CA NO CWE/PAT/T-47/2020-21 SPECIAL REPAIR MD ACCN BLDG NO P-52 P-71 AND P-93 UNDER GE NORTH PATIALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec III (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Preparation of new plastered surfaces/existing platered surfaces and applying acrylic wall care putty in internal/external walls/RCC surfaces/soffits of chajjas/roof projections/ cantilevers /balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed. Make of Wall Putty : JK Wall Putty / Birla Wall Care Putty / Bison Wall Putty. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed.

S&F factory made flush shutters 35mm thick, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels, commercial type on both sides including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm with stainless steel screws - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including S&F of stainless steel 304 Grade (natural finish) wire cloth (wire dia. 0.20 to 0.22mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm with stainless steel screws - 3 nos per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 101.60 x 44.75 x 1.75 mm for chowkats or frame & shutters made of size 81.25 x 38.10 x 1.75mm for side rails and middle rail, 114.3 X 44.45 X 1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and including required nos of pivots / hinges and brass mortice lock (four levers) and two nos of key complete all as specified and directed including supply and fixing the following items: (a) Powder Coated Aluminium butt hinges 100mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and fixing factory made extruded aluminium casement windows with 80 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 127x38.10x1.74 mm and shutters made of 45x45x1.63mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 32 gauge in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf. (d) Powder coated Aluminium Grill made of 10 mm dia powder coated aluminium bar and 75 mm aperture of mesh of grill.

Providing and fixing factory made aluminium ventilators with 80 micron powder coating of frame of 127x38.10x1.74 and fixed shutter made of 45x45x1.63mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 32 gauge in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

Providing and Laying Premium (1st) quality straight edge, stain free, gloss finish, square marbonite single charged vitrified tiles in 600x600x 9 to 10 mm thick in floors/skirting etc. in approved shade, set & jointed in neat cement including and over 20 mm th screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified.

Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved/matching with wall tiles , set & jointed in neat cement including and over 15mm th screed bed in CM (1:4) and pointed in white or coloured cement to match, in floors etc. complete all as specified.

M&L for black telephonic texture granite, machine cut as in shelves/steps/ cills/ jambs/ skirting/border and the like works and flooring etc, 18-20 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves

S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets and finials fency type, stops fixed with ss screws etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

S&F vitreous china premium/1st quality wall hung wash basin, white, flat back, min. size 500x400 mm , screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete in all respect all as specified.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F 6mm thick looking mirror with smooth finish edges/sides fixed to wall with stainless steel brackets/plugs/connecter/spacers/ screws etc. chrome finish with wooden beading & applying three coats of french polishd over one coat of primer on wooden beading etc. complete fixed in position all as specified and directed.

S&F soap dish, stainless steel of suitable size to accommodate soap, tooth brush glass and tooth paste, fixed to wall with drilling screws complete all as specified and directed by Engineer in Charge..

S&F Corner unbreakable glass shelf 10 mm thick set of three with SS brackets fixed to wall with rawl plug and SS bolts complete all as specified and directed

S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified.

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe all as specified

S&F Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F Sink Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32 mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mm x 458 mm with bowl size 410 x 355 x185/ 430x 355 x200mm including bottle trap 32 mm with 125mm and 175 mm long with wall connection pipe and flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed.

S&F stainless steel plate racks, glossy finish, for kitchen overall size 900mm x 600mm complete fixed in position as recommended by manufacturer with SS screws/fasteners etc all as directed.

