider/Siemens/L&T.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

HARINANDAN RAI SONS

M/S Priya Trading Agency

SINHA CONSTRUCTION

jaglalchoudharyandsons

Vijay Bakshi and Son

MS CHAKRAVARTY PRITHIVI RAJ

MS JODHI PRASAD SINGH SONS