ADDITION / ALTERATION AND SPECIAL REPAIRSTO OLD MARRIED ACCOMODATION AT NASIK ROAD UNDER GE NASIK ROAD CAMP

Amount

Taking up or down tubes galvanized iron and connections & removing/ shifting to site/store incl cleaning for relaying/refixing height up to four storey complete all as specified and directed by Engineer-in-charge of size :- Note :- Rates quoted are inclusive of taking out bib taps,PVC float valves and fitting as per site condition.

25mm or 32mm dia

20 mm dia

15 mm dia

Re-fixing only tubes galvanized iron as directed incl renewal of threading/tread cutting at ends of GI pipes fixed to walls or laid in floor and jointing including S&F new fitting such as socket, bends, elbows, union etc all as specified and directed of size :- Note :-1. Serviceable GI pipes taken down in item No 01 shall be reused. 2. The rates quoted are inclusive of all new fittings required and cutting threading to existing pipe.

25mm or 32mm dia

20 mm dia

15 mm dia

S&F for tubes medium grade galvanized with all fitting fixed to walls, ceiling and laid in floor of including cutting, holes in concrete/brick wall/roof and making good if required height up to four storey bldgs all as specifed and directed by Engineer-in-charge of sizes :-

25 mm dia

20 mm dia

15 mm dia

S&F in repairs 25mm Gun metal globe or gate valve cast copper alloy with iron wheel head, screwed both ends for iron pipe and fixed in repairs all as specified and directed by Engineer-in-charge.

S&F in repairs 15 mm bore Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Chromium plated shower roses with or without swivel joints, 15mm size, 195mm longwith bend of 45 degree with flange of PTMT any colour (Minium weight 40gms) including fixing to steel pipe or union complete all as specified and directed by Engr-In-Charge.

S&F ready made PVC conection 15 mm bore 450 mm long with end brass nuts, screws and PVC washer complete all as specified and directed.

S & F 15 mm dia Stop valves fancy type,cast copper alloy chromium plated screwed down,high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.

S & F in repairs wash hand basins,Vitreous china (flat back , size 550X400mm,with brackets, inclunding cutting for and pinning in ends of brackets or erecting stand , including supply & fixing 32 mm wastecoupling of PTMT (half or full threaded, Min weight 45 gms) and Outlet pipe.

S & F in repairs Corner wash hand basins,Vitreous china size as approved by GE with brackets, inclunding cutting for and pinning in ends of brackets or erecting stand , including supply & fixing 32 mm wastecoupling of PTMT (half or full threaded, Min weight 45 gms) and Outlet pipe.

S & F 15 mm dia Pillar taps,cast copper alloy fancy type with capstan heads,chromium plated,screwed down high pressure,with or without lettered Hot or Cold with long screwed shanks and fly nuts,screwed for iron pipe.

S&F in repairs vitreous china squatting patern "Orisa pattern" size 580mm x 440mm with "P" or "S" trap white with intergral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete complete all as specifed and directed by Engineer -in-charge.

S&F in repairs coloured PVC valve less, syphonic action fushing cistern , low level, 10 ltr capacity with inlet, ball valve,, float, chain and pull and brackets complete all as specified and directed

S&F in repairs flush pipe of polyethylene of low or high density of PVC 32mm dia suitable for for low level flushing cistern complete all as specified and directed by Engr-In-Charge.

S&F in repairs stainless steel sink made out of 1.0 mm thick sheet for kitchen including waste pipe CI cantilever brackets and waste coupling etc complete and making good to the side of wall,connecting union to pipe, including bedding in cement mortar to dwarf wall. Overall size 495mm x 420mm and bowl size 410 x 330 x 160mm

M & L in repairs for PVC (SWR) floor trap, plain with grating including demolition of old trap and jointing with solvent cement of outlet 75/100 mm dia proper joint of out let connection complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey .

Taking down existing PVC/AC rain water , waste and vent pipe of any bore complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four store

S&F PVC (SWR) pipes 110 mm dia. double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey

S&F PVC (SWR) bends 110 mm dia any radius

S&F PVC (SWR) 110 mm dia vent cowl

S&F PVC (SWR) junction single (single T) equal or unequal 110 mm bore.

