ADDN ALTERATION OF ADMIN SECTION AND OFFICE SPACE AT EWOSC NAVAL STATION KARANJA

Taking down carefully copper /aluminum point wiring (light, fan, socket or power) with wiring acessories such as bend boards Elbows only, ceiling fittings etc and removing material to store for safe coustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. as per existing complete all as specfified and directed.

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specfified and directed.

M&L for use for ready mix plaster for rendering 15mm thick on fair faces of brick/concrete surfaces finished even and smooth without using extra cement (WPC to be measured and paid separately) complete all as specfified and directed.

M&L for use ready mix plaster for rendering 10 mm thick on fair faces of brick work or concrete surfaces of walls finished even and smooth (with out using extra cement) complete all as specfified and directed.

M&L for use ready mix plaster for rendering 5 mm thick on ceilings and finishing the surface even and smooth without using extra cement complete all as specfified and directed.

M&L for three coats of white wash on newly plastered surfaces of ceilings including preparation of surface complete all as specfified and directed.

Preparation of new or previously untreated plastered surfaces of walls and M&L for applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern over & including one coat of primer complete all as specified and as directed

M&L applying 3mm thick wall care putty on new or old plastered surface and prepare the smooth surface with sand paper and M&L for applying two coats of oil bound distemper over a coat of primer on walls complete all as specfified and directed.

M&L for epoxy base joint filler paint on external surfaces of walls to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and as directed. Make : Pidilite / Focrac / Chemistic or equivalent as approved by GE.

Complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and M&L for applying two coats of oil emulsion distemper over & including a coat of primer over layer of smooth POP/Putty finish as required pruning 3mm thick strictly as per manufacture's instruction with smooth roller finish complete all as specified and directed. Note: Rate of cleaning of all floors, glasses & furniture, etc after painting is deemed to be included in the quoted unit rates.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the permises and removal to out of MoD land complete all as specfified and directed.

M&L non skid ceramic coloured tile 7 to 8mm thick (square /rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor over & including 15mm thick screed bed in cement motar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the tile complete all as specfified and directed.

M&L non skid ceramic coloured tile 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in skirting/dado over & including 10mm thick screed bed in cement motar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the tile complete all as specfified and directed.

S&F for aluminium door/window/ventilator/partition/work stations made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc, complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items, with and including making good to the disturbed portion with its original specifications, complete all as specfified and directed.

S&F 4 mm thick sheet glass, ordinary quality colour, white, frosted fixed in aluminium Door /window shutter/ partition etc complete all as specified and directed.

S&F 12mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specfified and directed.

S&F 18/19mm thick Block boards grade 2 quality, interior grade, commercial type and both face covered with approved pattern decorative coloured laminate type 1 of 0.9mm thick with sides all around with decorative lipping complete all as specified and directed.

S&F 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber or steel frame work complete all as specified and directed.

S&F 300 mm Steel Galvanised Telescopic Drawer ball bearing drawer slides including screw mechanism that utilizes ball bearings for smooth and effortless drawer movement complete all as specified and directed.

S&F 150mm long Chrome-Plated Handle complete all as specified and directed.

S&F Harrison H-0471 11 pin 25mm Steel Furniture Lock I Multipurpose Lock with 2 Reversible Keys I Heavy-Duty Lock complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specfified and directed.

S&F for PVC False ceiling consisting of 600 mm x 600 mm, 12 mm thick prelaminated self design PVC sheet of density 600 kg/Cum solid PVC panel including frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof salbs by means of ceiling cleats, flat 40x3 mm sie 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles all as per Manufacturer's specification complete all as specfified and directed.

S&F in repairs, decorative hollow PVC sheet 10mm thick (fluted panel) having density not less than 4 kg/sqm fixed to wall panelling with self drilling screws including necessary fram aluminum section 51x35x55mm and 600mm c/c 51x32x55mm grid work and corner mouldings as required as per manufacturing instruction and complete all as specified and directed

Supply and laying 32 mm dia MS pipe heavy grade with all fittings laid in floors or fixed to walls and ceilings etc complete all as specfified and directed.