S&F towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work & scaffolding where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

M&L Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 mm micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm all as specified

S&F factory made pre-laminated PVC solid board 18 - 20 mm thick prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cup board front shutters complete fixed in position in all respect all as specified including supply and fixing of following items :- (a) Stainless Steel (304 Grade) Finished Tower Bolt 200 mm long - 01 Nos per leaf. (b) Stainless Steel (304 Grade) Finished Handle 200 mm - 01 Nos per leaf. (c) Stainless Steel (304 Grade) Finished magnetic cathers - 02 Nos per leaf. (d) Stainless Steel (304 Grade) Finished Hasp and Staple - 01 Nos (e) Continous (piano) hinges 30mm. stainless steel 304 grade - 01 No Per Leaf. (f) Stainless steel towel rod of 20 mm dia for hanging of cloth etc - 01 No (g) Stainless steel 5 to 6 Nos hanging hooks - 01 No (For Cupboard only)

&F pre-laminated PVC solid board as in frames for cupboard shutters 40mm thick (double sandwiched of 20mm) prelaminated on one side with wooden finished fixed in position complete all as specified

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (when open) is 30 mm, complete all as specified.

M&L for Baroda Green marble, machine cut as in shelves/steps/landings/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

S&F PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete in all respect as specified.

S&F PTMT 450mm long shelf for wash basin. Fixed in position complete in all respect all as specified.

S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified.

&F central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed.

Disconnecting existing tanks of any capacity from 350 to 500 Ltrs, setting aside (or lowering if required) for repairing, cleaning, etc. and hoisting if required reconnecting and S&F tank cover with nut & bolts and 20mm dia brass float valve, changing of chuk nuts, socket and re-fixing in position after cleaning the tank complete all as specified and directed.

S&F CP peg set of 6 hooks and including all accessories like screws etc as recommended by manufacturer and complete fixing in position complete all as specified.

Taking down steel cupboard exc 1.00 Sqm and n. exc 2.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F 18 mm thick LEAD FREE PVC Celuka ply as in frames of size 75X40mm of both side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed.

S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs,

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified.

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

M&L for fixing Iron Rawl Type Anchor Fastener 12mm dia and 125mm long incl washer etc for fixing MS frame work to brick/RCC/concrete structures complete all as specified.

M&L for ACP sheet of 4mm thickness of approved plain colour/shade for chajjas/sun-shades/cladding and the like works etc. fixed to frame work of MS/aluminium/hollow sections of any size description including finishing all the joints with silicon or as per manufacturer's instructions complete in all respect and complete fixed in position incl scaffolding/ladders etc as required and also making the joint between wall and chajjas/sun-shade water proof all as specified. Note : Frame Work shall be measured and paid separately.

M&L for Vitreous china squatting pan of Orissa pattern size 580 x 440mm white with (including CI 'P' or 'S' trap long size) joint run lead front or back inlet with integral footrest including connection to trap and to flushing cistern pipe, anti syphonage pipe etc fixed in repair complete and making good to floor in CM 1:3 complete all as specified and directed by Engineer in Charge.

Scrapping surfaces of roof by wire brushing and removing all loose dust and cleaning and washing down the surfaces with water complete all as specified and directed.

M&L for rubber moulded chequered cement concrete tiles 300 x 300 x 25 mm set and jointed and pointed in neat cement slurry in floors including screed bed or bedding layer of mortar 15 mm thick for laying floor finish in cement mortar 1:6 complete all as specified and directed by Engineer in Charge.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

M&L for factory made, unreinforced precast cement concrete tiles of size 250mm x 250mm x 22mm machine pressed as on roof surface conforming to IS 1237-1980, laid over and including 15mm thick screed bed in CM 1:4 including mixed with WPC (WPC shall be paid separately) set and pointed with grey cement slurry complete all as specified and directed by Engineer in Charge.

M&L for point wiring with 1.5 Sqmm (22/.3mm) PVC insulated and unsheathed FR single core stranded copper conductor for one light / fan in Existing PVC conduit medium grade 19/20 mm dia to be terminated in and including pressed steel terminal boxes with modular cover plate including 1.5 sqmm (22/.3 mm) PVC insulated and unsheathed FR single core stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed. NOTE :i) Switch and regulators shall be measured and paid for seperately. (ii) Wiring shall be done as per colour code in IS for phase, neutral and earth. (iii) Rate of modular metal flush box and modular cover plate are included in this item.

