REPAIR/ MAINT OF PIPE LINE, WITH CONNETED ITEMS IN TECH AREA AFS CHAKERI KANPUR

Amount

Attending of day to day complaints of water supply of all nature i.e. leakage in water GI pipe lines ,fittings /fixture , no water supply including all type of complaint noted in complaint register all complaints slips received from the complaint cell and deposit the complaint slip after reactification and obtained signature of users with necessary T & P with experienced one pipe fitter and one helper and GI fittings i.e. elbow, tee, reducer, union, long screw socket ,nipple ,plug etc including necessary excavation ,returning filling work complete all as directed . Note : The complaint shall be attended and defect shall be rectified with in 24 hrs commencing from the date and time of notifying the complaint failing which a penalty @ Rs 100 per complaint per day shall be recovered from Bill.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out for taking out/laying pipes in soft/loose soil complete all as specified and directed.

Returning, filling in and including spreading levelling watering and well ramming in layers not exceeding 25cm thick in solf/loose soil after pipes are laid complete all as specified and directed .

Removing of excavated material not exc 50 mtr distance and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Taking up/ down of 15 mm bore steel tubing and connections from excavated trenches and building up to tripple storey with due care including removal from site complete all as specified and directed.

All as per item No 5 but size 20 mm bore

All as per item No 5 but size 25 mm bore

All as per item No 5 but size 40 mm bore

All as per item No 5 but size 50 mm bore

All as per item No 5 but size 80 mm bore

M&L for GI pipe medium grade ISI marked with all necessary fittings laid in trenches / floor /wall or cealing of size 15mm bore. Note : For Sl item No 11 to 16, pipe line shall be laid in new location or in replacement of existing pipeline and credit material will be measured accordingly

All as per item No 11 but size 20mm bore

All as per item No 11 but size 25mm bore

All as per item No 11 but size 40mm bore.

All as per item No 11 but size 50mm bore.

All as per item No 11 but size 80 mm bore.

Re-fixing old steel tubing and connection in new or old position in trenches/wall/ ceiling/ floors etc with using new fittings complete as directed of sizes 15mm bore

All as per item No 17 but size 20mm bore

All as per item No 17 but size 25mm bore

All as per item No 17 but size 40mm bore

All as per item No 17 but size 50mm bore

Taking up/down cast iron water main 100 mm bore (including all fitting) with spigot and socket end and joints including burning out joints and recovering lead complete all as specified and directed.

All as per item No 22 but size 150 mm bore.

All as per item No 22 but size 200 mm bore.

All as per item No 22 but size 250 mm bore.

Relaying old CI/ DI pipe in new or old position of size 100 mm here in before including cleaning of pipes , cutting to required length etc. as per site requirement by using previously used and additional run lead , spun yarn including caulking to make the joints water tight complete all as specified and directed.

All as per item No 26 but size 150 mm bore.

All as per item No 26 but size 200 mm bore.

All as per item No 26 but size 250 mm bore.

Supply & fixing in replacement of Gun metal Gate valve ISI marked with Iron wheel, head screwed both ends for Galvanised Iron pipe for sizes 15mm bore all as directed by Engineer in Charge.

All as per item No 30 but size 20mm bore

All as per item No 30 but size 25mm bore

All as per item No 30 but size 40mm bore.

All as per item No 30 but size 50mm bore.

Supply & fixing in replacement sluice valves 250 mm dia class PN-1.0 , IS-14846 with flanged ends, stainless steel spindle and iron wheel including nut bolts and rubber packing complete all as directed by Engineer in Charge.

All as per item no 35 but 200mm bore

All as per item no 35 but 150mm bore

All as per item No 35 but 100mm bore

M&L for centrifugally cast (spun) ductile iron pressure pipes 100 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K-7 suitable for rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 complete all as specified and as directed . Note :-Cost includes fixing of Rubber gasket joint. Note : For Sl item No 39 to 42, pipe line shall be laid in new location or in replacement of existing pipeline and credit material will be measured accordingly

M&L for centrifugally cast (spun) ductile iron pressure pipes 150 mm bore for water with socket & spigot ends confirming to IS 8329/2000 in any length for classification of K-7 suitable for rubber gasket push on with cement mortar lining inside the pipe with outside zinc coating as per IS 8329/2000 complete all as specified and as directed . Note :-Cost includes fixing of Rubber gasket joint.

All as per item no 40 but size 200mm bore

All as per item no 40 but size 250mm bore

M&L for Laying, jointing and leakage testing of 15mm dia 'U' PVC Pipe including supply and fixing of all fittings such as bend, tee, elbow, union, reducer etc, laid in trenches / floor/ walls etc all as specified and as directed. Notes : (i) The laying and jointing of pipes are required to be carried out in short / long streches catering to specific requirements of a particular building.Make-Finolex/Supreme or equivalent

All as per item No 43 above but, 20 mm dia

All as per item No 43 above but, 25 mm dia

S&F 'U' PVC ball valve for 'U' PVC pipe of the following size 15 mm bore.

