ESTIMATE OF PROPOSED CONSTRUCTION ZELADARI (KHAJNI) SECOND SUBDIVISION TUBE WELL DIVISION-2 GORAKHPUR, DISTT GORAKHPUR

Amount

Construction of building

Dismantling brick work in cement mortar and including stacking of materials within a distance

Dismentailing reinforced cement concrete or RB work including stacking of dismantled materials within a distance

Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches.

Filling of carted earth.

Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors.

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work.

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S.6313 (PartII 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chlordane will be used. The rate of application of chemical emulsion shall be as follows : (1) Treatment for masonary & foundation 5 liters per sqm. (2) Back fill in immediate contact with foundation 7.5 liters/sqm (3) Treatment of top surface of plinth filling 5 liters/sqm (4)Treatment junction of wall and the floor 7.5 liters /sqm (5) Treatment of soil along external perimeter of building 7.5 liters/sqm (6) Treatment of soil under apron along external perimter 5 liters/sqm. (As per manufacturer's standard dilution)

R.C.C. work with cement approved coarse sand and 2 cm. guage approved stone grit in the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. including cost of binding wire. The rate excludes making of drip course which shall be paid extra. Ground Floor

As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete) Ground Floor

As in item 6 but for the lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete)Ground Floor

As in item 7 above but in R.C.C. Raft foundation and footing with approved stone ballast. (Using 1:1.5:3 Mix concrete)

As in item 7 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20.

M-150 brick work in 1:6 (one cement and six coarse sand sand of 1.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.

Same as in item no. 11 above but in super-structure above plinth level up to floor two level ( up to two storeys ) including necessary cutting and moulding of brick work as required and also including honeycombed brick work in thickness of wall more than 12cms. Ground Floor

P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.

12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 Fine sand

12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 6 Fine sand.

12mm thick plaster in 1:4 on ceiling and soffits of stairs upto floor two level.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Supply and fixing 25 mm thick Kota stone tile in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Supply & Fixing 6mm (1/4") China white Glazed tiles in floor in skirting or dado laid with 1:3 (1 Cement: 3 Coarse sand) finished with white cement slurry, jointing and polishing complete including supply of all meterials labour and T & P etc. required of proper completion of work.

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick

Mild steel or iron work of small sizes and sections such and holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Fabrication of hold fast for door chaukhats and windows.

Fabrication of grill / stairs case railing.

Fabrication of Z-section steel windows.

Providing wood work in frames of doors, indows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class teak wood

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.8 TO 5.7 mm thick glass panes

Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material &sand papered smooth including cost of all materials.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material &sand papered smooth including cost of all materials.

Providing & fixing M.S. sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

Providing and fixing bright finished M. S towerbolts (barrel type) with necessary screws etc. complete (a) 250 mm x 10mm

Providing and fixing bright finished M. S towerbolts (barrel type) with necessary screws etc. complete (a) 200 mm x 10mm

Providing and fixing bright finished M.S. handles with screws etc. complete (a) 125 mm

Providing and laying "brick coba" 12mm thick laid with M.150 class brick bal coba 7.50cm. Thick with gap of 15mm to each other.over 20mm. Thick base of cement morter 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound in 1:4 cement & coarse sand & morter finished smooth & top mashed false square 30cmX30cm.& side wall parapet shall be mono tythic plaster wall up to 30cm.higher & junction & corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T & P etc. com.for proper completion of work

Painting Ist coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.

Same as item above but on new wood surface.

Providing and fixing glass strips in joints of terrazo/ cement concrete floors 35 mm wide and 5.5 mm thick

ELECTRIFICATION WORK

Wiring points for light with 1.5 sqmm. FR PVC insulated multistrand single core copper conductor cables in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5sqmm. FR. PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. earth continuity wire and piano type switch etc. complete in all respects.