JOB (A) B/R WORKS

of earth pit and the cost of the same is deemed to be included in quoted unit rate. (ii) GI Strip and protection pipe upto 7.5m is deemed to be included in the quoted unit rate. (iii) GI watering pipe upto 1.2m s deemed to be included in the quoted unit rate.

M&L for Point wiring with single core 1100 volts grade 1.5 sqmm size FRLSH PVC insulated unsheathed stranded copper conductor cable using color code drawn through conceiled conduit in brick/stone wall & including PVC conduit suitable size with all accessories including 1.5Sq mm FRLSH PVC insulated unsheathed copper conductor cable for continous earth conductor (using green colour) to common earth and connecting to earth dolly for One light / Buzzer point controlled by one switch 5 Amp, SP, one way 240 volts complete all as specfified and directed. Note :- (i)Necessary cutting and chasing of wall surafce including making good surface is deemed to be included in quoted rate.(ii) Modular white cover plate with frame & modular metal flush box shall be measured and paid separately.

S&F in replacement PVC Insulated unsheathed copper conductor 3 core 2.5 Sqmm round sheathed multicore industrial cable for voltage gradeupto 1100 omplete all as specified and directed.

All as per BoQ Serial Item No.29.00 above but for One fan/exhaust fan point controlled by one switch

All as per BoQ Serial Item No.29.00 above but for One 5 pin socket outlet 5 Amps on same board

All as per BoQ Serial Item No.29.00 above but for One 5 pin socket outlet 5 Amps on independent board

All as per BoQ Serial Item No.29.00 above but for with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with FRLSH PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

M&L for wiring for circuits/sub main wiring with FRLSH PVC insulate sheathed 2 x 4 sqmm stranded copper conductor cable 1100 volts grade medium duty drawn with & including concealed PVC conduit with 4 sqmm PVC insulated green copper cable FRLSH for continues earth with suitable dia of PVC pipe with all accessories complete all as specfified and directed.

M&L for wiring for circuits/sub main wiring with FRLSH PVC insulate sheathed 2 x 1.5 sqmm stranded copper conductor cable 1100 volts grade medium duty drawn with & including concealed PVC conduit with 1.5 sqmm PVC insulated green copper cable FRLSH for continues earth with suitable dia of PVC pipe with all accessories complete all as specfified and directed.

M&L for wiring for circuits/sub main wiring with FRLSH PVC insulate sheathed 2 x 2.5 sqmm stranded copper conductor cable 1100 volts grade medium duty drawn with & including concealed PVC conduit with 2.5 sqmm PVC insulated green copper cable FRLSH for continues earth with suitable dia of PVC pipe with all accessories complete all as specfified and directed.

S&F double door MCB VTPN DB 12 way made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection including taking out old unsv MCB DB any size/type complete all as specfified and directed.

Taking down ceiling fan and depositing in MES store yard for cleaning and painting and refixing in same or other locationwith connected accessories complete all as specfified and directed.

S&F wall mounted fan 400mm, 50Hz, 220V complete all as specfified and directed.

S&F ceiling fan 1200mm, 220V, 50 Hz, BLDC type without remote complete all as specfified and directed.

S&F in replacement MCB SP 240 V, 50 Hz, 10 KA conforming to IS 8828 of rating 5 to 32 Amp, 'C' series complete all as specfified and directed.

S&F in replacement MCB SPN 40 Amps 240 V 50 Hz 30 mA, confirming to IS 8828 complete all as specfified and directed.

S&F in replacement MCCB 4 pole, thermal magnetic release range 200 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specfified and directed.

S&F LED recess/surface mounted 2" x 2" luminarie 36/40w fitting, 220V, AC, 50 Hz, surge protection, high power factor complete all as specified and directed.

Supply, laying, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed armoured, cable heavy duty 1100 volts grade, 95 sqmm, 3.5 core aluminum conductor in trenches / ducts complete all as specfified and directed.