S&F PVC (SWR) bends with access door 110 mm dia any radius

S&F PVC (SWR) pipes 75 mm dia. double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge. Note : Height of building upto four storey

S&F PVC (SWR) bends 75 mm dia any radius

S&F PVC (SWR) 75 mm dia vent cowl

S&F PVC (SWR) junction single (single T) equal or unequal 75 mm bore.

S&F PVC (SWR) bends with access door 75 mm dia any radius

Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises.

M&L Screed bed or bedding layer 15 mm thick of cement mortar 1:6.for laying floors finishes

M&L rendering 10 mm thick in cement mortar1:4 as in backing coat on fair surfaces of brick wall.

M&L Non Skid ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Non Skid ceramic tiles coloured 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L glazed cermic tiles coloured size 300x200x6 to 7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth after curing period two coat of Ditachment DS shall be applied @2.50 Kg/Sm. The paste like consistancy like is made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 7 days curing, testing shall be done by flooding for 72 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement. 32mm dia and 500mm long GI Spout light grade shall be provided in all sunken slabs to drain off water. including demolition of cement concrete in sunken slab and filling of mass concrete 1:5:10 all as specified and directed by Engr-In-Charge.

Dismantling stone slabs and tiles of any thickness in floors, aprons etc. laid bedded and pointed in any mortar

S&F Machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed by Engr-In-Charge.

M&L Green Marble (of any type) work (table rubbed and polished) in cooking platforms in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Marble 18 to 20mm thick. all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. (Stone slabs so provided shall be not less than 900mm in length)

M&L machine cut kota stone slab flooring 20-25mm thick, laid over and including 20mm thick cement mortar screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L Kota stone slab 15-20mm thick in treads and riser of steps, skirting, dado and pillar laid over and including 15mm thick cement mortar screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L Rough dressed lime stone slab 25 mm thk flooring, laid dry, jointed and pointed in cement mortar 1:3 including 15 mm thick screed bed in cement mortar 1:6 for laying floor finished.

Demolition of cement concrete in ground floors and pavings not exc.15 cms thickness (below or above GL.)

M&L for cement concrete type D-2, 1:4:8 (40 mm graded agg) in foundation, filling and mass cocrete and sub base etc.

Dismantling water tanks and removing to store of capacity 1000 litres

Dismantling water tanks and removing to store of capacity 500 litres

Dismantling water tanks and removing to store of capacity 2000 litres

S&F Rotational moulded polyethylene water storage tanks tripple layered ISI marked (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 litres including 20/25mm dia PTMT float valve complete set all as sepecified and directed.

S&F Rotational moulded polyethylene water storage tanks tripple layered ISI marked (cylindrical vertical with closed top) hoisted and fixed in position of capacity 2000 litres including 20/25mm dia PTMT float valve complete set all as sepecified and directed

S&F Rotational moulded polyethylene water storage tanks tripple layered ISI marked (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres including 20/25mm dia PTMT float valve complete set all as sepecified and directed

Taking down Chowkhats with shutters without taking off shutters from the frames exc 1.5 Sqm each not exc 4 Sqm each

Taking down Chowkhats with shutters without taking off shutters from the frames (not exc 1.5 Sqm each).

Taking down shutters of any descriptin exc 1 Sqm and n. exc 2 Sqm each.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar depth of embedded portion of hold fasts or lugs measured from the faces of jamb into the wall exc half brick but n.exc one brick for inserting hold fasts and making good dismantled portion incement mortar 1:3 or cement concret 1:2:4 type B-1 as required.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS suquare tube, suppling and fixing in opening as per specification and drawings .

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as directed by Engineer in-charge.

S&F factory made plain framed panelled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered panticle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure teated complete all as specified and directed.

S&F 2nd class hardwood plain, solid,straight, chowkhats & frames, wrought,framed, rebated on the solid,rounded or champered,put togetherwith glue pinned at joints , supplied and fixed.

S&F 2nd class hardwood glazed and skelton shutters, 35mm thick open rebated and prepare to receive glass, gauze etc without sashbars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified in SSR Part-I section 8, clause 8.24 (a) supplied and fitted to chowkats. all as specified and directed by Engr-in-Charge.

Dismantling of steel window/ventilators any description and any size complete all as specified and directed.

S&F solid PVC frame of size 50 x 95 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS suare tube , with necessary arrangement for fixing of glass for louer type window / ventilator and additional PVC beading around the frame for fixing of wire mesh supplying and fixing in opening all as specified & directed (note :- Glazing / wiremesh shall be measure & paid separately).