All as per item No 74 here in before but one socket out let 5 Pins 5 Amps on the same board but with other switches complete all as specified and directed.

All as per item No 74 here in before but one 5 Amp socket on independent board but with other switches complete all as specified and directed.

M&L for point wiring with two single core PVC insulated cable with copper conductor of size 2.5 Sqmm in concealed rigid non metallic NEW PVC conduit on wall / ceiling with all fittings such as tee, bend, elbow, socket etc including sunken pressed steel terminal board of suitable size made out of 2 mm thickMS Sheet and 3 mm thick plastic laminated sheet cover to fix S/S combination (ISI marked) of suitable size, making good the disturbed portion of wall / surface and all accessories alongwith 1.5 Sqmm PVC insulated solid copper conductor for continous earthing on independent board complete all as specified and directed by Engineer in Charge. Note : Rate of Modular metal flush boxes and modular cover plate are included in this item.

M&L for point wiring with two single core PVC insulated cable with copper conductor of size 2.5 Sqmm in concealed rigid non metallic EXISTING PVC conduit on wall / ceiling with all fittings such as tee, bend, elbow, socket etc including sunken pressed steel terminal board of suitable size made out of 2 mm thickMS Sheet and 3 mm thick plastic laminated sheet cover to fix S/S combination (ISI marked) of suitable size, making good the disturbed portion of wall / surface and all accessories alongwith 1.5 Sqmm PVC insulated solid copper conductor for continous earthing on independent board complete all as specified and directed by Engineer in Charge. Note : Rate of Modular metal flush boxes and modular cover plate are included in this item.

S&F LED batten Tube Light fitting 1 x 20 Watt, 2 Ft long including LED tube rod, 3 core flexible wire 0.5 Sqmm copper cable including taking down old unserviceable tube light fitting of any description all as specified and directed.

S&F LED batten Tube Light fitting LED type retrofit T-8, 20 Watt, 4 Ft long including LED tube rod, 3 core flexible wire 0.5 Sqmm copper cable including taking down old unserviceable tube light fitting of any description all as specified and directed.

S&F LED batten Tube Light fitting 1 x 10 Watt, 2 Ft long including LED tube rod, 3 core flexible wire 0.5 Sqmm copper cable including taking down old unserviceable tube light fitting of any description all as specified and directed.

S&F bulk head fitting LED type including 1 x 9/10 Watt LED lamp with 3 core flexible wire 0.5 Sqmm copper cable including taking down old unserviceable tube light fitting of any description all as specified and directed.

S&F MCB DB TPN 4 ways, VTPN series double door, 415 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounted type drilling holes for incoming and outgoing cables complete all as specified and directed by Engineer in Charge.

S&F MCB single pole and neutral SPN 240 volts 25 to 32 Amp capacity fixing in DBs including proper thimble connections complete all as specified and directed by Engineer in Charge.

S&F environment friendly, ultra modern, energy efficient, surface mounted, decorative ovak bulk head LED light high brightness of 10 W complete all as specified and directed by Engineer in Charge.

Taking down unserviceable building security light fitting of any size / type and supply and fixing of powder coated pressure die cast aluminium compact LED security light fitting of 25 watt with LED lamp including mounting arrangements i.e. GI pipe of suitable size, clamp, nut bolts complete all as specified and directed by Engineer in Charge.

S&F LED Security light fitting 30 - 35 wattcomplete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer in Charge.

Hanging only ceiling fan after necessary point wiring complete all as specified and directed by Engineer in Charge.

S&F electric meter digital type single phase complete all as specified and directed . Note : Old meter to be deposited in MES store yard.

S&F LED bulb 7 watt complete all as specified and directed by Engineer in Charge.

S&F exhaust fan 300 mm sweep complete all as specified and directed by Engineer in Charge.

S&F geyser 25 Litre capacity complete all as specified and directed by Engineer in Charge.

Swami Engineers

Arneja Builders

HG construction

M/s Pioneer Construction Co.

Karishan Kumar goel

M/S RAJ KUMAR GUPTA