Excavation in trenches not exc1.5 mtr wide and not exc 1.5 mtr depth and getting out in any type of soil including taking out faulty cable/cable covers and GI pipe complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the Starting point complete all as specfified and directed.

M&L for dry river sand as sand cushioning for protection of UG cable including punning of sand in layers complete all as specfified and directed. NOTE: Punned thickness sahll be measured for payment purpose

Supply & laying un-reinforced precast concrete cable cover class LV type 1, flat size 250mm x 150mm x 40 mm complete all as specfified and directed.

M&L for GI pipe light grade with all fittings laid in trenches complete all as specfified and directed.

S&F modular dummy type switch cover 1 module complete all as specified and directed.

S&F modular white cover plate with frame 1/2 module complete all as specfified and directed.

S&F modular white cover plate with frame 3 module complete all as specfified and directed.

S&F modular white cover plate with frame 8 module complete all as specfified and directed.

S&F modular white cover plate with frame 12 module complete all as specfified and directed.

S&F modular METAL FLUSH BOX with frame 1/2 module complete all as specfified and directed.

S&F modular METAL FLUSH BOX 3 module complete all as specfified and directed.

S&F modular METAL FLUSH BOX 8 module complete all as specfified and directed.

S&F modular white cover plate with frame 12 module complete all as specfified and directed.

S&F switch modular, single pole, one way, 6 Amp complete all as specfified and directed.

S&F bell push flush type 6 Amp complete all as specfified and directed.

S&F modular socket outlet 15 Amp, 5-in-1, controlled by one switch complete all as specfified and directed.

S&F switch modular, single pole one way, 16 Amp complete all as specfified and directed.

S&F modular socket 2 in 1, 3 pin, 6 Amp flush type complete all as specfified and directed.

S&F modular fan 5 step regulator for ceiling fan complete all as specfified and directed.

S&F Ding dong door bell electric suitable for AC 230 volt, single pole complete all as specfified and directed.

S&F modular ceiling rose, 3 phase/PVC/polycarbonate, isolated body, three terminals complete all as specified and directed.

S&F surface and wall mounted LED batten of 20/22 watt with polycarbonate housing & integrated electronic driver having THD<20% complete all as specfified and directed.

M&L for earthing complete with GI earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) , type B1, using (20 mm graded stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering ,40 mm dia light grade GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-1(2009) connected to earthing test point all as specified and indicated including testing on completion NOTE: (i) The earth chamber shall be constructed 0.50m away from the edge

Notes : (i) The work consists of One Job: JOB (A):SO(K)/15/2025-26/LBW (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department.

S&F UPS of capacity of 15KVA, online type, 3 phase including connected fitting, fixtures and all specified and directed in charge

Supply and install HI wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating capacity 2 ton electric drivn (230 Volt 50 Hz single phase supply ) complete all as specified and directed.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA with over load protection and high voltage Cut-off ensuring protection complete all as specified and directed.

S&F Copper tubing of dia 1/2" or 5/8" for suction line suitable for 1.5/2 Ton AC including thermal insulation and other brass fitting, fixing into wall etc complete all as specified and directed.

S&F Copper tubing of dia 1/4" or 3/8" for discharge line for suitable for 1.5/2.0 Ton AC including thermal insulation and other brass fitting, fixing into wall etc complete all as specified and directed.

SPLIT AC WORKS

M&L for sub main wiring with 2 Single core PVC insulated unsheathed cable 1100 Volts grade heavy duty copper conductor multistranded of size 4 Sqmm (nominal area) drawing in and including 20 mm dia PVC Caping Casing Including one single core green colour PVC Insulated unsheathed cable copper conductor multistranded of size 4.0 Sq mm as earth wire upto common earth and connected to earth dolly complete all as specified & directed.

S&F in replacement sheet metal enclosure DP with a two pin and earth plug and socket complete with one single pole MCB 32 Amp 10 KA C series complete all as specified and directed.