Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 LAdmitted-Finance | ₹38.2 L | L1 | Admitted-Finance |
| 2 | L2₹38.5 LAdmitted-Finance A 8 YAHODUTTA SOCIETY KASBA PETH PUNE 411011 | PUNE | PUNE | MAHARASHTRA | 411011 | ₹38.5 L | L2 | Admitted-Finance |
| 3 | L3₹38.6 LAdmitted-Finance FLAT NO 105 2A SURVEY NO 30 2 MORAYA HEIGHTS DHANKAWADI PUNE 411043 | PUNE | PUNE | MAHARASHTRA | 411043 | ₹38.6 L | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | AV AND COMPANY L2 | SWAMIRAJ CORPORATION L3 | RAJMUDRA ENTERPRISES L1 |
|---|---|---|---|---|---|---|
| 1.00Sub Estimate | ||||||
| 2.00 | 1. Providing and supplying at site of ductile iron / spheroidal graphite (S.G.) iron D/F non- rising spindle resil-ient seated glandless sluice valves with handwheel &without bypass arrangement. Valves in accordance with BS 5163 of PN-10/ 16 rated, with body and bonnet of ductile iron confirming to IS 1865 Gr. 500/7 or Gr.400/15. Wedge fully encapsulated WRAS approved EPDM rubber (approved for drinking water), Wedge nut of brass,shaft of stainless steel 1.4021/1.4104, stem seals min. 3 nos. of NBR, internal fasteners of stainless steel A2. Body& Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be full bore & tight shut-off. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14846. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16)
1.1. 350 mm. | 3 | Number | 1,45,345 ₹4.4 L | 1,46,000 ₹4.4 L | 1,45,000 ₹4.3 L |
| 3.00 | 2. Providing and supplying at site of ductile iron /spheroidal graphite (S.G.) iron D/F double eccentric resilient seated short body butterfly valves with gear box & handwheel, without bypass arrangement. Valves in accordance with BS EN 593 of PN 10/16 rated, with body & disc of ductile iron confirming to EN 1563/IS 1865 Gr.500/7 or Gr.400/15, Body seat of intergral SG Iron/S.S. AISI 316, seal retaining ring of steel C45/S.S. 1.4436, Shaft of S.S. 1.4021, Periferial disc seal and “O” rings of WRAS approved EPDM rubber (suitable for drinking water), Internal fasteners of stainless steel A2. Body & disc coated inside & outside with electrostatically applied epoxy powder coated blue colour. (suitable for drinking water.) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be 100% tight shutoff. Face to face is per IS 13095 short body. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 13095. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete.
2.1. 250 mm. | 12 | Number | 68,558 ₹8.2 L | 68,600 ₹8.2 L | 68,000 ₹8.2 L |
| 4.00 | 2.2. 300 mm. | 4 | Number | 88,005 ₹3.5 L | 88,000 ₹3.5 L | 87,500 ₹3.5 L |
| 5.00 | 3. Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)
3.1.Lowering,laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves
3.1.1. 8) 250 mm. | 12 | Number | 5,420 ₹65,040 | 5,425 ₹65,100 | 5,400 ₹64,800 |
| 6.00 | 3.1.2. 9) 300 mm. | 4 | Number | 5,621 ₹22,484 | 5,600 ₹22,400 | 5,600 ₹22,400 |
| 7.00 | 3.1.3. 10) 350 mm. | 3 | Number | 6,927 ₹20,781 | 6,900 ₹20,700 | 6,900 ₹20,700 |
| 8.00 | 4. Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).
4.1. Dia of Pipe : 200.00 mm (I. D.) Thickness of pipe :
4.1.1. 4) iv) 8.00 mm. | 40 | Running Meter | 3,860 ₹1.5 L | 3,900 ₹1.6 L | 3,850 ₹1.5 L |
| 9.00 | 4.2. Dia of Pipe : 250.00 mm (I. D.) Thickness of pipe :
4.2.1. 4) 8.00 mm. | 12 | Running Meter | 4,788 ₹57,456 | 4,800 ₹57,600 | 4,750 ₹57,000 |
| 10.00 | 4.3. Dia of Pipe : 300.00 mm (I. D.) Thickness of pipe :
4.3.1. 6) 10.00mm. | 6 | Running Meter | 7,191 ₹43,146 | 7,200 ₹43,200 | 7,100 ₹42,600 |
Tender Value
₹38.5 L
EMD Value
₹38,600
Closing Date
21 May 2026, 5:00 pmClosed
SE E and M Comm Mumbai
Office of the Superintending Engineer, E and M (Comm.) Circle, Udyog Sarathi, Andheri (E) Mumbai-93.