M & L for steel window in Ahmadbad section with double shutters, side hung including box type hinges with steel handles steel peg stay and complete with glazing bars (one side glazed shutter and other side fly proof shutter with and 15x3 mm flat iron fillet around and centre for fly proof shutter including preparation of newly surface , applying two coat of synthetic enamel paint over coat of prime confirming to IS steel window and section complete all as specified and directed by Engineer -in-Charge. Note :- glazing and wire gauging shall be measured and paid separately.

S&F MS steel flat iron hold fasts confirming to FE-290 Gde E165.

M&L preparing the surfaces of wood and wood based material,steel and iron work, new or old and treated with tar or coal tar black paint treating ends of pasts, backs of chowkhats etc area tarred exc 0.1 Sqm each.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised

S&F 100mm size butt hinges stainless steel

S&F 150mm aluminium anodisd, barrel tower bolts of excturded section.

S&F aluminium alloy,anodised, sliding door bolt with hash, staple(bolt type) and fixing clip of sheet,cast over exturded sectionand fixing bolt and sliding bolt of exturded section or cast alumimium alloy and fixing 300 mm length

S & F in repairs Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

M&L painting to wood and wood base surface of any description not otherwise described, over 10 cm width or girth preparation of new surfaces, priming coat pink primer and applying two coat of synthetic enamelled paint

Resecuring without taking down of chowkhats or shutter steel or wooden window area not exceeding1.5 Sqm each including necessary repairs to hinges, welding and nut/bolts etc all as specified and directed. Note: Building height up to four storey bldgs

Dismantling boarding, cup board self/ shutter any description, fixed in any position with nails/screw etc complete all as specified and directed.

M&L for 25mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work including 4mm thick teak wood beading on all edges as in kitchen cabinet, cup board self, book self pelmet box etc complete all as specified and directed.

S&F 75mm size butt hinges stainless steel

S&F100mm aluminium anodisd, barrel tower bolts of excturded section.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised

S&F in repair 20/25 mm dia medium weight, aluminium powder coated of approved colour as in drapery rod complete all as specified and directed.

S & F aluminium powder coated brackets, of colour and design as approved suitable for curtain rods of 20/25mm dia complete all as specified and directed.

Hacking out old broken glass,n.exc 0.5 sqm area each (any thickness, size, quality or description) from metal/ wooden frame inculding punching or drilling out old glazing pins / spring clips etc. Height upto four storey buildings.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty/ wooden beading where is required in squares n.exc. 0.5 Sqm in each pane. Height upto four storey buildings.

Same as item above but figured glass,pin headed type

Demolition of brick work/stone work built in any cement mortar including coping.

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius,built in cement mortar 1:6.

M&L rendering 15mm thick cement mortar on brick masonry surfaces in cement mortar 1:4 and finishing even and smooth without using extra Cement.

Taking down cement or cement lime plaster,any description on brick or stone walls,etc including racking out joints,hacking for key,scrubbing down with water,etc.

M&L rendering 15mm thick on fair faces of brick masonry surfaces in cement mortar 1:6 and finishing even and smooth without using extra cement including sagol finish on plaster surface of internal wall.

M&L rendering 5mm thick cement mortar on Ceiling surfaces in cement mortar 1:6 and finishing even and smooth without using extra Cement.

M & L for preparing new plastered surfaces and applying and finishing wall with Acrylic smooth exterior paint of required shade: New work (two coat or more coat applied @ 1.67ltr/10sqm over and including priming coat of exterior primer applied @ 2020 Kg/10sqm etc complete all as specified.

M & L for Complete removal of existing exterior surfaces of walls, and applying Acrylic smooth exterior paint of required shade : New work (two coat or more coat applied @ 1.67Ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10sqm etc complete all as specified .

M&L preparing surfaces and applying two coats of white wash on new surfaces of ceiling

M&L applying two coats of Distempering on walls with oil emulsion distemper including preparation of new plastered surfaces.

M&L applying two coats of Distempering on walls with oil emulsion distemper over preparation of old plastered surfaces over 3mm thick wall care putty on wall including complete removal of existing treatment,scrapping etc.

M&L applying two coats of white wash on old surfaces of ceiling

M&L preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint .

M&L preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint .

M&L for repairing of broken edges of RCC chajjas, roof projection, fins facia and simillar works by dismantling of loose and damaged/disintgranted portion of edge (cross sectinal area not exceeding 150 Sqcm) with cement mortar 1:4 or cement concrete 1:11/2:3 type A0 and chicken wire mesh with nails ( to hold fresh mortar / concrete) including neccesary from work upto four storied buildings and finishing the surface by white wash or cement base paint or Acrylic smooth exterior paint to match the surface with existing work.

M & L Providing precast cement concrete Type B0 1:2:4 (12.50 mm graded aggregate) louvers and jallies, 25mm thick (measured solid) including all mouldings but excluding frame set in cement mortar 1:4 all as per specification and directed by Eng-in-Chage.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bldg. security light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

Taking down carefully by unscrewing from board/outlet boxes, fixture and fittings such as switches, sockets, ceiling roses, lamp holders, bracket, ceiling fitting, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse)

Taking down carefully sub main wiring of any size and type, and making good disturbed surfaces of walls, floors etc.

Taking down existing main switches / DB,s of any make and type including any type of boards etc. complete all as specified and directed.

M&L for point wiring complete with and including single core PVC FRLS insulated unsheathed flexible bright annealed multistranded copper conductor cables 1.5 sqmm ( 22/0.30mm) 650/1100 volts grade drawn through and including PVC casing caping on walls/ceiling incl all accessories /fittings etc and sunken boxes of heavy grade , ISI marked for mounting of switches, sockets fan regulators etc including 1.5 sqmm (22/0.30 mm) 650/11.10 V grade PVC insulated , unsheathed flexible multistranded copper conductor cable as contineous earthwire connected to metallic bodies of luminaires/fans etc at one end and to common earth dolly at other end all as specified and directed. (Note : Switch and socket to be measured and paid for separately)

(a) One light point controlled by one 5/6 amps one way switch

(b) One ceiling fan point controlled by one switch and one fan regulator.

(c) One exhaust fan point controlled by one 5/6 amps one way switch.

(d) One bell/buzzer points controlled by one 5/6 Amps bell push.

(e) One 3 pin socket outlet, 5 Amps on the same board with other switches.

(f) One 3 pin socket outlet, 5 Amps independent.

(g) One light point controlled by two 2-way switches.

All as per item No 101 above but with 2.5 sqmm for power point

Supply and fixing switch piano; flush type, single pole, one way, and 5/6 Amp IS: 3854 marked with valid CML No. complete all as specified.

Supply and fixing switch piano; flush type, single pole, two ways, 5/6 Amp IS: 3854 marked with valid CML No. completes all as specified.

Supply and fixing electronic bell / musical buzzer complete all as specified.

Supply and fixing of bell push

Supply and fixing socket outlet multipurpose having provision for 3 pin, 5 Amp and 2 pin, 5 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified.

Supply and fixing socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified.

Supply and fixing switch piano; flush type, single pole, one way, and 15/16 Amps IS: 3854 marked with valid CML No. complete all as specified.

Supply and fixing switch piano; flush type, with fuse and neon incator for storage geyser single pole, one way, and 15/16 Amps IS: 3854 marked with valid CML No. complete all as specified.

Supply and fixing ceiling rose, Three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified

Supply and fixing LED light fitting 1 x 20W, 220 volts, AC decorative box type with driver, holder including LED tube light connecting upto with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply & fix lamp holder, PVC / Polycarbonate type with back plate suitable for batten / angle fittings

Supply & fix LED bulb 7/10 W

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Taking down fan of any size, sealing cable end, dismentalling blades and removing fan and blades to stoe

Taking down regulator, sealing cable end, dismentalling blades and removing regulators to stoe

M&L painting tpceiling fans complete, in situ with synthetic enamel paint by spaying including filling cavities with filler, one coat after cleaning all dust etc.

Hanging only ceiling fan of any size removed against item no 22, connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor of size 0.5 Sq mm from ceiling rose/ connector to fan.

Supply & fix stepped type electronic fan regulator flush type 240 vols, ISI marked with valid CML No.and connecting up complete on the existing phenolic laminated sheet etc. as required.

Supply and fix ceiling fan 1200mm sweep complete with blades, down rod , accessories 230 volt, Min air delivery 210 CFM with service value 6.00 BEE,5 star rated with brushless direct current motor. all as specified and directed.

