S R OF DAMAGED BRIDGE OF BELAN RIVER LOCATED AT RAJGARH SHAGANJ ROAD

Restoration of rain cuts with soil, moorum, gravel or a mixture of these, clearing the loose soil, benching for 300 mm width, laying fresh material in layers not exceeding 250 mm and compacting with plate compactor or power rammers to restore the original alignment, levels and slopes

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications

Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification

RCC Grade M25 using batching plant transit mixer & manual placing

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes D.S.R 10.16.1 (154.90/1.1505)=134.64

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture D.S.R 13.62.1 (191.40/1.1505)=166.36

Supply and fixing of Retro reflective sign with a corr0sion rasistamce 4mm thick aluminium composit pannel face to be fully coverd with high instensity prismatic sheeting type IV as per irc 67:2010 retroreflective sheeting with ms angle frame etc complete

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. . clause 1500, 1700 & 2100 (M-15)

Stone Masonry Work in Cement Mortar 1:3 in Foundation complete as per Drawing and Technical Specifications. Clause 1300.

Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications clause 1300& 2200.

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. clause 1500, 1700 & 2100 (M-20)

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications

Please Enable Macros to View BoQ information