RANSAI M and R to Water Supply Scheme at Ransai Modification and strengthening pipe gallery, inspection chamber of RSGF with allied works at WTP .
2026_MIDC_1300966_1
MIDC/E and M/AMB/38591/13/2026-27
Open Tender
Electrical and Maintenance Works
180 days
Ransai
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,030
₹38,600
26 May 2026
7 May 2026
25 May 2026
7 May 2026
21 May 2026
13 May 2026
7 May 2026 - 11 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Sub Estimate | - | - | - | - |
| 2 | 1. Providing and supplying at site of ductile iron / spheroidal graphite (S.G.) iron D/F non- rising spindle resil-ient seated glandless sluice valves with handwheel &without bypass arrangement. Valves in accordance with BS 5163 of PN-10/ 16 rated, with body and bonnet of ductile iron confirming to IS 1865 Gr. 500/7 or Gr.400/15. Wedge fully encapsulated WRAS approved EPDM rubber (approved for drinking water), Wedge nut of brass,shaft of stainless steel 1.4021/1.4104, stem seals min. 3 nos. of NBR, internal fasteners of stainless steel A2. Body& Bonnet coated inside & outside with electrostatically applied epoxy powder coated blue colour (suitable for drinking water) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be full bore & tight shut-off. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 14846. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete. (For PN 10 & 16)
1.1. 350 mm. | 3 | Number | - | - |
| 3 | 2. Providing and supplying at site of ductile iron /spheroidal graphite (S.G.) iron D/F double eccentric resilient seated short body butterfly valves with gear box & handwheel, without bypass arrangement. Valves in accordance with BS EN 593 of PN 10/16 rated, with body & disc of ductile iron confirming to EN 1563/IS 1865 Gr.500/7 or Gr.400/15, Body seat of intergral SG Iron/S.S. AISI 316, seal retaining ring of steel C45/S.S. 1.4436, Shaft of S.S. 1.4021, Periferial disc seal and “O” rings of WRAS approved EPDM rubber (suitable for drinking water), Internal fasteners of stainless steel A2. Body & disc coated inside & outside with electrostatically applied epoxy powder coated blue colour. (suitable for drinking water.) as per DIN 30677- 2 & GSK guidelines with a coating thickness of min. 250 microns. Valves should be 100% tight shutoff. Face to face is per IS 13095 short body. Flange drilling as per IS 1538 raised face & pressure testing at manufactures works shall be done as per IS 13095. including transportation charges excluding GST levied by GOI & GOM in all respect etc. complete.
2.1. 250 mm. | 12 | Number | - | - |
| 4 | 2.2. 300 mm. | 4 | Number | - | - |
| 5 | 3. Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.)
3.1.Lowering,laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves
3.1.1. 8) 250 mm. | - | Number | - | - |
| 6 | 3.1.2. 9) 300 mm. | 4 | Number | - | - |
| 7 | 3.1.3. 10) 350 mm. | 3 | Number | - | - |
| 8 | 4. Manufacturing, providing and supplying spirally welded / ERW/ SAW / fabricated M. S. pipes (Commercial Quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes, welding on automatic welding machine and forming ‘V’ edge on both ends of pipes including railway freight, insurance, unloading from railway wagon, loading into truck, transport to stores, unloading, stacking, excluding GST levied by GOI & GOM in all respect etc. complete as per IS - 3589 and IS-5504 as applicable as per specifications (No negative tolerance in thickness is permissible).
4.1. Dia of Pipe : 200.00 mm (I. D.) Thickness of pipe :
4.1.1. 4) iv) 8.00 mm. | 40 | Running Meter | - | - |
| 9 | 4.2. Dia of Pipe : 250.00 mm (I. D.) Thickness of pipe :
4.2.1. 4) 8.00 mm. | 12 | Running Meter | - | - |
| 10 | 4.3. Dia of Pipe : 300.00 mm (I. D.) Thickness of pipe :
4.3.1. 6) 10.00mm. | 6 | Running Meter | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.74 MB
BOQ_2233926.xls
BOQ • 0.30 MB
TenderDocument.pdf
Tender Documents • 0.36 MB
ItemSpecification.pdf
Other Document • 0.04 MB
Download all tender documents and submit your bid