Supply & fix exhaust fans made of sturdy Engineerig plastic AC single phase 230 / 240 V , 50 Hz, 1200 RPM,copper winding of sweep 300 mm with louvers shutter.

Supply & fix exhaust fans made of sturdy Engineerig plastic AC single phase 230 / 240 V , 50 Hz, 1200 RPM,copper winding of sweep 250 mm with louvers shutter.

Supply and fix Water heater storage type, steel body with copper vinner tank and heating element upto 2KW , capacity 25 litres. BEE 5 star rated with all accessories such as safety valve, thermostate,NRV, connection pipe etc compltete all as specified.

Supply and fix sheet metal enclosure for DBs double door 240 volts single pole & neutral 8 way with 200 Amps rated bus bar .

Supply and fix sheet metal enclosure for DBs double door 440 volts TPN 4 way with 200 Amps rated bus bar .

Supply and fixing SPN 32 Amps rating 240 volts, 10 KA 'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connection , testing and commissioning.

Supply and fixing SP 6- 32 Amps rating 240 volts, 10 KA 'C' curve miniature circuit breaker (MCB) in the MCB DB complete with connection , testing and commissioning.

Supply and fixing 415 Volts 10 KA 'C' curve miniature circuit breaker (MCB) TPN 40-100 Amps capacity in the DB complete with connection, testing and commissioning.

Material and labour for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of nominal cross section area as under and drawing into and including PVC non metallic rigid conduit, accessories,of medium grade not less than 25mm dia ,including PVC insulated stranded copper conductor nominal cross section area as under of continuous earth wire complete for Two runs of 4 Sq mm as current carrying conductor and one run of 4Sq mm as earth conductor

Material and labour for earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 meter below ground level with top edge of the earth plate at a depth of not less than 1.50 meter below ground level connected to galvanized iron or steel earth wire, 4.0 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No. 3 of SSR-2020 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc.Note : (i) The unit rate includes earthing wire and protection pipe up to 7.5 metre.

Material and labour for Earth continuity conductor or main earthing lead fixing on wall or batten or recess in ground or drawn in recess conduit with 4 mm dia GI earth wire all as specified and directed.

S&F steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 20 mm dia along with necessary calmp nut bolt etc complete all as specified and directed Make - ITC / JINDAL /ZENITH/TATA/ PRAKASH SURYA /SWASTIK

Supply and fixing LED Light fitting 1 x 9W/ 1 x 10W bulk head luminiaries including LED light driver , holder connecting up with 3 core flexible copper conductor cable of suitable size.

Taking down existing energy meter by disconnecting electric connection of any type, any make, any capacity in poly carbonate or sheet steel body, ISI marked, 50 Hz ,240 Volts AC , single phase rating etc. all as specified. ( Old removed electric meter shall be deposited in store yard of AGE E/M )

Supply and fix AC single phase static energy meter of accuracy class 1.0, 240 V, 50 Hz with Backlit LCD display of rating 5 - 30 A, (measures and displays KWH, V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box.(73 for accn)

Dismantling carefully the existing U/S LT cable/ service wire of any size from its position by necessary disconnecting of and removing complete all as directed by Engr-in-Charge.

S& F XLPE insulated armoured and pvc sheated heavy duty electric cable size of following sizes aluminium conductor 1100 volt grade as per IS 7098 (Part-1) 1988 with latest amendment laid in tranches passing through pipes /ducts including testing complete

4 core 25 sqmm

4 core 16 sqmm

M&L For Double Walled Corrugated DWC HDPE Pipe of outer dia 50mm and inner dia 38mm including 90 degree bends with coupler and rubber ring laid in trenches of size 50mm suitable for cable protection of size 10 sqmm to 50 sqmm complete all as specified and directed.

Excavation in trenches for laying of cables ,poles and stay in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.50 mtr deep and getting out.

Returning & filling in, including spreading and leveling, watering and well ramming in layers n.exc. 25cm all as specified and directed by Engr-in-Charge.

Removing excavated soil n.exc 50 mtr and depositing where directed at a level n. exe 1.5mtr above the starting point all as specified and directed.

M/S ANAND G NUNSE

sapana enterprises

Nexus Infratech

L.K.R.TIWARI CONSTRUCTION