All as per item No 46 above but, 20 mm Bore

All as per item No 46 above but, 25 mm Bore

S & F in replacement MS Column pipe screwed 150 mm dia 3 mtr long having wall thickness not less than 7.1 0 mm ERW , with MS angle heavy duty on both sides confirming to IS 6392 with provision of 08 nos. Holes welded all around with pipe for rigidness and 4 nos. Ribs 10 mm thick including 2 mm thick rubber sheet and steel nut and bolts 10 mm dia of suitable lengths and washers shall be confirming to IS 4272 table. NOte : Rate quoted shall deemed to be inclusive of lifting of existing column pipe from bore and fixing of new column pipe at position complete with necessary nut bolt, packing, etc as required

Supply, installation, testing and commissioning in replacement of Submersible pump set electric driven, ISI marked, , pump with bronze impellars, CI casing, with ss shaft, leaded bronze bearings, / bushes , complete all as per IS- 8034 with copper wound submersible motor suitable for 415 Volts , 3 phase, 50 Hz supply of suitable HP, stain less steel tubing as per IS-9283 of 2013 ( suitable for 200 mm dia borewell ) with Head 96-110 mtrs and discharge 1200-1400 LPM, 5 stage complete Make- KSB or equivalent. Note : Old pump shall be deposited to MES store.

S & F in replacement of Electric cable for submersible pump set, flat 16 Sqmm 3 core stranded copper conductor PVC sheathed cable all as specified and directed. Note : Old cable shall be deposited to MES store yard

Material and labour for CI/DI fittings upto 250mm bore such as bend, (any type, radius and angle) tapers of any type (straight bend, decreasing, increasing, flanged or double socketed etc) tail pieces, tee, single branch, 'Y' junction, double branch, cross collar, cap, plug etc including push on joints(tyton) complete all as directed.

Supply & fix in replacement of cast iron non-return valve 200 mm dia ncluding nut ,bolt ,washer and rubber packing complete all as specified

Supply & fix in replacement of cast iron non-return valve 150 mm dia including nut ,bolt ,washer and rubber packing complete all as specified

Supply & fix in replacement of cast iron non-return valve 100 mm dia including nut ,bolt ,washer and rubber packing complete all as specified

Supply and replacement of Bib tap 15 mm size ISI marked standard of PTMT any colour high pressure screwed for iron pipes and fixed.

S&F of chromium plated bib tap, cast copper alloy 15 mm bore dia with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

Cleaning of Pump house and all connected valve pits inside and outside and cleaning roof of building cutting of grass in side of boundary wall , surrounding of OHTs and complete remove the all waste materials approx area upto 500 sqmt complete all as specified and directed.

M&L in replacement for cast iron detachable joints ( D Joint), suitable for CI pipe line 100mm dia complete with full thread 12mm dia nut and bolts and washers incl two Nos rubber rings complete .

M&L in replacement for cast iron detachable joints (D Joint) suitable for CI pipe line 150mm dia complete with full thread 12mm dia nut and bolts and washers incl two Nos rubber rings complete

M&L in replacement for cast iron detachable joints (D Joint) suitable for CI pipe line 200mm dia complete with full thread 12mm dia nut and bolts and washers incl two Nos rubber rings complete

Material & Labour to repair leakages through lead joints from existing CI pipe of 250 mm bore , fittings, tee, bends tail pieces, connecting pieces etc by using previously used and additional run lead , spun yarn including caulking to make the joints water tight including excavation works as required complete all as specified and directed.

All as per item No 62 above but, 200 mm bore

All as per item No 62 above but, 150 mm bore

All as per item No 62 above but, 100mm bore

All as per item No 62 above but, 80mm bore

M&Lfor fixing in replacement ventury/ orifice arrangment made out of MS pipe 150 mm bore 7.0 mm thick 0.50mtr long(appx) including welding of flange at both end and five Nos. socket of 20 mm bore with fixing of nipple and gate valve of size 20 mm bore and one No. reducer of size 50 x 20 mm complete all as directed by Engineer in charge.

M&L for replacement of gland ,suitable for sluice valve 80 mm to 250 mm bore including replacement of worn out nut ,bolt and washer complete.

M&L for cutting of PCC/Hard standing/WBM road for passing of GI/CI pipes all as specified and directed . Note : Making good with PCC shall be measured and paid separetely under respective item.

M&L for cement concrete 1:2:4 Type B 1 using 20 mm graded stone aggregate complete all as specified and as directed by Engineer- in -Charge.