Wiring point for fan/fresh air (Light duty exhaust fan) with 140(B) but in PVC Conduit with 1.5sq. Mm. FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit

Wiring Point for 5 amp. Plug with 141(B) but in PVC Conduit with 1.5 sq. mm FR PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit

Supply and Wiring of submain with 1 number 1.5 Sq. mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 20mm dia as earth continuity wire drawn inside the conduit complete in all respect

Supply & fixing of Switch Box

As in item 221 (B) but in 20 mm dia (2mm thick)) PVC Condult with one no. 2.5Sq. Mm for PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit

Supply and wiring of Submain in PVC insulated 1100 V grade single core copper conductor cable in heavy gauge rigid PVC conduit partly laid in slab along withh reinforcement before concreting with 8 SWG GI earth continuity wire etc. complete in all respects

Supply and wiring of 2 No. 6Sq. Mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in heavy duty (2mm thick) PVC conduit as earth continuity wire drawn in conduit

Supply and fixing of single unit LED aviation, obstration light complete with transfarmer and LED spiral etc. complete in all respect

Supply and fixing of of single light wall bracket on matching M.D.F.E.G. board base etc. complete in all respect

Marking Hole in the wall for exhaust fan and finishing properly complete in all respect

Supply and Fixing of electronic fan regulator 120-280V ISI marked, on the existing switch board including making connection, required material labour T&P etc. for proper completion of work to the satisfaction of Engineer in Charge

Supply & Fixing surface/flush mounting 6 ways VTPN distribution board with additional metal without MCB complete in all respect as directed at site by Engineer in Charge

Supply and fixing of 240 Volts 'L' series miniature circuit breaker in existing MCB, DB Complete with connections as required

Supply & Fixing of MCCB (16KA) thernal magnetic relese 125Amp 4 Pole CAT A

Supply & Fixing of MCCB (16KA) thernal magnetic relese 160 Amp 4 Pole CAT B

Supply & fixing of power plug with 15A/250 Volt flush type switch and 5 Pin 15A/250V flush type universal socket in suitable M.S. Box of 1.75mm x 100mm x 50mm size with phenollic taminated balelite sheet cover 3mm thick Fixed with brass machine screw and cup washer

Supply & Fixing sheet steel enclosure surfac/flush mounting fitted with 20Amp. 2 Pin and earth metal clad scraping earth plug and socket complete in all respect. As directed at site by Engineer in Charge

Supply & Fixing 100 A 415V metal clad TPNCFS complete with HRC Fuse etc. on angle iron frame comlete in all respect

Supply & Burrying of 600mm x 600mm x 6mm G.I.Plate, Vertically for earthing with its top atleast 3m. Belowground level comlete with 20mm G.I Pipe and Funnel for watering and two earthing leads of No. 8 to 10 SWG G.I. wire in 15mm dia G.I Pipe upto switch board ( from apron upto switch board thye cost of G.I. Pipe and G.I Wire will be extra) 30Cm. SquareC.I. Frame with hinged cover, machinery housing, alternate layers/of charcol/ chkened salt atleast 150mm thick alround etc. complete in all respect.

Suppy & laying 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect.

Supply & fixing of 1 No. 8 SWG copper wire 15mm dia G.I pipe for earthing, laid in ground or in wall duly concealed including the cost cement the sand, T&P other material required for proper completion of the work as directed at site.

Supply & fixing of 200amp. Four pole changeover switch on 50mm x 50mm x6mm angle iron frame, including the cost of labour, T&P, Painting and other material required for proper completion of the work as per direction and satisfaction af Engineer in Charge

Supply & laying of aluminium conductor, PVC insulated Armoured, Served, sheeted cable 1100 Volt grade at a depth of 750mm below gorund level over a cushion of 75mm thick sand alround and protected with burnt bricks on side and top on surface, the cable run shall be fixed on M.S. Clamp etc. of Suitable size as per direction of Engineer in Charge. Complete in all respect the armouring the cable shall be properly connected with earth conductor by clamp etc. 16Sq. mm. 4 core.

Supply and laying of Aluminium conductor PVC insulated armoured served sheathed cables 1100 Volt grade at the depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top and surface the cable the run shall be thick on M.S. Clamp.etc. of suitable size are as directed by The Engineer in Charge complete in all respect. The arouring of the cable shall be prperly connected with the earth conductor by clamp etc.

Supply & fixing fo recess/surface/pendent mpunting round 6 Watt 8 Watt LED down lighter having powder coated die cost aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respect. CAT-AA

Supply and fixinf of recess/surface/pendent mounting gorund 12 to 15 Watt LED down lighter having powder coated die cost aluminium housing with heat sink, diffuser/reflector and driver set complete in all respect CAT-AAA

WATER SUPPLY AND SENITATION

P/F concealed galvanized mild steel tube (Medium Grade) IS : 1239(Part-I) 1979 Complete with fittings & Clamps, including cutting and making goods the walls etc. complete (Internal Works)

15mm Dia.