M&L for PCC 1:2:4 Type B2 using 40 mm graded stone aggregate as in foundation , filling and mass concrete complete all as specified and as directed by Engineer- in -Charge.

M&L in replacement MCCB 160 Amp ,Fore Pole ,36 KA adjustable type complete all as specified and as directed.

M&L in replacement for MCCB 125 Amp , four pole,16 KA adjustable complete all as specified and as directed.

M&L in replacement of GI nut and bolt of required size complete with washer for Sluice valve of size 80 mm upto 250 mm.

M&L (in replacement) for making translite colour print LED panel for water supply site plan of pump house and OHT's or any other purpose including using clear acrylic sheet, blurr acrylic sheet of suitable thickness, clipon edge lit LED frame with using of high resolution LED complete with adopter and necessary fixing arrangements for making LED panel, wall mounted complete all as specified and as directed. NOTE:- (i) Water supply site plan kept at AGE E/M-II office. (ii) Letters or characters size shall be as directed by Engineer-in-charge.

M&L for painting of existing power panel, orifice pipe arrangement, open pipe line and other misc items complete with suitable quality and approved colour of synthetic enamel paint as approved, all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, all as specified and directed

M&L for framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of Ladder in Over Head Tank and similar work con-forming to Fe 290.Gde-E-165 complete all as specified and directed. Note :- Necessary safty tools and measure should be the whole responsiblity of contractor and rate of all T & P included in quoted rates.

M&L forapplying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surface of any description exc. 10 cm width or girth complete all as specified and directed

Material and Labour in replacement for 3 core PVC insulated sheathed armoured stranded copper conductor cable of size 2.5 sqmm 1100 volt grade.

M&L (in replacement) for design, manufacture, supply, installation and comissioning LED display boards of following sizes having compact design and maintenance friendly, the base of the board made of ACP(aluminium composite Panel) 3 mm thick and back side of board covered with GI sheet 24SWG, the letters and borders made of acrylic sheet 3 mm thick of colour as approved by Engineer-in-charge, LED module should as per requirement of letter space, the display language may be English/Hindi(Alpha numeric), its visibility should be suitable for day & Night (Outdoor application) and should be visible upto 25.00m (minimum), the text effect should be static, the LED suitable for power supply 230 volts/50 Hz, AC with switch ON and OFF the power supply to the display boards, the board shall be suitably braced on back side with angle iron 40mmx40mmx3mm and making good of disturbed surfaces as per original including necessary connection with 3 core copper conductor cable 1.5 sqmm from LED display boards to ceiling rose complete all as specified and as directed:- (a) Rectangular board having max 40 letters or characters in English language letter or character size, height not exceeding 250mm and back depth max 65mm of suitable width. NOTE:- Angle iron 40mmx40mmx3mm including nuts, bolts and washers shall be measured and paid seperately under respective items of BOQ.

S & F in replacement fully automatic star delta starter suitable for 50 HP submerssible pump set including connecting all incoming and outgoing copper wire as directed . Make- L&T cat part No-MU-G 50. or equivalent in Havells/ Kirloskar

S & F in replacement fully automatic star delta starter suitable for 30 HP submerssible pump set including connecting all incoming and outgoing copper wire as directed . Make- L&T cat part No-MU-G 30. or equivalent in Havells/ Kirloskar

Supply & filling pea gravel for packing of size 3 to 5 mm to be designed by the contractor of natural shape brought direct from river bed and packing around the casing and slotted pipe in deep borewell all as directed by Engineer in Charge. Note: materials braught at site shall be stacked in plain surface for recording qty of materials and there after gravels shall be filled in borewell. after firrling of required level of gravels in borewell, remaining qty shall be recorded in MB. this shall be strictly in presence of Engineer in Charge.

S& F (in Replacemnt) Electronic microprocessor based digital & wire less type water level indicator with alarm at time of full level/Low level in over head tank of height upto 25 RM, including all eqpts accomodated in GI sheet box or completely enclosed complete including testing & Commissioning.. Make- Optic/SAPCON/Aquabrim

Testing of drinking water (chemical analysis) as per IS : 10500 from authorised / approved lab after taking the sample from Pump houses in steralised container as per guideline of medical authority all as specified & directed .

M & L for construction of valve chamber 900 x 900 x 900 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces incl dismantling and removal of old unserviceble valve pit remains all as specified and directed.

M & L for construction of valve chamber 600 x 600 x 600 mm internal dimensions, 6 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40x40x6 mm thick with lifting hook and locking arrangement complete with necessary earth work, brick work in CM (1:6), 230 mm thick, PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces incl dismantling and removal of old unserviceble valve pit remains all as specified and directed.

Preetpowercontrol (BID ID -3287967)

Anandeshwar Enterprises (BID ID -3292628)

H S ENTERPRISES (BID ID -3289273)