20mm Dia.

25mm Dia.

32mm Dia.

40mm Dia.

50mm Dia.

P/F concealed galvanized mild steel tube (Medium Grade) IS : 1239(Part-I) 1979 Complete with fittings & Clamps, including cutting and making goods the walls etc. complete (External Works)

15mm Dia.

20mm Dia.

25mm Dia.

32mm Dia.

40mm Dia.

50mm Dia.

65mm Dia.

80mm Dia.

100mm Dia.

P/F’ copper alloy bid cock IS: 781-1977 comlete all with materials

15mm dia.

20min dia.

25mm dia.

P/F chrome plated bid complete with all materials (15mm dia.)

P/F C.P. brass angle valve for cistern, wash basin geyser etc. 15 mm nominal hple size including cost of all materials, iabour T&P etc,

P/F 15 mm nominal hole size C.P. stop cocks., ’

P/F 15 mm nominal hole size C.P. brass pillar cocks.

Fixing 15 mm PVC connection, heavy quality with brass Union including supply of all materials, labour T&P etc. required for proper completion of the work.

30 cm length

20mm dia.

P/F in position C.P. brass towel rail complete with brackets including making chases in wall and repairing the same in 1:3 CM complete

Fixing C.P. Brass soap dish with C.P. brass brackets fixed to wooden plugs, plastic” sleeves with C.P. Brass screws.

P/F C.P. Jali for Nahani trap 100 mm dia including cost of material.

P/F C.P. Brass Waste pipe for sink and wash basin in 32 mm dia complete, cost of all materials, labour T&P etc.

P/F C.P. Brass Waste pipe for sink and wash basin including all cost of materials, TEP ete, ‘ Je EEO,

P/F Chrome plated copper pipe connection for sink, wash basin, cjstern, Geyser, efc.} with two nos. C.P. Nuts

300 mtr. Long

450 mtr. Long

P/F Indian type white glazed earthen wire J" quality ISI marked W.C. pan size 580 mm Indian make of approved quality including cost of all materials.

same as above but Orrisa Pan

P/F European type white glazed earthen wire W.C, pan (Indian make) of approved quality ISI marked Bakelight seat cover and lid with C.P, brass hinges and rubber buffers.

P/F 100 mm size 'P' or ''S" trap for water closed squatting pan including jointing the trap with the pan and pipe in cement mortar 1:1 (1 Cement: 1Fine sand)

P/F 10 lit. low level Flushing cistern (white vitreous china clay) of standard approved make complete with ail accessories and fitting.

P/F wash basin with single hole/number of holes for pillar tap with C.L. or MS. brackets painted white including cutting hole and making good the same but excluding fittings. 630 x 450 cm.

P/F pedestal for wash basin complete recessed at the back for the reception of the ipes and fittings,

P/F sand cast iro spigot & socket, Soil Waste, drainage and ventilation pipes of the followings nominal size (lead, chaulked Joints to be measuerd and paid sepately),

providing lead chaulked joints to cast iron soil waste and ventilation pipes and fitting of the following nominal size/diameter including testing of joints

P/F M.S. strays and clamps for sand cost main pipes of the following diameters.

P/F S.W. master trap 1 00 mm dia of approverd make with cap including bed of lime concrete of 100:16:32 complete.

P/F white vitreous china flat back urinal size 580x380x350 mm with 5 lit, P.V.C. flushing cistern, flush pipe, C.I. pipe trap and grating complete in all respect.

supplying of mild steel tank made out of 10 G.H.R. sheet fitted with inlet and outlet, washout overflow and manhole duly grinned “with anti corrosive paints (excluding cost of staging).

P/F mirror of following size of approved make with teakwood moulded frame and 6mm thick hard board backing including cost (1200x450mm)

P/F in position 100 mm dia C.I. nahani trap with hinged perforated cover complete with gasket and chaulked joints, including, making necessary chases and hole in floor and walls and repairing the same to the original condition completed.

P/F in position C.I. man hole cover and Frames, IS: 7267 embedded in R.C.C. cover finished 1:3 cm etc. complete. (Fixing Manhole coverpelt duty with frame 38 kgs.)

M/s Nikhil Enterprises